Availability
Showing In Stock Items. Show All 175 Items.
Intended for high-horsepower street fans, the McLeod RST Street Twin clutch kits are economically priced twin disc clutches that use your existing flywheel. Able to handle up to 800 hp, the RST Street Twin clutches remain completely street-drivable. The organic lined clutch discs provide smooth engagement with a soft pedal effort, making these clutch kits ideal for the street performance enthusiast. (For select vehicles where these clutches are not adaptable to your existing flywheel, a new flywheel is included in the kit.) Here are some additional features of the McLeod RST Street Twin clutch kits: * Alignment tool included * Lighter-than-stock pedal feel * Will bolt to factory flywheel * CNC-machined and anodized flywheel adapter ring * Organic disc facing for smooth and even clutch engagement with excellent release qualities * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 83 )
$815.00
—
$999.00
TCI EZ-TCU automatic transmission controllers are fully configured right out of the box--no tuning is necessary. Simply install them with the included instructions and then start the systems by answering the simple setup wizard questions on the included hand-held unit. They're capable of real-time switchable calibrations, which allows for multiple setups. The multi-shift settings include a full manual mode for using bump or paddle shifters. The TCI EZ-TCU automatic transmission controllers allow for maximum electronic control over shift points, shift firmness, and shift speed. Self-diagnostics enable users of every skill level to fully utilize their capabilities. Be sure to match your particular transmission with the correct EZ-TCU controller, as some models are designed for pre-2009 applications ... and other models are for 2009 and later.
( 37 )
$1,025.95
An increasing number of vehicle manufacturers are using double clutch transmission technology, enabling comfortable gear changes without interruption of traction power, while at the same time reducing fuel consumption and CO2 emissions. Like almost every clutch, the double clutch can also wear out. However, replacement is not possible without special tools. This is because the double clutch is firmly meshed in the gearbox bell and must be removed together with the gearbox. LuK RepSet 2CT clutch kits offer a unique repair solution for dry and wet double clutches. With a LuK kit and the corresponding special tool, repair shops can repair double clutches quickly and professionally. Besides the double clutch, LuK RepSet 2CT kits contain all the precisely matched components in OEM quality which are necessary for the replacement of the respective double clutch system. These include guide sleeves, retaining rings, fixing screws and lever actuators, or engagement levers and engagement bearings. Features to note: * For dry and wet double clutches * Includes all parts needed for the repair * OE quality and perfectly coordinated * Safe mounting due to simple installation instructions * High-quality special tool for the perfect repair
( 14 )
$799.99
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 493 )
$734.99
—
$987.99
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 103 )
$1,399.95
$769.95
—
$1,099.95
McLeod RXT Street Twin clutch kits are ideal for the extreme horsepower enthusiast who wants performance and economy. Capable of handling up to 1,000 hp, the RXT Street Twin clutches are for those who've kicked it up another notch—but still require streetability. The ceramic facing on the clutch discs provides slightly aggressive engagement with a soft pedal effort, making these clutches suitable for most street performance enthusiasts. Match your vehicle specs to the correct model from McLeod. Additional features include: * Alignment tool * Lighter-than-stock pedal feel * Available with dedicated flywheel or adapter ring for factory flywheel * CNC-machined and anodized flywheel adapter ring * Smooth engagement with excellent release qualities * Ceramic facings on disc increase holding power over similar organic linings * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 46 )
$975.00
—
$995.00
ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.
( 87 )
$770.00
—
$1,113.00
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 80 )
$799.95
—
$1,049.95
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 372 )
$814.99
—
$1,040.99
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 303 )
$881.95
—
$1,217.95
Big torque doesn't have to mean big traction problems. Eaton Posi Performance differentials combine carbon friction discs with precision-forged gears to give you great traction, even under higher torque loads. Plus, the carbon friction discs produce smooth, quiet performance for the life of your vehicle.
( 104 )
$911.99
—
$947.99
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$777.95
—
$999.95
Ford Performance Parts 2007-12 Mustang GT500 one-piece driveshafts deliver peak endurance and optimum strength for increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 51.653 in. (1,312 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Off-road use only
( 1 )
$854.99
South Bend Clutch Dyna Max organic feramic clutch kits are manufactured with performance organic and feramic friction materials, which provide moderate clutch engagement. The Dyna Max organic clutch feramic kits by South Bend Clutch are durable and reliable. They come with the necessary parts you need to do the job—and many kits include Kevlar® pilot bushings. These kits are available for a variety of clutch styles and applications, with or without the flywheels. Select the kit best suited for your application needs.
( 22 )
$870.41
RAM HDX clutch kits are ideal for vehicles that will see mild street and occasional track use. These performance minded clutch kits will provide more clamping pressure over a stock unit and can handle power levels up to 450 hp. All HDX kits feature an increased clamp load pressure plate while providing smooth clutch engagement with only a slight increase in pedal effort. The HDX clutch disc features RAM's premium organic facing material for optimum performance. Most RAM clutch discs utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 63 )
$799.00
Summit Racing™ Positraction differential carriers deliver aggressive, yet smooth, controllable traction. Our carriers feature nodular iron cases, forged steel internals, strong teeth—and they're fully rebuildable. We offer fitments for dozens of axle models. Whether replacing or upgrading, Summit Racing™ Positraction differential carriers will put power to the pavement, providing the confidence and performance you need.
( 49 )
$821.99
—
$904.99
Built to exceed your expectations, Auburn Gear provides a variety of Grip-N-Loc differentials to match most makes and models. They build upon exclusive technologies previously found in their limited slip line—but with more robust construction and materials to satisfy the extreme demands of serious drivers. If you push the limits of performance and traction, perhaps through competition, or simply through extreme weather driving, Auburn Gear Grip-N-Loc differentials offer the best options to fit your application! More product features include: * Upgrades your vehicle for the safe transfer of increased power/torque across the axle * Case material is up to 50 percent stronger than OE cases * Advanced cone clutch technology provides a 25 percent increase in bias ratio/increased traction * Hardened-steel gear materials for confidence in extreme conditions * 2-year warranty
( 19 )
$794.99
—
$1,002.99
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 317 )
$750.99
—
$1,046.99
Yukon Gear & Axle ring and pinion sets are strong but quiet performers. Designed to handle some of the harshest conditions, these sets utilize the latest design and manufacturing technologies to afford you a smooth running gear that's durable and easy to set up. Yukon ring and pinions are available in hundreds of size, ratio, and axle model options. Whether you're on the street, off-road, or at the track, you'll experience unrivaled power and gear performance. Order the model recommended for your application.
( 172 )
$831.99
—
$1,008.99
RAM Powergrip HD clutch kits are the ultimate kit for extreme street and track performance. This race inspired clutch kit will provide more clamping pressure over a stock unit and can handle power levels up to 650 hp. All Powergrip HD kits feature an increased clamp load pressure plate, providing crisp clutch engagement with only a slight increase in pedal effort. The Powergrip HD clutch disc features RAM's premium 900 series metallic facing material on both sides. This allows the Powergrip HD unit to deliver maximum grip in an extreme high-horsepower street or racetrack application. These RAM Powergrip discs also utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 23 )
$799.00
—
$869.00
TCI trans-brake kits allow you to achieve maximum torque converter stall for quicker and more consistent reaction and 60 ft. times. They work like this: When the trans-brake is engaged, the vehicle can roll neither forward nor backward, and as you press on the accelerator, the engine can rev as high as the torque converter stall. Once the brake is released, power is immediately transferred to the rear tires, with less parts breakage than with a manual transmission.
( 21 )
$854.95
RAM Powergrip clutch kits offer your vehicle the perfect blend of drivability and performance. This dual-purpose clutch kit will provide more clamping pressure over a stock unit and can handle power levels up to 550 hp. All Powergrip kits feature an increased clamp load pressure plate, providing crisp clutch engagement with only a slight increase in pedal effort. The Powergrip clutch disc features a combination dual-sided disc with RAM's premium organic facing material on one side and RAM's premium 900 series metallic facing material on the other side. This allows the Powergrip unit to deliver optimum street/strip performance. The RAM Powergrip discs also utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 52 )
$799.00
ICT Billet bellhousing adapter plate kits assist with connecting a Nissan transmission onto a GM LS engine with minimal modification. Available in two kits, each one is compatible with Nissan 350Z/G35 6-speed transmissions and use all standard F-Body LS T56 flywheel, pressure plate, and bellhousing components. Plates are made from aerospace-grade billet aluminum and will take the place of the front bearing cover on the transmission. ICT Billet bellhousing adapter plate kits allow transmission and clutch servicing without removing the engine in most applications, and each kit includes the bellhousing adapter plate, pilot bushing, clutch disk, alignment tool, and mounting hardware. Choose the kit designed for your generation transmission. Notes: * Standard T56 bellhousing will bolt to adapter plate * Modification to transmission entails cutting/removing OEM bellhousing and OEM front bearing cover from transmission to allow adapter plate installation * To verify transmission generation, measure input shaft bearing OUTSIDE DIAMETER: -- Generation 1 = 3.937 or 100mm -- Generation 2 = 3.543 or 90mm * Installer must verify bellhousing/adapter plate alignment is within .005 in. during installation to prevent bearing side-loading; offset dowels may be necessary to ensure proper alignment.
Not Yet Reviewed
$899.99
Manufacturer Rebate
RAM Concept 10.5 dual-disc organic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 750. RAM Concept 10.5 dual-disc organic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit
( 5 )
$939.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
