Availability
Showing In Stock Items. Show All 89 Items.
Hitachi offers mass air flow sensors for countless cars, trucks, and vans. These stock replacements are built to OEM specifications for performance and longevity. MAF sensors play a fundamental role in your vehicle, measuring the amount of air entering the internal combustion engine. Hitachi's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the mass air flow sensor recommended for your application.
( 4 )
$76.99
NGK Iridium IX spark plugs feature an ultra-fine center electrode that's designed just thick enough to ensure the maximum durability and life of the spark plugs—and just thin enough to create an accurate and consistent spark. They represent the ultimate evolution of spark plug technology and performance. Iridium is the hardest metal used in spark plugs today—six times harder than platinum. This allowed NGK engineers to reduce the voltage requirement for a spark. Iridium IX plugs are available in more than a hundred configurations for universal and vehicle-specific applications.
( 250 )
$9.99
Energy, efficiency, and ecology--that's the E3 equation! The unique patented electrode configuration of the E3 spark plugs increases the amount of combustion pressure created during each power stroke of an engine. This, of course, results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines.
( 703 )
$7.99
Replace your vehicle's corroded battery terminals with new ones from Dorman. They offer reduced labor-time and cost-savings by replacing the damaged original terminal, instead of the entire battery cable. Dorman battery terminals are easy-to-install, direct replacements that will restore the proper flow of current to your vehicle's electrical system.
( 2 )
$13.99
—
$16.99
NGK Ruthenium HX spark plugs are designed for newer engines which demand high ignitability. Double Fine Electrode (DFE) engineering promotes spark energy concentration and ignites a wider range of air/fuel ratios, offering improved performance in rich or lean engine conditions. Order the plugs recommended for fitment on your application. Additional details: * 0.4mm Ruthenium alloy fine-wire center electrode and 0.8mm platinum fine-wire ground electrode * Trivalent metal platinum provides superior anti-corrosion and anti-seizing properties * Corrugated ribs prevent flashover * Pure alumina silicate ceramic insulator offers superior strength and better heat transfer * Copper core aids in heat removal
( 36 )
$13.99
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. Hitachi ignition coils provide the performance needed to help keep vehicles running the way that they were designed. The Hitachi ignition coils feature a durable construction to ensure maximum reliability and a longer service life, and when combined with the correct spark plugs, they provide consistent voltage and amperage output, thus ensuring efficient combustion, as well as smooth power delivery. Choose the Hitachi ignition coil model designed for your application needs.
( 7 )
$57.99
Champion iridium spark plugs have a stabilizing effect on ignition voltage, as well as excellent wear characteristics. They're quickly becoming the technology of choice for engine manufacturers worldwide. These plugs feature a fine-wire iridium center electrode that's laser-locked to the center electrode, and a platinum V-trimmed ground electrode to ensure maximum life and erosion resistance. They come with their exclusive Heat-Active alloy to reach operating temperatures quickly and maintain stable temperatures under varying engine loads. The plugs will deliver a consistently focused spark that provides the highest level of engine performance possible, regardless of engine type or ignition. Order the model designed for your vehicle application.
( 43 )
$7.99
The average vehicle today has hundreds of wiring connectors. ACDelco connectors are available for everything needed, from antennas to trailer wiring, as well as an array of multi-purpose connectors to maintain the optimal operation of your vehicle. Choose GM-recommended replacement wiring connectors to ensure the same performance, durability, and service life you've come to expect from General Motors products.
( 35 )
$4.99
High-quality, direct-replacement Standard Motor wiring connectors help eliminate the need for a harness by letting you swap only the damaged connector for a cost-effective repair solution. The terminals feature high-grade materials like copper alloy, brass, and phosphor bronze. Together they provide the connectors with prolonged life and superior performance in harsh environments for each specific application. Standard Motor electrical connectors are 100 percent tested for the proper mechanical and electrical fit, form, and function for your vehicle.
( 139 )
$10.99
—
$35.99
Summit Bucks
Delphi mass airflow sensors are the OE parts that your vehicle should have come with! Their MAF sensors are new, not remanufactured, and feature fast response for outstanding performance over a wide range of ambient temperatures. Delphi mass airflow sensors are engineered to provide your ECM with continuous, precise information to ensure optimal performance, fuel economy, and reduced emissions. Give your vehicle new life--replace worn OE parts with Delphi mass airflow sensors.
( 99 )
$114.99
Why not replace that mass airflow sensor yourself? Doing the work on your car can save you money, but it can be a hassle. Beck/Arnley new OEM mass airflow sensors are the best to ensure optimum performance, while offering a direct fit to your old model. Make your life easy with the right parts for proper engine management with Beck/Arnley new OEM mass airflow sensors.
( 2 )
$64.99
Summit Bucks
Delphi vehicle speed sensors offer an accurate, clean signal input to your vehicle's ECM. Their designed digital output gives the maximum signal to noise ratio and they will maintain optimal performance during drastic temperature changes for robust, long-lasting sensor protection due to their single-element design. Delphi vehicle speed sensors provide quality materials, extended life, improved reliability, and superior drivability.
Not Yet Reviewed
$36.99
—
$64.99
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$54.99
Standard Motor accelerator pedal sensors indicate the position of the accelerator pedal by converting pedal movement and position into electrical signals. These sensors are direct replacements for the factory components.
( 49 )
$51.99
You turn the key—but something is amiss. Your vehicle won't start, the turn signals won't blink, or one of the many other accessories fails to function properly. The problem could be a blown fuse. Dorman battery circuit fuses can quickly restore power to electrical components throughout your car or truck. These direct-fit replacements require no special tools for installation, and are available for a variety of makes and models.
( 1 )
$20.99
Denso alternators are not only original equipment on many of the world's top production cars; they are a favorite in motorsports as well, where their light weight, high-efficiency, and durability make them the natural choice. Denso remanufactured alternators go through a grueling process; stators and rectifiers are tested to 300 V, while rotors are submitted to 600 V, to ensure reliable performance. Rotor slip rings are buffed to an 8 micron surface finish, with run out limited to 20 microns, minimizing brush wear and abrasion. Bearings are validated to OE standards and loaded with premium OE-specification lubricants. Offered in wide range of amp ratings for hundreds of specific vehicle applications, all alternators meet Denso's rigorous First Time Fit standards. Contemporary vehicles employ dozens of sophisticated electronic systems, placing heavy demands on the charging system. The alternator is no place to cut corners. Additional features of Denso remanufactured alternators include: * Meet or exceed all manufacturer standards, and provide years of reliable service * First Time Fit provides perfect mounting with no belt/pulley alignment issues * Housings re-tapped and damage-checked for heat warping, corrosion, or improper surface alignment * Voltage regulators 100 percent tested to OE standards * All hardware stripped and replated * Premium cores and precise OE-assembly benchmarks * Designed to meet grueling heat and electrical requirements * OE-quality fit and appearance * Full compatibility with sensitive electronics systems
( 52 )
$287.99
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 102 )
$81.99
The camshaft position sensor monitors the rotating position of the camshaft relative to the crankshaft position. This data is sent to the vehicle's ECU, where it is used to adjust the spark timing and the operation of the fuel injectors. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts camshaft position sensor line has superior coverage for domestic and import applications.
( 2 )
$34.99
Holstein Parts ABS sensor line has superior coverage for domestic and import applications. Anti-lock Braking, ABS Systems allows the driver to maintain control of the car in an emergency braking situation. The ABS system relies on sensors to monitor the wheel's speed and communicate with the ABS computer to ensure ideal performance. The data from the ABS sensor then allows the computer to balance the speed of each wheel to prevent the brakes from locking up and avoiding dangerous skidding situations. Holstein Parts focuses on using only the highest quality materials for their products, all parts are manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part.
( 3 )
$41.99
—
$57.99
Vehicle speed sensors measure wheel speeds and provide this information to the vehicles ECU (Electronic Control Unit). The ECU then calculates ignition timing, transmission shift points, and air/fuel ratios for the vehicle. Data from the Vehicle Speed Sensor is also used in cruise control systems to maintain a constant speed. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts vehicle speed sensors line has superior coverage for domestic and import applications.
( 4 )
$47.79
—
$59.99
The variable valve timing solenoid alters the supply of oil pressure to the camshaft depending on the engine's speed and load and can either advance or retard cam position, which provides several benefits, including improved engine operation increased engine power, reduced fuel consumption, and decreased emissions. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts variable valve timing solenoids offer superior coverage for domestic and import applications. Order the model designed to fit your application needs.
( 1 )
$94.99
—
$113.99
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$48.99
Injen X-Pedal Pro Black Edition throttle controllers are the next step in customizable throttle response controllers. Quickly and easily tune out the delayed throttle response from the factory for a completely new driving experience. You'll be amazed how different your vehicle feels after this quick and simple install. Modern vehicles are infamous for a sluggish and delayed throttle response feel directly from the factory. You'll recognize this built-in delay when trying to accelerate to pass another vehicle or merging into traffic. Injen X-Pedal Pro Black Edition throttle controllers let you adjust the pedal feel and ultimately the throttle response of your vehicle directly on-the-fly. The controllers require less than five minutes to install and deliver immediate, customized performance for your vehicle. Order the kit recommended for your vehicle. Features and benefits include: * Works with performance upgrades * Mode memory * No wires to cut or holes to drill; it's literally a plug-and-play unit * Lock the throttle * Built-in high-speed processor greatly improves throttle signal * Sport Mode: 9 levels, suitable for mountain roads and racing * ECO Mode: 7 levels, suitable for driving in city areas which can improve fuel economy * Anti-skid function allows your vehicle to launch on lower friction surfaces with ease * Launch Control/Drag Race Mode: Lets you reach max acceleration faster * DAC (Digital to Analog Convert
( 8 )
$243.75
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 22 )
$153.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
