2012 CHEVROLET | Summit Racing

Holley Mid-Mount Complete Accessory Systems

Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.

4.62 out of 5 stars ( 108 )

$2,202.95

—

$4,560.95

Holley Terminator X MAX Engine Management Systems

Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions

4.18 out of 5 stars ( 92 )

$2,049.95

—

$2,559.95

Summit Racing™ Pro LS 6.0L Rotating Assemblies

Summit Racing™ Pro LS 6.0L forged rotating assemblies provide industry-leading fit, finish, and durability at an affordable price. These kits are tested to over 1,200 hp in turbo applications. They're available in a wide range of fitment and performance options. Standard features and specs may include: * 4340 forged steel crank * Core hardened to optimum strength, tempered, and nitride hardened * Lightening rod journals, gun-drilled mains, and profiled counterweights for better engine acceleration * Maximum journal tolerances of +/- .0001 to ensure consistent bearing clearance * Straight-shot oiling for maximum oil film strength at the maximum load angle * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control * Premium main and rod bearings * Clevite H-bearings are designed for high-rpm operation in racing applications * Tri-metal bearings designed with high bearing crush for maximum retention * Medium eccentricity shells with precision wall tolerance of +/- .00015 in.

5.0 out of 5 stars ( 8 )

$2,608.87

—

$2,960.87

ACDelco GM Genuine Parts Superchargers

ACDelco GM Genuine Parts superchargers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Make the right choice for your GM vehicle; choose ACDelco GM Genuine Parts superchargers.

Not Yet Reviewed

$2,246.99

Fleece Performance LML CP3 Conversion Kits

Why convert your LML's fuel system from a CP4 to a CP3? Since its introduction, the CP4 has proven to be less reliable and less capable than the CP3 used in previous Duramax platforms—resulting in costly repairs for owners when a CP4 fails. You can improve your LML Duramax's reliability and fueling capability, as well as avoid costly failure with Fleece Performance LML CP3 conversion kits. They provide OEM fit-and-finish features, like Fleece's exclusive molded hoses for the fuel feed and return, high flow CP3 fuel fittings, and their valley feed line to support aftermarket lift pump applications. Fleece Performance LML CP3 conversion kits are offered with or without pump and the pump kits come in two different style pumps—a Bosch CP3 injection pump or Bosch CP3 pump with heavy-duty 10mm cam. Choose the kit that is right for you. All kits include: * CP3 to rail high pressure fuel line * High-flow CP3 feed and return fuel fittings * Preformed fuel feed and return fuel hoses * CP3 mounting adapter * Dosing injector distribution block, feed and return lines * FCA extension harness * Low pressure fuel feed line * Hardware kit

5.0 out of 5 stars ( 1 )

$2,095.00

—

$2,749.00

Ridetech Ridepro E5 Air Ride Suspension Control Airpod Dual Compressor Systems

Ridetech Ridepro E5 Air Ride Suspension Control Airpod dual compressor systems are pre-wired solutions that mount in your vehicle as a single unit and adjust vehicle height at the push of a button while maintaining balanced air springs. With sophisticated pressure and height algorithms, Ridepro E5 control systems tune air ride suspension for proper handling and world-class ride quality, so that each time your turn the ignition key, Ridepro E5 self-adjusts to ride height and compensates for changes in load. And adjusting vehicle height is as simple as choosing one of three presets. You can also control the system wirelessly by simply connecting a compatible smartphone via Bluetooth and using the Ridepro E5 app. Ridetech Ridepro E5 Airpod systems feature and include: * Full color TFT LCD. 3.5 in. display with multi-touch capacitive touchscreen * 4-button silicone keypad with backlit symbols for quick vehicle height changes * "Ride Height On Start" automatic lift and level feature * Display and setup via control panel, smartphone app or laptop * Weatherproof ECM and heavy-duty connectors * Automatic weight compensation (with optional height sensors) * Bluetooth connectivity to most smartphones for wireless control * Aluminum Airpod 5-gallon tank * Ridepro E5 digital control * Dual compressors * 1/4 in. valves * Perfect for vehicles over 3,500 lbs.

1.0 out of 5 stars ( 1 )

$2,865.00

Injector Dynamics ID1750x Fuel Injectors

The best just got better! Injector Dynamics ID1750x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1700 and X Series, these fuel injectors are a drastic improvement over previous series from Injector Dynamics. Compared to the 1700, the 1750x offers: higher dynamic flow rate with no increase in minimum fuel mass, better cylinder to cylinder balance at low pulse widths, and improved pressure sensitivity—all while retaining the same "compatible with everything but dirt" corrosion resistance that made the ID1700 famous. Plus, a unique magnetic circuit, resulting from a lengthy development program, makes the ID1750x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. Order the set of fuel injectors recommended for your vehicle. Key features and benefits include: * Compact body design allows fitment in a variety of applications * Higher dynamic flow rate with no decrease in minimum fuel mass * Better cylinder to cylinder balance at low pulse widths * Improved pressure sensitivity * Corrosion resistance makes these fuel injectors compatible with Methanol/Ethanol/MTBE/Nitromethane and all known Hydrocarbon fuels * Unique magnetic circuit makes the ID1750x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors * Narrow spray pattern—minimal wall wetting promotes quick response and smooth running * Does not require extended linearity at low flow rates

Not Yet Reviewed

$2,661.12

Summit Racing™ Automatic Transmissions

Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.

3.48 out of 5 stars ( 66 )

$4,039.99

Eddie Motorsports Raven Series LS Chevy S-Drive Serpentine Pulley Drive Systems

Eddie Motorsports Raven Series LS S-Drive serpentine pulley drive systems for Chevrolet LS engines are the latest advancement in engine accessory kits on the market. These drive system pulleys and brackets are CNC-machined from 6061 T-6 aluminum and include stainless steel fasteners, as well as other necessary accessories: water pumps, alternators, serpentine belts, A/C compressors, billet aluminum water outlet, and a SFI approved balancer. Change the efficiency of your engine with a single 6-rib serpentine belt to drive all of your accessories.

Not Yet Reviewed

$2,668.95

—

$3,658.95

Holley Dominator EFI Vehicle Management Systems

Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential

4.17 out of 5 stars ( 6 )

$3,149.95

—

$3,499.95

Callies Magnum Crankshafts

Race smart with Magnum durable competition crankshafts from Callies. Manufactured from ultra-pure AISI 4340 steel, these cranks are subjected to multiple heat treatments, giving them unsurpassed wear and strength characteristics. With their gundrilled mains and fully profiled counterweights, you may choose from an available selection for a variety of engine types. You just can't beat the proven reliability and value of Callies Magnum crankshafts.

5.0 out of 5 stars ( 2 )

$3,659.00

—

$3,721.00

Summit Racing™ Pro LS 5.3L Rotating Assemblies

Summit Racing™ Pro LS 5.3L forged rotating assemblies provide industry-leading fit, finish, and durability at an affordable price. These kits are tested to over 1,200 hp in turbo applications. They're available in a wide range of fitment and performance options. Standard features and specs may include: * 4340 forged steel crank * Core hardened to optimum strength, tempered, and nitride hardened * Lightening rod journals, gun-drilled mains, and profiled counterweights for better engine acceleration * Maximum journal tolerances of +/- .0001 to ensure consistent bearing clearance * Straight-shot oiling for maximum oil film strength at the maximum load angle * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control * Premium main and rod bearings * Clevite H-bearings are designed for high-rpm operation in racing applications * Tri-metal bearings designed with high bearing crush for maximum retention * Medium eccentricity shells with precision wall tolerance of +/- .00015 in.

Not Yet Reviewed

$2,608.87

—

$2,958.87

Injector Dynamics ID1300x Fuel Injectors

Injector Dynamics ID1300x fuel injectors are high-flow models with characteristics specific to the needs of motorsport tuners. You get superior flow without sacrificing idle and cruising performance in low fuel demand situations. This perfect balance between reliability and performance makes the 1300x Series one of the most popular options in today's motorsports. These injectors not only work with gasoline, but any ethanol fuels your engine is tuned for. The stainless internals prevent corrosion, add durability, and provide dependable flow in high performance engines. Order the ID1300x fuel injectors recommended for your vehicle.

4.0 out of 5 stars ( 1 )

$2,060.52

—

$2,079.00

Summit Racing™ Pro LS 5.7L Rotating Assemblies

Summit Racing™ Pro LS 5.7L forged rotating assemblies provide industry-leading fit, finish, and durability at an affordable price. These kits are tested to over 1,200 hp in turbo applications. They're available in a wide range of fitment and performance options. Standard features and specs may include: * 4340 forged steel crank * Core hardened to optimum strength, tempered, and nitride hardened * Lightening rod journals, gun-drilled mains, and profiled counterweights for better engine acceleration * Maximum journal tolerances of +/- .0001 to ensure consistent bearing clearance * Straight-shot oiling for maximum oil film strength at the maximum load angle * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control * Premium main and rod bearings * Clevite H-bearings are designed for high-rpm operation in racing applications * Tri-metal bearings designed with high bearing crush for maximum retention * Medium eccentricity shells with precision wall tolerance of +/- .00015 in.

4.25 out of 5 stars ( 4 )

$2,610.87

—

$2,960.87

Billet Specialties Tru Trac Serpentine Systems with A/C

Billet Specialties Tru Trac serpentine systems with A/C feature easy, straightforward assembly—with no spacers or washers to fool with. The entire Tru Trac systems are designed to mount to the engine block to allow for any cylinder head/intake configuration. All hardware and fasteners are included in each kit to complete the install. Tru Trac serpentine systems with A/C include: * Powermaster 170 amp 1-wire alternator * Billet aluminum alternator fan and pulley * Edelbrock water pump * Billet aluminum water pump pulley * Billet aluminum bridge bracket * Patent-pending billet aluminum tensioner engineered specifically for each Tru Trac serpentine system * Billet aluminum tensioner pulley * Billet aluminum crankshaft pulley * Polished ARP 12-point stainless steel fasteners * Goodyear Gatorback 6-rib serpentine belt * Comprehensive installation manual * Polished Sanden SD-7 A/C compressor * Polished billet aluminum A/C compressor clutch cover * Polished billet aluminum A/C compressor manifold

4.6 out of 5 stars ( 20 )

$2,706.95

—

$3,622.95

Summit Racing™ Pro LS 6.2L Rotating Assemblies

Summit Racing™ Pro LS 6.2L forged rotating assemblies provide industry-leading fit, finish, and durability at an affordable price. These kits are tested to over 1,200 hp in turbo applications. They're available in a wide range of fitment and performance options. Standard features and specs may include: * 4340 forged steel crank * Core hardened to optimum strength, tempered, and nitride hardened * Lightening rod journals, gun-drilled mains, and profiled counterweights for better engine acceleration * Maximum journal tolerances of +/- .0001 to ensure consistent bearing clearance * Straight-shot oiling for maximum oil film strength at the maximum load angle * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control * Premium main and rod bearings * Clevite H-bearings are designed for high-rpm operation in racing applications * Tri-metal bearings designed with high bearing crush for maximum retention * Medium eccentricity shells with precision wall tolerance of +/- .00015 in.

4.25 out of 5 stars ( 4 )

$2,583.87

—

$2,966.87

Wilwood TC6R Big Brake Truck Front Brake Kits

These Wilwood TC6R big brake front kits feature everything you need for maximum stopping power. They use a TC6R billet aluminum brake caliper, which generates unmatched clamping efficiency through six thick-walled stainless steel pistons. Those are matched to an advanced formula high-friction compound for quick response and extended fade resistance. These Wilwood TC6R big brake front kits are available with your choice of standard 16 in. directional-vane GT rotors or the high performance 16 in. cross-drilled, slotted, zinc-washed SRP rotors. Each rotor is mated to high-strength, forged aluminum hats that are rib-reinforced to carry extreme loads and are black anodized to prevent oxidation. Get your truck or SUV stopped quickly with one of these Wilwood TC6R big brake front kits.

4.55 out of 5 stars ( 20 )

$2,901.75

—

$3,092.33

Fleece Performance Cheetah FMW VNT Turbochargers

Fleece Performance offers Cheetah FMW VNT turbochargers for a variety of diesel trucks to enhance your driving experience. These drop-in replacements come with a Fleece-engineered 63mm FMW compressor wheel and high-flow Cheetah turbine wheel. You'll enjoy the spool-up and throttle response of a small turbo and still get the big top-end power you're looking for. Rated at up to 650 rear wheel horsepower (depending on model), this is the ultimate combination for dual-purpose applications. If you're towing during the week and sled pulling on the weekend, the 63mm FMW VNT Cheetah is just the ticket. Order the turbo model recommended for your vehicle. Additional details: * Stock appearing: Uses the stock housings with updated internals. This allows you to keep all factory systems intact, yet enables you to safely run 40 psi of boost. No aftermarket components or modifications needed for installation. * Proven Technology: Built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings. * Powerful Yet Responsive: Turbochargers spool like stock, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end. * Exclusive FMW wheel technology: – Forged milled wheels – Faster spool-up – Increased throttle response – Broader torque curve

5.0 out of 5 stars ( 2 )

$2,649.00

FiTech Ultimate LS EFI 500 HP Fuel Injection Systems

FiTech has some of the best-engineered and priced throttle body systems on the market. Their LS EFI 500HP fuel injection systems bring incredible ingenuity to the market. FiTech fabricated many aluminum parts for these systems, including the low-profile 92mm billet throttle body, high-volume billet fuel rails, and an intake manifold with 1,500 to 6,500 rpm powerband and 3mm construction. Sequential spark and fuel control mates 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touchscreen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. A suction cup mounting bracket puts the controllers at your fingertips and allows for impressive visual aids. The optional transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 GM transmissions. FiTech LS EFI 500HP fuel injection systems with transmission controller provide impressive power and performance, while allowing you to save a little green for your next tires. Additional features: * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touchscreen hand-held controller with data log features

3.21 out of 5 stars ( 42 )

$2,082.99

—

$2,694.99

Wilwood AERO6 Big Brake Front Brake Kits

Wilwood AERO6 Big Brake front brake kits enhance the performance and looks of your extreme vehicles. Show cars and dual-purpose street and track cars—as well as trucks for towing and off-road SUVs—will benefit from these kits. Wilwood Big Brake kits feature AERO6 forged calipers that deliver heavy-duty stopping power in your choice of powdercoated red or black. Premium-grade rotors, high performance pads, and precision-machined hats complete the list of these matched component kits. Order the model designed for fitment on your vehicle, then bolt on the optimum performance and looks of Wilwood AERO6 Big Brake kits.

4.5 out of 5 stars ( 20 )

$2,595.99

—

$3,181.80

FTI Performance TH400 Level 4.5 Transmissions

FTI Performance TH400 Level 4.5 transmissions begin with a race-prepped factory Chevy case—and end up rated up to 1,100 hp. Each professionally hand-built case includes a short shaft, a billet aluminum drum and forward clutch hub, a 34-element sprague, and race material clutches. An FTI billet aluminum trans-brake with a full manual reverse valve body is stout enough to handle major power and keeps reverse and first gears closely knit. The included deep aluminum pan allows more fluid capacity for increased cooling, while the 300M input shaft provides amazing strength. Whether you're racing off-road, on the street, or at the track, FTI Performance TH400 Level 4.5 transmissions fit the bill. Order the model best suited for your application.

Not Yet Reviewed

$3,649.00

Wilwood TX4R Big Brake Rear Brake Kits

Wilwood TX4R Big Brake rear brake kits provide the ultimate in braking performance for countless applications—including many Chevrolet, GMC, and Cadillac truck, SUV, and armored vehicles. Using TX6R radial mount 6-piston aluminum calipers and massive 15.50 in., one-piece, GTB alloy rotors, these bolt-on kits deliver consistent stopping power and extreme-duty durability under sustained high heat. The calipers are volume matched for compatibility with original equipment power brake system output. The kits include radial mount caliper brackets and all the necessary hardware to complete the installation. Braided stainless steel flex lines are supplied for each specific application. Order the TX4R Big Brake kit recommended for your vehicle.

5.0 out of 5 stars ( 1 )

$2,741.70

FiTech Ultimate LS EFI 500 HP Fuel Injection Systems with Go Fuel In-Tank Module

FiTech Ultimate LS EFI 500 hp fuel injection systems with Go Fuel in-tank module combines incredible engineering and construction for top-of-the-line performance. FiTech fabricated many billet aluminum parts for their Ultimate LS EFI 500 hp systems, including a 92mm throttle body, high-volume fuel rails, and a 1,500 to 6,500 rpm powerband intake manifold. They combine sequential spark and fuel control with 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touch screen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. The Go Fuel in-tank module universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. Whether you're starting with a 5.3 junkyard dog or a crate motor, FiTech Ultimate LS EFI 500 hp systems with Go Fuel in-tank module will look and run exceptionally. Additional Ultimate LS features: * Optional GM transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touch screen hand-held controller with data log features * Suction cup mounting bracket

5.0 out of 5 stars ( 1 )

$2,089.99

—

$2,726.99

Eddie Motorsports LS Chevy S-Drive Serpentine Pulley Drive Systems

Eddie Motorsports LS S-Drive serpentine pulley drive systems for Chevrolet LS engines are the latest advancement in engine accessory kits on the market. These drive system pulleys and brackets are CNC-machined from 6061 T-6 aluminum and include stainless steel fasteners, as well as other necessary accessories: water pumps, alternators, serpentine belts, A/C compressors, billet aluminum water outlet, and a SFI approved balancer. Change the efficiency of your engine with a single 6-rib serpentine belt to drive all of your accessories.

5.0 out of 5 stars ( 4 )

$2,393.95

—

$3,515.95

2012 CHEVROLET Parts and Accessories