Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
2012 Parts and Accessories
On Sale
Holley Mid-Mount Complete Accessory Systems
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 106 )
$2,202.95
—
$4,509.95
$1,981.95
—
$4,057.95
On Sale
Holley Terminator X MAX Engine Management Systems
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 91 )
$1,849.95
—
$2,559.95
$1,663.95
—
$2,302.95
On Sale
MSD Ignition Control Units
MSD ignition controls are the most successful aftermarket ignitions ever made. The multiple spark design has won races and championships in every type of motorsport. MSD ignitions are consistent, reliable and durable, even under extremely harsh conditions. The results speak for themselves--more power, easier starting, quicker throttle response, smooth idle, and improved fuel consumption.
( 37 )
$562.95
—
$564.95
$505.95
—
$507.95
On Sale
Range Technology AFM/DFM Disabler Devices
All cylinders, all the time! Get the most out of every mile with a Range Technology AFM/DFM Disabler Device. These modules allow your V6 or V8 GM vehicle to run in full cylinder mode at all times. This patented technology is the only product that will disable AFM or DFM without reprogramming the factory ECU. You get full power delivery all the time without factory warranty concerns. Additional features: * No more shuddering or dropping cylinders * Fast and easy setup; simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM or DFM system * No tools needed; simply remove to uninstall * All-terrain power and control in any situation—bad weather, off-road, and carrying heavy loads * Safe and reversible: leaves no trace; unplug it to return to factory settings * Fits all V6 and V8 General Motors AFM/DFM vehicles, including cars, trucks, and SUVs * Device is available in multiple color options
( 224 )
$265.95
$239.35
On Sale
Holley Terminator X Engine Management Systems
Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)
( 96 )
$1,399.95
—
$1,949.95
$1,258.95
—
$1,753.95
On Sale
MSD 8.5mm Super Conductor Spark Plug Wire Sets
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1993 )
$120.95
—
$122.95
$108.85
—
$110.65
On Sale
Holley Aluminum LS Valve Covers
Holley aluminum LS valve covers will give your Chevrolet LS Series engines a totally new look. Manufactured from cast aluminum, they come in four different finishes, and feature a billet aluminum oil fill cap. Some valve covers in this series eliminate the need for the factory ignition coil bracket. Instead, the coils bolt directly to the valve covers for a nice angled look! Holley aluminum LS valve covers reuse the factory gaskets and bolts, will work with .750 in. lift camshafts using stock-style rocker arms, and fit all ignition coils with 72mm spacing.
( 146 )
$292.95
—
$799.95
$260.10
—
$718.95
On Sale
Edge Insight CTS3 Monitors
Edge Insight CTS3 monitors are the most comprehensive, state-of-the-art, multi-gauge touch screen display on the market. This third generation design is faster and more capable than ever. A simple installation that just plugs into an OBDII port and works on most domestic gas and diesel vehicles. They are the perfect tool for those who want to monitor their vehicle's performance and prefer not to program their vehicle--or for those who already have significant performance upgrades and want to safely monitor their vehicle's performance. Edge Insight CTS3 features include: * 5 in. full color, 720P high-resolution, swipe screen * 1 GB of on-board Ram * High-speed data logging export * Test and track performance runs such as 0 to 60 mph and 1/4 mile * Log, graph, and export parameters to track for improved performance * Set audible and visual alert notifications when certain parameters or temperatures are met * Multiple shift-on-the-fly performance tuning settings with EAS * Custom color mixer for gauge arcs, needles, and backgrounds * Multiple gauge screen layouts * Fully customizable backgrounds * One-touch easy menu navigation * Notification center * Switch between US or metric units of measure * Displays dozens of parameters * Light sensitivity meter to dim screen as ambient light decreases * Wi-Fi update-able * Backup camera adaptable
( 23 )
$511.95
$459.95
On Sale
MSD LS 2-Step Launch Controls
GM performance fans will be geeked to learn about MSD's direct plug-in 2-Step launch controls for LS engines. These units are easy to install with factory-style connectors for a splice-free installation. When you're staged, you can hold the pedal to the floor, while the rpm stays at a consistent level, producing consistent launches.
( 86 )
$357.95
$322.15
On Sale
DiabloSport PredatorX Tuners
DiabloSport PredatorX tuners deliver the latest in tuning technology, allowing you to take control of your tuning needs from your smartphone. The iOS/Android compatible apps pair with the PredatorX dongle to give you complete tuning access from your pocket. The OBDII dongle can stay connected to the vehicle full time, so you're always just seconds away from being able to make tuning changes. The tuners are preloaded with power adding tunes for multiple octane levels, as well as transmission tunes for applications where they are needed. For those seeking more than the provided tunes offer, there is a plethora of end user based parameters that can be adjusted. Speed limiter, tire size, timing and fueling at wide-open-throttle, rev limiters, idle speed and so much more can be adjusted through the PredatorX. Features: iOS and Android support Tune from your smartphone! Preloaded with Performance tunes Trucks get tunes for 87 octane and Premium fuel Performance cars get tunes for 91 and 93 octane fuel TCM tunes are included End user adjustable parameters Disable AFM! Calibrate Speedometer for Taller Tires Set axle ratio if you've swapped gears Remove Speed Limiter Adjust Idle Speed Raise Rev Limiters Live data monitoring Read/Clear Diagnostic Trouble Codes (DTCs) Adjust options like idle, speed limiters, rev limiters, tire size, gear ratios and more. Support for 07-18 GM gas trucks and SUVs, 05-19 Corvette, and 10-24 Camaro V8, and more!
( 16 )
$302.95
$272.65
On Sale
Holley EFI LS Hi-Ram Intake Manifolds
Holley EFI LS Hi-Ram intake manifolds are designed for your high performance race engine. Big cube and high-rev applications without height limitations are the intent for these manifolds. The modular design of these Holley Hi-Ram intake manifolds offers a runner length and as-cast tapered cross-section design that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with EFI LS Hi-Ram intake manifolds from Holley.
( 39 )
$1,177.95
—
$1,349.95
$1,059.95
—
$1,213.95
On Sale
Holley LS Coil Harnesses
Holley LS coil harnesses are factory replacements for stock LS coils. These EFI LS coil sub harnesses are intended to be used with factory LS coils and various Holley EFI main harnesses with coil-on-plug connectors. They are built with the same high-quality connectors and wire loom found on all Holley EFI harnesses, guaranteeing a perfect match in your engine bay. Are you tired of scouring the junkyard for stock LS coil sub harnesses? Holley has the solution. Holley LS coil harnesses feature: * OEM connectors provide a secure connection between your ECU and Ignition Coils * Techflex F6 braided wire loom keeps your engine bay looking clean, while providing abrasion resistance * Plug-and-play fitment * Can be used to replace a damaged factory coil harness
( 18 )
$204.95
$184.45
On Sale
DiabloSport inTune i3 Platinum Computer Programmers
DiabloSport inTune i3 Platinum computer programmers come pre-loaded with industry-best Diablo tunes created by their experienced, professional calibrators. They too, are performance enthusiasts addicted to horsepower and racing—and they appreciate the need for custom tunes to take their vehicles to the next level with additional modifications. inTune i3 Platinum units will get your ride "dialed-in," whether you've added a cam, headers, a supercharger, or power-adder. The i3 performance programmers work hand-in-hand with CMR (Chip Master Revolution), allowing you (and the tuning shop of your choice) to tune specifically for your aftermarket modification—from there, the sky is the limit! You've made a significant investment in premium parts for your vehicle. Now let the DiabloSport inTune i3 Platinum computer programmers tie all the ingredients together to make your ride stand out! Order the model designed for your vehicle application.
( 150 )
$475.95
$427.95
On Sale
MSD Blaster OEM Replacement Coils
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 630 )
$60.75
—
$716.95
$54.68
—
$644.95
On Sale
Baer Brakes Classic Disc Brake Kits
You have asked, and Baer has answered! Baer is bringing back the original Baer Claw brake system that started it all, with the introduction of their Classic Series disc brake kits. They are direct bolt-ons for early GM, Ford, and Mopar applications. Front kits feature aluminum 2-piston, pad-guided calipers and vented 11 in. rotors, while the rear kits feature cast iron single-piston calipers and solid 10.5 in. rotors for maximum clearance on small wheel applications. You want to modernize your early muscle car, fit stock wheels, have easy access to replacement parts, and not break the bank. Baer Classic Series brake kits are your answer! Features include: * Red powdercoated calipers * Braided brake hoses * Slotted and drilled rotors
( 37 )
$665.95
$598.95
On Sale
B&M Tork Master Torque Converters
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 184 )
$460.95
$413.95
On Sale
Holley Sniper Throttle Bodies
With Holley Sniper throttle bodies, Holley engineers went back to the drawing board to build the ultimate air valve for your engine! They feature enlarged bore sizes, allowing for increased airflow to support your higher horsepower needs. A progressive throttle pulley enhances low-speed drivability, and a double return spring provides solid and secure throttle control feel. These units are maximized for your application, with a 4-bolt style mounting pattern; most models include bolts and gaskets. Order the throttle body designed for fitment with your year/make and engine family.
( 40 )
$255.95
—
$349.95
$197.36
—
$295.15
On Sale
MSD Atomic AirForce Intake Manifolds
When you're serious about power for your LS or new LT1 engine, call in the AirForce! MSD Atomic AirForce intake manifolds have been designed using Computational Fluid Dynamic Modeling to create optimal plenum volume and efficient paths for improved airflow and distribution to stock and modified engines. Their unique bell-mouthed runner entrances maximize airflow and minimize shrouding--efficiently using the available plenum volume for an unobstructed flow path over opposing runners. The 2-piece molded polymer design resists heat soak, minimizes weight, and allows easy access to the runners for porting. MSD Atomic AirForce intake manifolds accept an OEM or 103mm throttle body, as well as stock, aftermarket, or Atomic LS EFI fuel rails. They are supplied with new gaskets and hardware for a direct bolt-on package. The 103mm throttle bore allows the use of large throttle bodies for greater airflow, and a direct-flow path runner design promotes maximum airflow.
( 19 )
$1,399.95
—
$1,449.95
$1,258.95
—
$1,303.95
On Sale
MSD Street Fire Coils
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 645 )
$47.24
—
$511.95
$42.52
—
$459.95
On Sale
MSD Ford Blaster Coil-on-Plug Ignition Coil Packs
These MSD Ford Blaster Coil-on-Plug ignition coil packs feature a patented winding design and direct bolt-in replacement. The improved spark energy and voltage of the coil packs, combined with their reliability, have made them a favorite of performance enthusiasts. They are designed as direct bolt-in replacement coils for many SOHC Ford V8 modular engines. The housing and installation are the same as the factory coils, but that is where the similarity ends. Inside the MSD coil packs, engineers used better quality materials to assemble the primary and secondary windings. The MSD Ford Blaster Coil-on-Plug ignition coil packs take the spark energy right out of the coil and put it across the plug gap to improve the combustion and output of the engine.
( 365 )
$99.95
—
$535.95
$56.07
—
$481.95
On Sale
Holley EFI Systems Wiring Harnesses
Holley offers a variety of direct replacement EFI wiring harnesses, including multi-port, sequential, and throttle body injection styles. These units are made with premium components to ensure better reliability and performance for your ride--and they're compatible with many engine swaps. Holley EFI systems wiring harnesses are sold individually or as a kit; choose the model needed for your fuel injection application.
( 32 )
$649.95
—
$972.95
$583.95
—
$874.95
On Sale
Flowmaster 50 Series Delta Flow Mufflers
Flowmaster 50 Series Delta Flow mufflers are designed to produce a mellow, deep sound. They're milder on the outside of the vehicle than the 40 Series mufflers and are significantly quieter on the inside. These mufflers combine the increased horsepower and torque you've come to expect from Delta Flow technology with the performance sound and feel that makes Flowmaster famous.
( 370 )
$173.95
—
$188.95
$156.55
—
$170.05
On Sale
B&M Jeep Precision Sport Shifters
B&M Racing introduces the Precision SportShifter for 2007-18 Jeep Wrangler JK models equipped with the NSG370 6-speed manual transmission. The unit features a CNC billet aluminum case with an electric blue anodized finish which houses internal components made from super tough 4140 chromoly. The shift throw has been reduced by 35 percent over the factory shifter along with the detent pressure which has been significantly increased creating a noticeably stiffer shift feel. This was done to address problems with the softness of the factory shifter detent springs which easily pop out of gear while off-roading. The shifter uses the factory shift stick and knob.
( 12 )
$767.95
$690.95
On Sale
Summit Racing™ Heavy-Duty LS Truck Motor Mount Kits
Summit Racing™ heavy-duty LS truck motor mount kits are a bolt-in upgrade to replace factory fluid filled mounts on select 2007-14 GMC and Chevrolet truck models. These mounts are constructed from powdercoated heavy-gauge steel and have a urethane insulator to limit engine vibration. The bolt together design can withstand all the abuse you can throw at your truck. Eliminate and replace weak factory motor mounts that are prone to breaking with Summit Racing™ heavy-duty LS truck motor mount kits.
( 16 )
$359.99
$323.99
