Availability
Showing In Stock Items. Show All 254 Items.
ACDelco offers rear main seal housings for a wide range of year/make and engine applications. The one-piece aluminum replacements are designed, engineered, tested, and backed by General Motors. They are validated OE parts for specific Chevrolet, Buick, GMC, and Cadillac vehicles. These components are designed to give the engine oil leak protection from between the crankshaft output flange and the engine block. Order the engine crankshaft seal housing recommended for your ride.
( 8 )
$66.99
Give your ride an attitude adjustment with ACDelco crankshaft position sensors. Your original sensor can become worn or burnt and sensitive to hot engine temperatures, leaving you sitting on the side of the road. ACDelco offers high-quality, direct-fit replacement crankshaft position sensors to respond to your car's needs. Dozens of models are available for fitment on thousands of vehicles from the 1980s and up. Enhance the efficiency and performance of your ride; order the crankshaft position sensor recommended for your application.
( 10 )
$59.99
Chevrolet Performance composition head gaskets are recommended for stock and mildly modified engines. They're available in a variety of bores, compressed thicknesses, and volumes for fitment on specific vehicle and engine applications.
( 121 )
$99.99
ACDelco GM Genuine Parts oil pan gaskets are genuine parts that will provide the same performance, durability, and service life as the factory originals. Choosing the best quality to maintain your GM vehicle is easy--ACDelco GM Genuine Parts has the right fit, function, and form for confident, hassle-free service.
( 5 )
$51.99
Hayden Rapid-Cool transmission oil coolers take the heat, so your vehicle won't! Over 14-million transmissions fail every year, and 9 out of 10 are from overheating. Rapid-Cool's unique plate and fin design combines cooling expertise and space efficiency; multiple sizes are available. Their patented internal turbulation provides better heat transfer. Lower your operating temps with a pioneer in cooling: Hayden!
( 162 )
$52.99
—
$61.99
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 19 )
$54.99
These Sealed Power MA Series main bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank whose surface hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better control of wall variance. It also helps to minimize debris embedding, which can score the crank's surface.
( 76 )
$94.99
Use Dorman engine rear main seal covers to ensure the proper sealing of your engine, to stop and/or prevent engine oil leakage. They are made from high-quality materials and are available as direct replacements for a proper fit on various makes and models. Whatever your repair needs, Dorman has just what you're after!
( 10 )
$53.95
Mahle Original offers a choice of cylinder head gaskets to fit your project with the most effective, leak-free seal. Because vehicles and performance levels are as different as the people who drive them, a head gasket that works for you may not work for another. Mahle Original knows this. Their list of head gasket materials includes multi-layered steel, Solicor, VR-2000, Nitroseal, and VR500. Each does their job differently, but you can rest assured that the sealing job they do will be effective and efficient. Positive sealing is available with Mahle Original cylinder head gaskets. Order the style designed for fitment with your vehicle and engine application.
( 45 )
$77.99
Summit Racing™ offers OEM GM flex fuel sensors for a wide range of applications, including many Chevrolet, GMC, Buick, and Cadillac models from 2011 and up. These replacement sensors measure the ethanol/gasoline ratio of the fuel being used—and then send a signal to your ECM so adjustments can be made for optimum operation of your flexible fuel vehicle. The sensors are made from factory materials and specs to ensure proper fit and performance. Ensure the fuel system efficiency you expect; order the model recommended for your vehicle.
Not Yet Reviewed
$79.99
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 555 )
$87.95
—
$92.35
Replace your timing chain with a new one from Chevrolet Performance. Designed specifically for your engine, many applications are available.
( 1 )
$74.99
With Summit Racing™ branded, all-100 percent silicone 8mm constructed wire, a 300 ohm per foot wire-wound EMI suppression core, high-heat silicone boots, and stainless steel and brass terminals, you get all the high-end features a wire set can offer, without breaking the bank! * Dual silicone high tear-resistant jacketing with fiberglass matting gives you the highest heat protection and superior terminal pull-off values in the business * Our 300 ohm per foot wire-wound magnetic suppression core maximizes the voltage output of your ignition system, while maintaining high EMI resistance values * Stainless steel terminals with posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery * Ultra-high heat silicone spark plug boots provide superior radiant heat protection -- High dielectric strength properties virtually eliminate voltage leakage and blow through Installing our Summit Racing™ high-end 8mm sets will give you the confidence, reliability, and performance you expect from Summit Racing™ products.
( 1018 )
$55.99
—
$57.99
Chevrolet Performance engine coolant crossover pipes are designed to vent the coolant to ensure that the coolant reaches the highest point on the cylinder heads and doesn't get blocked by an air pocket. They are manufactured from quality materials and install in the stock location for a direct fit.
( 6 )
$59.99
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 139 )
$53.99
—
$95.99
On Sale
Mr. Gasket offers replacement water necks in a variety of styles, materials, finishes, sizes, and angles. Water necks help to hold the vehicle's thermostat in place as it opens and closes—to regulate the flow of coolant through your engine. The opening in the water neck created by the thermostat allows coolant to flow from the radiator back to the engine. Order the model recommended for your vehicle.
( 117 )
$51.19
—
$64.65
Summit Racing™ OEM LS valve covers make a great choice to service and maintain your vehicle's LS engine. They are made from premium materials to OEM specifications for proper fit and performance, as well as good looks under the hood. Choose the replacement valve covers for your application.
( 7 )
$57.99
—
$76.99
ICT fuel injector spacers adapt shorter LS injectors into taller LS intake manifolds and fuel rails. Manufactured from aerospace-grade billet aluminum, the spacers are available in multiple choices to add length to your fuel injectors. ICT Billet spacer sets also include O-rings. Choose the parts designed for your specific application.
( 28 )
$58.99
ACDelco drive belt tensioners keep your belts just right—not too loose, not too tight. They offer a perfect complement to the full line of ACDelco belts with high-quality bearings that resist dirt and salt. Hundreds of models are available, with a variety of pulley styles. Reduce belt wear and keep them taut with the long-lasting replacement drive belt tensioner designed to fit your application.
( 39 )
$89.99
—
$95.99
Chevrolet Performance rocker arm stands mount between the shaft and cylinder head for the correct rocker arm mounting position. These rocker arm stands are quality-made for a lifetime of service.
( 15 )
$62.99
On Sale
The original GM brazed vent tube manifold does not take into consideration the aftermarket intakes and accessories we put on our performance vehicles. Replace the rigid hard lines with Earl's Performance LS steam vent adapters. These adjustable outlets are O-ring seal adapters designed to convert to -3 or -4 AN plumbing. Earl's steam tube adapters are the most adjustable and lowest profile available. These adapters look as nice as they are installation-friendly. There are several kits available to allow for the optimal routing on your application, including dual outlet options, which eliminate the need for a Tee adapter.
( 18 )
$66.59
—
$84.55
Summit Racing brings you our ultimate ignition wire with our 8.5mm 50ohm wire sets. They are made with 100% high tear resistant silicone construction, a 50ohm per foot Wire-Wound FERRITE magnetic suppression core, stainless steel and brass terminals and extreme heat-resistant boots. Only the highest quality raw materials and Made in the USA workmanship, go into every set. The 100% High-Tear resistant silicone jacket protects the inner ferrite core from heat breakdown. The dual silicone layers are bonded together using a tightly woven fiberglass matting that virtually eliminates terminal pull off. Our 50-ohm ferrite core has over 3 FEET of nickel/copper mag winding per INCH! With this tightly wound core, you can be assured that your spark plugs are getting all the power your ignition system can provide. Stainless steel terminals with Posi-lock hardened clips and brass terminals are used on all applications; for superior connection and consistent voltage delivery. High heat silicone and high dielectric strength polymers make up the extreme composition of the spark plug boots. Our boots provide superior radiant heat resistance for longevity and high dielectric strength properties to prevent voltage leakage. With all of these features built into our Race-proven 8.5mm 50-ohm sets, you can be assured that installing one of these sets on your engine will give you all the performance and durability you have come to expect from Summit Racing products.
( 197 )
$68.99
Performance Tool keeps it simple. Their harmonic balancer puller kits give you what you need to easily remove harmonic balancers from a variety of engines. They are made from quality alloy steels and include an assortment of bolts. Additionally, their design helps prevent damage to the pulley and shaft. Regardless of your vehicle type or budget, Performance Tools has the perfect harmonic balancer puller for you.
( 49 )
$64.99
Cometic Gasket's commitment to cutting-edge technology has produced superior-quality gaskets like these Cometic MLS exhaust gaskets. They are constructed from multiple layers of strong stainless steel that has excellent rebound ability and corrosion-resistant characteristics. Outer layers are coated with a heat-resistant, rubber-based material to create a seal that can withstand a variety of sealing and load conditions and surfaces. Cometic MLS exhaust gaskets are ideal for all types of head and block material and their design promotes an even torque load across the sealing surface, allowing for measurably reduced bore distortion.
( 33 )
$87.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
