2012 FORD F-150 - In Stock Filter Options - Vendor In Stock Filter Options Parts & Accessories

Ford Performance Parts 5.0L Crate Engine Control Packs

Ford Performance Parts Coyote 5.0L crate engine control packs are designed to properly wire Ford Performance Parts 5.0L modular crate engines. They include a specially-calibrated PCM, an electronic throttle control accelerator pedal, an air intake assembly, an MAF sensor, and all necessary wiring and harness adapters. You can eliminate the complexity of wiring modular 5.0L crate engines with one of these Ford Performance Parts engine control packs. Additional technical information: * Control pack M-6017-504V available for 2015-16 5.0L 4V Coyote engines, M-6007-M50A and M-6007-A50NAA 5.0L 4V Ti-VCT crate engines with manual transmission; M-6007-A50SCA and truck engines require modifications * Control pack M-6017-A504VA available for 2011-14 5.0L 4V Coyote engines, M-6007-M50 and M-6007-A50NA 5.0L 4V Coyote crate engines with manual transmission (adds wiring for Speed Dial M-4209ADPT-AC to pick up transmission output speed); M-6007-A50SC, M-6007-A50XS, Boss 302 and truck engines require modifications * Supercharged engines, M-6007-A50SC, M-6007-A50SCA, M-6007-A50XS, Boss 302 and truck engines require custom calibration * Electronic throttle control accelerator pedal eliminates throttle cable routing problems * Unique controls pack harness replaces stock body harness and is designed for street rod installation * Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses and HEGO sensors * PCM (remanufactured) with Ford Performance calibration requires return-type fuel system, will not work with returnless fuel system * Installation of this PCM in a 2011-16 Mustang GT will result in a no-start condition * Not for use with a 2015-16 F150 engines

3.67 out of 5 stars ( 3 )

$2,149.99

Injector Dynamics ID1750x Fuel Injectors

The best just got better! Injector Dynamics ID1750x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1700 and X Series, these fuel injectors are a drastic improvement over previous series from Injector Dynamics. Compared to the 1700, the 1750x offers: higher dynamic flow rate with no increase in minimum fuel mass, better cylinder to cylinder balance at low pulse widths, and improved pressure sensitivity—all while retaining the same "compatible with everything but dirt" corrosion resistance that made the ID1700 famous. Plus, a unique magnetic circuit, resulting from a lengthy development program, makes the ID1750x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. Order the set of fuel injectors recommended for your vehicle. Key features and benefits include: * Compact body design allows fitment in a variety of applications * Higher dynamic flow rate with no decrease in minimum fuel mass * Better cylinder to cylinder balance at low pulse widths * Improved pressure sensitivity * Corrosion resistance makes these fuel injectors compatible with Methanol/Ethanol/MTBE/Nitromethane and all known Hydrocarbon fuels * Unique magnetic circuit makes the ID1750x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors * Narrow spray pattern—minimal wall wetting promotes quick response and smooth running * Does not require extended linearity at low flow rates

Not Yet Reviewed

$2,478.00

Dee Zee Combo Transfer Tanks

Dee Zee combo transfer tanks offer room for liquid, room for gear—and plenty of extra room in your truck bed! These units combine a handy utility chest, together with a liquid transfer tank, so they take up less of your much-needed truck bed space. The tanks feature a radius curve design that eliminates key weld pressure points; they include a cap, a coupler for venting, and three stability baffles to prevent sloshing and dangerous weight transfer. Dee Zee utility chests have lockable stainless steel paddle handles. Combos are available in Brite-Tread aluminum, with or without an UltraBlack powdercoat finish; or in heavy-duty steel with a textured white or black powdercoat finish designed for corrosion protection. Choose the size and tank capacity tailored for your make/model—then conserve space while transporting everything you need with Dee Zee combo transfer tanks.

Not Yet Reviewed

$2,132.99

BD Diesel Screamer Turbochargers

BD Diesel Screamer turbochargers may offer a stock drop-in installation and appearance, but they are anything but stock! They feature a larger ballistic billet compressor wheel and BD's exclusive turbine profile that results in reduced backpressure and increased turbine flow compared to the competition. You get more potential maximum power output, right up to 690 hp with performance modifications. Each turbocharger is high-speed balanced with the actuator stroke tested prior to shipping.

3.0 out of 5 stars ( 2 )

$2,081.95

COMP Cams XFI NSR Ford 5.0 Modular 4V Camshafts

COMP Cams XFI NSR Ford 5.0 Modular 4V camshafts unlock a major power upgrade for the 2011+ Ford 5.0L engine. Specifically designed for Coyote V8 applications, these camshafts are counterbalanced and work with phaser limiters to produce optimum, safe power. By taking cutting-edge race technology and applying it to street applications, COMP Cams has engineered these phaser-friendly cams with an exclusive, integrated counterbalance design that ensures a smoother operating valvetrain. They are available for both naturally aspirated and supercharged engines, with three stages available in each series. All cams are "no springs required." Optimized race and street profiles give you power where you need it the most, whether that's maximized midrange power and torque or increased top-end horsepower. Drive with COMP Cams XFI NSR Ford 5.0 Modular 4V camshafts and drive with sophisticated power!

Not Yet Reviewed

$2,013.95

VEGE Remanufactured Automatic Transmissions

VEGE Remanufactured automatic transmissions enable you to get back on the road quickly—without breaking the bank! With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured automatic transmissions with a level of quality that equals that of new OEM products at extremely competitive prices. The parts are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Thousands of models are available, with aluminum case, torque converter included, and gear options from one through eight. Includes fluid. Get your vehicle shifting into gear with a reman auto-trans from VEGE.

4.5 out of 5 stars ( 8 )

$4,100.99

Cloyes Engine Timing Sets

Cloyes engine timing sets meet OE performance requirements. They utilize the latest in design and materials so you can enjoy quiet, maintenance-free performance. These sets are available in various timing chain styles, such as link belt, single roller, and single non-roller. The gears are made from high alloy steel, and heat treated for durability; while the chain is pre-stressed, and heat treated for longevity. Order the timing set designed for your specific model application.

4.14 out of 5 stars ( 7 )

$3,179.99

Injector Dynamics ID2600x Fuel Injectors

Injector Dynamics ID2600x fuel injectors are developed specifically for use with liquid fuels, featuring corrosion-resistant internals, and long-term compatibility with ethanol and methanol. ID2600-XDS fuel injectors have the highest flow rate of any injectors offered by Bosch and flows 50 percent more than the ID1700x units. Injector Dynamics ID2600x fuel injectors feature Dual Slope Matching, a method of matching the flow rate in both the linear and nonlinear operating range, to provide better cylinder-to-cylinder consistency at low pulse widths.

Not Yet Reviewed

$2,940.00

Stainless Works Performance Headers

Gain powerful sound, better performance, and improved mileage with a set of Stainless Works performance headers. Constructed from high-quality 304L stainless steel, the headers are CNC mandrel-bent and have durable 3/8 in. thick flanges. They're available to fit the factory connection point, or attach to a custom Stainless Works cat-back exhaust. Order the style you prefer and the model designed for your year/make and engine application.

4.5 out of 5 stars ( 30 )

$2,422.50

—

$2,612.50

Westin HDX Heavy-Duty Grille Guards

Toughen up your vehicle while adding a sporty look. Westin HDX heavy-duty grille guards provide your truck with maximum protection and eye-catching style. They feature a full-metal mesh punch plate grille, heavy-duty rubber strips to keep from scuffing up your body panels, and one-piece welded uprights for additional support. Some models also include headlight guards. These units are available in steel or stainless steel—with a variety of finish options. All Westin HDX heavy-duty grille guards are custom-designed for proper vehicle fitment.

4.38 out of 5 stars ( 13 )

$2,006.99

On Sale

ADS Billet Control Arms

ADS offers billet control arms for a variety of front and rear Ford Bronco applications from 2021 and up. These cutting-edge arms are CNC-machined from 6061 billet aluminum, designed to correct camber and caster for a smoother ride even in the toughest terrains. The steel or polyurethane/steel bushings reduce deflection, ensuring stability and handling. ADS control arms feature a sleek, black anodized finish to resist corrosion—and they're fully rebuildable for long-lasting performance. Grade 8 hardware is included for ease of installation.

Not Yet Reviewed

$2,561.95

MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converters

MagnaFlow California Grade CARB Compliant direct-fit catalytic converters comply with California Air Resources Board (CARB) emissions regulations, which require more precious metals and rigorous testing, plus the direct-fit means an easier bolt-on install for you. Choose the perfect fit for your vehicle. Features include: * Stainless steel construction * CNC-precision robotic manufacturing * Limited 5-year/50,000 mile warranty

2.67 out of 5 stars ( 3 )

$2,054.00

—

$2,286.00

MaxTrac Suspension Lift Kits

MaxTrac Suspension lift kits allow your truck/SUV to tackle all-terrain conditions with a simple set that's easy to put together. Experience a considerable variety of lift heights, and return to stock height later if desired. These coil spacer components are easy to use and extremely efficient, allowing your ride to get spruced up before hitting the road. Whether aiming to enhance your vehicle's menacing look or heading off-road, rely on MaxTrac to deliver nothing but the best with high-end, quality parts that'll weather all conditions. Order the set designed to fit your specific model.

4.86 out of 5 stars ( 7 )

$3,002.82

Icon Vehicle Dynamics 2.5 RR Coilover Kits

Icon Vehicle Dynamics 2.5 RR coilover kits will dramatically increase the capabilities of your vehicle's front suspension, while providing the heat dissipation and long-lasting performance of a full-blown race shock. Plus, they are designed to bolt-on and install with ease! These VS (Vehicle-Specific) coilovers feature 2.5 in. bodies with corrosion-resistant plating, external reservoirs to ensure maximum cooling, and are fully serviceable, so they can be rebuilt and/or revalved to offer an immeasurable service life. Icon Vehicle Dynamics 2.5 RR coilover kits come complete with all the hardware necessary to complete the installation as well as a sway bar relocation bracket kit to adjust the location of the sway bar to clear the larger shock.

Not Yet Reviewed

$2,345.88

Icon Vehicle Dynamics 3.0 Zeta RR Secondary Shocks

For high performance Ford Raptor suspension components, ICON Vehicle Dynamics is an industry leader. With their 3.0 coilovers and bypasses, billet aluminum upper control arms, and bolt-on rear bump stop system, drivers of ICON-equipped Ford Raptors are able to push their vehicles to a whole new level. It's this level of off-road abuse that prompted ICON to develop a 3.0 Secondary Bypass shock engineered to work perfectly with the Camburg Performance Dual Shock Lower Control Arm kit. The addition of this 3.0 Secondary Bypass means rougher terrain and larger off-road obstacles can be overcome with speed and confidence. With the turn of a knob, the compression and rebound damping of these shocks can be tuned to perfectly complement the rest of ICON's Raptor suspension products for an unparalleled level of on and off-road performance. The ICON Ford SVT Raptor Secondary front shocks are a 3-tube external bypass shock with remote reservoir. These are far from the norm when compared to a traditional bypass shock you see on trophy trucks and other off-road race vehicles. Each bypass valve has a specific port design and is individually equipped with a different spring rate to ensure proper performance at each zone of shock travel. These same bypass valves feature damped valve seats for quiet and precise operation. That means no clicking noises as you hit bumps or road chatter driving down the road. The biggest difference in these shocks versus an industry standard bypass shock is the "Easy-to-Adjust" knobs and the replaceable bypass tubes. The "Easy to Adjust" hi-resolution clicker knobs do not require any tools for adjustment, and can be adjusted in seconds for the demand of the terrain you'll be facing. Another unique feature of this shock is the replaceable bypass tubes that can be swapped out during a standard rebuild if any damage were to occur, where a normal bypass shock body would need to be completely replaced, saving you hundreds of dollars. Features and benefits of Icon Vehicle Dynamics 3.0 Zeta RR Secondary Shocks: * Further increases front damping ability of the Raptor in off-road conditions * East-to-adjust bypass knobs allow for quick changes to shock without the use of tools * Hydraulically damped bypass valve seats are engineered to attenuate the loud bypass clicking noise transferred to the cab that is common with other brands * High resolution bypass valves designed for noticeable fine-tuning of rebound and compression damping * Digressive rebound on main piston in conjunction with calibrated external rebound valve preload facilitates good low-speed characteristics. This is in contrast to most bypass shocks that are designed primarily for high-speed use only * Compact bypass tube design allows ICON to fit 3 bypass tubes where others could only fit 2, allowing for more adjustability of the shock * Compact tube block design keeps bypass tubes close to the body, providing maximum clearance from tires and other suspension components * Replaceable bypass tubes can easily slide into position in case of damage * Multi-stage cad plated finish with polished and anodized top cap / rod ends

Not Yet Reviewed

$3,684.15

Access LoMax Stance Hard Covers

Access LoMax Stance hard tonneau covers are raising travel standards. They enable you to conveniently transport large cargo by placing the cover in the vertical position for full bed usage—or keep it closed for better gas mileage. Black urethane painted aluminum panels, waterproof seals, and durable hinges protect your gear from rain and dust. Standout style and quality craftsmanship set the LoMax Stance hard covers apart. Installation is easy to do by yourself; no need for complicated tools or equipment. Rooftop anchors and powdercoated steel pivot links with rubber bushings reduce noise and prevent the covers from contacting the rear window when stored vertically behind the cab. Dozens of models are available for specific vehicle applications.

5.0 out of 5 stars ( 1 )

$2,367.25

—

$2,550.00

Access LoMax Folding Hard Covers

You asked, and they folded. Access LoMax folding hard tonneau covers are engineered with performance in mind and designed with an impeccable fit that makes a powerful impression. Each LoMax cover features a sleek, low-profile combined with maximum security for your truck box, and is sure to exceed your expectations. They are built with premium materials, state-of-the-art technology, and the highest caliber of workmanship. Seamless style, water-shedding design, easy installation and removal; Access calls them LoMax, you will call them your next choice for premium hard tonneau covers.

5.0 out of 5 stars ( 1 )

$2,227.85

—

$2,470.95

Baer Brakes Baer Claw Extreme+ Disc Brake Systems

Baer Brakes Baer Claw Extreme+ disc brake systems are Baer's flagship offerings, featuring their forged Monoblock calipers mounted to 2-piece rotors. The Extreme+ systems employ current state-of-the-art race technology usually only found in very expensive race calipers. Baer now brings that technology to the road-going market. The 6S line of calipers represent Baer's most aggressive road offering and are suitable for virtually any level of track use. Optional R-Spec 6R calipers are a race version of 6S calipers; available for any Extreme+ system. The R-Spec calipers feature additional machining to the 6S calipers to save close to 2 lbs. per caliper and allow for top-loaded pads. Over 400 models are available for specific vehicle, bolt pattern, and axle applications. Features include: * MonoBlock calipers machined from a single piece of 2618 forged aluminum * The only 6-piston, forged, mono-block calipers offered to the road-going/street market * Stainless steel pistons, abutments, and noise-suppression springs * Staggered piston sizes to minimize pad wear * Uses the common D1247 (DR11) race pad backing plate, shared by many competition calipers * Dual seals (dust/weather and pressure) to meet D.O.T specifications * Caliper can accept 13.5 in. to 16 in. rotors * Machined, hand-painted logos * Available in a variety of powdercoat finishes * Uses correct banjo-style fittings; Baer does not use any pipe thread * Available for front or rear * Offers the exact same look front and rear—the only brake manufacturer that offers this! * Rear systems incorporate a drum-in-hat parking brake * Rear systems for C-clip axles include Baer's Verislide self-centering brackets * Systems include everything needed for each corner, including hoses and fittings (except for general fit applications)

3.0 out of 5 stars ( 1 )

$3,699.95

—

$4,199.95

aFe Control Sway-A-Way Bypass Shocks

aFe Control Sway-A-Way bypass shocks offer superior, externally adjustable, position-sensitive damping for extreme off-road performance while maintaining on-road comfort. They feature robust CNC-machined components, large diameters for heat dissipation, and durable materials. These position-sensitive bypass shocks typically have two compression tubes and one rebound tube, which allows you to tune both compression and rebound to better suit various terrains without sacrificing ride quality. Key features and benefits: * They feature red anodized CNC machined aluminum components and nickel flashed, zinc plated, and clear coated steel cylinder bodies for exceptional corrosion resistance * Externally adjustable bypass technology * Multi-Seal carrier to ensure zero leakage * Nitrobrite polished steel shafts provide longer seal life and are harder than standard chrome shafts * Specifically formulated (7wt), full synthetic shock oil * Available with piggyback reservoirs for easy mounting, or remote reservoirs when space is limited

Not Yet Reviewed

$3,109.00

On Sale

ADS Direct-Fit Race Coilover Shocks

ADS offers direct-fit race coilover shocks for a variety of applications. They're available in non-adjustable or single-adjustable (with 20 valving selections) models. These coilovers were born from years of desert racing experience. Performance, reliability and longevity were the primary concerns when they were in development. Each part has a purpose, from the screw- in end cap reservoirs to the captive lower spring perch. Extended threaded bodies allow for larger range of adjustment on dual rate spring setups. Heavy-duty adjustment collars prevent thread skipping when adjusting preload or crossover engagement. Truncated threads prevent dirt and debris from jamming into hardware.

Not Yet Reviewed

$3,268.95

—

$3,514.95

ADS Direct-Fit Race Shocks

ADS offers direct-fit race shocks for a variety of applications, including many Ford, Ram, Jeep, Toyota, and Dodge trucks from 2000 and up. These suspension upgrades are designed to take your off-road performance to the next level. The top-of-the-line shocks are engineered to provide maximum stability and control, allowing you to conquer even the toughest terrains with ease. Crafted from high-grade materials, ADS Racing shocks are built to withstand extreme conditions and heavy use. The advanced damping technology ensures a smooth ride, minimizing shock and vibration for maximum comfort. Installation is a breeze, with a bolt-on design that fits seamlessly onto your existing suspension system. Whether you're a seasoned off-road enthusiast or just starting out, ADS Racing shocks are the perfect choice for enhancing your vehicle's performance and handling. Sold in pairs, order the configuration and size options recommended for your ride.

Not Yet Reviewed

$2,766.95

aFe Control Sway-A-Way Coilover Shocks

The aFe Control Sway-A-Way coilover shocks are designed with race-winning technology, offering better damping curves for rough terrain but maintain comfort and control on the street. The coilover shocks feature zinc plated and steel cylinder bodies with clearcoat for exceptional corrosion resistance. They also feature specifically formulated, fully synthetic shock oil and a multi-seal carrier to ensure zero leakage. A special truncated thread design allows for removal of the included coilover hardware without having to completely disassemble the entire shock. Upgrade your daily driver with aFe Control Sway-A-Way coilover shocks. They offer high-performance suspension features from the off-road racing world for a significant upgrade in capability and style. Select the Sway-A-Way coilover shocks designed for your application needs. Key benefits and features: * 20-plus years of research/development and testing in nearly all vehicle types * High-quality construction—uses CNC-machined aluminum components and multi-seal carriers for zero leakage, built to strict tolerances * Superior durability—the coilover shocks have features like bright zinc-plated steel bodies to resist corrosion, while 7/8-inch polished Nitro Steel shafts handle impacts, ensuring longevity * Red anodized, CNC-machined aluminum components are made to the strictest tolerances * Consistent performance—synthetic shock oil and remote reservoirs (on some models) increase fluid capacity, reducing heat and preventing shock fade during hard use * Engineered as a direct replacement for specific vehicles, requiring no cutting, drilling, or permanent modifications

Not Yet Reviewed

$3,109.00

Rough Country Vertex Suspension Lift Kits

Rough Country offers Vertex suspension lift kits for hundreds of trucks from the early 2000s and up—including models from Chevrolet, GMC, RAM, Ford, Jeep, and Toyota. Depending on the application, these kits enable you to raise the front and/or rear of your vehicle from 2 to 7.5 in. This is accomplished via component options such as steering knuckles, strut kits, coil springs, leaf spring blocks, spacers, torsion bar keys, and coilovers. Each kit features Vertex adjustable front and rear shocks for incredible ride quality on- and off-road. Suspension lift kits provide many benefits, including an aggressive stance, factory-like geometry, increased ground clearance, and plenty of ride height to accommodate larger tires. Installation varies from kit to kit. Hardware is included. Order the package recommended for your truck—and enjoy premium lifted performance and aesthetics.

Not Yet Reviewed

$3,249.95

Rough Country Vertex/V2 Suspension Lift Kits

Rough Country Vertex coilover/V2 shocks suspension kits lift and level your vehicle, giving it some serious attitude, a smooth ride, and unmatched highway and trail performance. The kits contain different components matched to your vehicle application, but they all offer increased ground clearance and feature V2 monotube shocks and Vertex coilovers. Choose the kit designed for your vehicle. Vertex/V2 features: * V2 monotube shocks: -- Monotube design -- Internal floating piston -- Nitrogen-charged -- 46mm high-flow piston -- Fast heat dissipation -- 36kN tensile strength -- Mounts inverted -- 6061 T-6 brushed aluminum body -- 3-year Manufacturer's Warranty * Vertex coilovers: -- 8-stage adjustable damping -- Monotube design -- Nitrogen-charged -- Massive 2.5 in. piston -- 22mm chrome-hardened piston rod -- 3-Stage Seal System -- Heat-treated alloy bearing -- Honed steel body -- 3-year Manufacturer's Warranty

Not Yet Reviewed

$2,609.95

2012 FORD F-150 Parts and Accessories