Availability
Showing In Stock Items. Show All 15 Items.
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 139 )
$334.95
—
$849.95
On Sale
Dragsters and hot rod racers attain speeds between 200 and 300 mph, so every safety precaution can spare you from serious injury or worse. Competition Engineering 8-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including sport compacts and models from AMC, Chrysler, Dodge, GM, and Ford. Competition Engineering 8-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 8-Point Roll Bar Main Hoop Kit, which includes the main roll bar hoop * 8-Point Roll Bar Strut Kit, which includes a main hoop crossbrace, two front door bars, two rear struts, two diagonal hoop supports, six weld joint gussets, and eight 6 in. by 6 in. by 1/8 in. thick steel mounting plates * Complete instructions for a hassle-free installation
( 37 )
$414.99
—
$774.99
$373.49
—
$697.49
Trackspec Trackday Series bolt-in roll bars are available for a wide range of cars, such as Corvettes, Camaros, and Firebirds. Over the past few years, Trackspec has become the leader in roll cage installations and design. As part of the SPEC Corvette racing series, they were driven to develop the best solutions on the market for rollover safety, starting with their DIY Roll Cage kits. For those not looking for a full roll cage, Trackspec developed the best bolt-in 4-point roll bar on the market for the 1982-92 3rd generation Camaro. Many roll bars on the market mount to the floor, which can be a less-than-ideal mounting solution. The Trackspec solution resolves all of this by mounting the main hoop to a vertically supported shelf near the rear seat buckets. They accomplished this by using advanced technologies to develop a billet machine aluminum plate that distributes the load of the main hoop evenly and across a larger surface area. By doing so, Trackspec achieved a stronger mounting solution and ease of installation. The rear down tubes also mount to a supported portion of the unibody structure. Further, the vertical portion of the rear wheel tubs is tied in to increase mounting strength. Order the roll bars recommended for your vehicle. Additional product details: * Industry-leading main hoop mounting solution using oversized billet machined plates to distribute loads on a vertically supported part of the unibody * Rear kicker bars attach to supported portion of the unibody for a strong and secure mount * Rear bars are detachable using TIG-welded couplers for ease of installation and shipping * Driver and passenger seats maintains full articulation * Meets and exceeds NASA and SCCA time trial 4-point bolt-in requirements * Installs easily with simple hand tools in 2-3 hours * Comes fully powdercoated in standard colors * Retains all plastics and rear seat bottoms * Upper rear seat must be removed * Can be unbolted in minutes if needed * All bars are tucked as high and as tight as possible * Made of 1.75 in. .095 in. mild steel DOM * Includes all mounting hardware
( 1 )
$2,049.99
—
$2,199.99
Rhodes Race Cars SCCA, NASA, and Drift roll cages are made specifically for hobbyists and for serious racers looking to compete in SCCA, NASA, or Formula D events. All road race cages feature a main hoop diagonal and dual door bars (can be made into dual X-bars). They are weld-in cages and feature notched tube ends (where applicable) for ease of installation. Roll cages are offered in these materials: * 1 5/8 in. O.D. 0.134 in. wall ERW mild steel tubing * 1 5/8 in. O.D. 0.120 in. wall DOM tubing * 1 5/8 in. O.D. 0.083 in. wall 4130 chromoly tubing DOM tubing is very strongly recommended; ERW cages will most likely NOT pass tech inspection for most classes. Chromoly is not recommended by most sanctioning bodies. Due to different requirements for specific classes and weights, you should check with your track or sanctioning body for specific guidelines prior to purchase. It is the installer's responsibility to assure that a cage meets race organization rules as to tubing material and sizes, fit, placement of components, and welding. Note: Because of differing driver sizes and main hoop locations, roof hoop and windshield down bars are not notched. Some minor trimming may be required during installation.
( 2 )
$574.95
—
$999.95
Ensure your car meets the NHRA safety standards with Fathouse Performance weld-in roll cage kits. Designed and engineered from Docol R8—an advanced, high-strength tubing steel—FP kits are built to satisfy 8.50 ET specs, while providing the best fit possible. They ship pre-bent/notched ready to prep for welding and installation. Contents: * 1/8 in. steel floor plates * 1 5/8 in. Docol tubing * 1 1/4 in. Docol D bars * Steering column mounts Note: Step-by-step instructions are NOT provided with this kit. Fathouse Performance highly recommends professional installation.
Not Yet Reviewed
$1,999.99
Rhodes Race Cars Lemons and Chumps roll cages are specifically designed for those of you looking to compete in 24 Hour of Lemons and ChumpCar Series races. RRC has taken out all of the guess work and come up with these easy-to-install kits. All the tubing is pre-bent and notched for ease of installation. Rhodes Race Cars Lemons and Chumps roll cages are available in ERW mild steel, DOM, and chromoly. ERW mild steel is accepted by both sanctioning bodies, but DOM is very strongly recommended. Chromoly is generally NOT recommended for this type of racing. Check your sanctioning body's rules before you order! Note: Some minor trimming may be required during installation. All RRC cages are weld-in cages.
( 4 )
$574.95
—
$999.95
On Sale
Competition Engineering 10-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including models from GM, Chrysler, Dodge, and Ford. Competition Engineering 10-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 10-Point Roll Bar Main Hoop Kit, which includes the main hoop, top hoop, main hoop crossbrace, two diagonal hoop supports, and two front downstruts * 10-Point Roll Bar Strut Kit, which includes two rear struts, two door bars, weld joint gussets, and steel mounting pads (6 in. by 6 in. by 1/8 in thick) * Complete instructions for a hassle-free installation
( 21 )
$616.99
—
$1,176.99
$555.29
—
$1,059.29
Rhodes Race Cars roll cage conversion kits are designed to convert your existing roll bar into a 10, 12 or even 14-point roll cage. RRC conversion kits meet or exceed the NHRA and IHRA requirement for roll cage tubing. These kits include roof tubes, windshield post runners, and dash crossmember. Conversion kits may be available in any of the following materials: * 1-5/8 in. x .134 in. wall mild steel tubing * 1-5/8 in. x .120 in. wall DOM tubing * 1-5/8 in. x .083 in. wall 4130 chromoly tubing Note, because of differing driver sizes and main hoop locations, these kits are not notched!
( 6 )
$294.95
—
$414.95
Bestop sport bar covers make it easy to replace the fabric covers on your sport bars with a clean, custom look. Made from mildew-resistant fabric with UV inhibitors, these covers are offered in factory-original colors. Their industrial-strength thread ensures durable performance, and are compatible with all Bestop soft tops and accessories.
( 3 )
$399.99
Allstar Performance offset deluxe roll cage kits are ideal for use with template-style or ABC bodies. They can, of course, be purchased complete—or via individual components, such as main hoop assemblies, curved door bars, and door bar spacers. This component box kit is a perfect fit with either Allstar's 54 in. or 57 in. wide offset kit frames.
( 1 )
$231.99
Rugged Ridge roll bar cover kits dress up your vehicle's roll bar with lightweight foam and summer soft goods fabric. These covers easily install using zippers and hook-and-loop attachments. Special cutouts for seat belt locations make the covers look streamlined. The kits are available for Jeep models from the 1970s and up. Order the cover set designed to fit your application.
Not Yet Reviewed
$199.99
On Sale
Dragsters and hot rod racers attain speeds between 200 and 300 mph, so every safety precaution can spare you from serious injury or worse. Competition Engineering 12-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including models from GM, Chrysler, Dodge, and Ford. Competition Engineering 12-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 12-Point Roll Bar Main Hoop Kit, which includes the main hoop, top hoop, main hoop crossbrace, two front downstruts, and two forward struts * 12-Point Roll Bar Strut Kit, which includes two rear struts, two door struts, a rear X-brace, two diagonal hoop supports, 12 weld joint gussets, and 10 steel mounting pads (6 in. by 6 in. by 1/8 in thick) * Complete instructions for a hassle-free installation
( 4 )
$1,366.99
$1,230.29
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
