Availability
MSD ignition controls are the most successful aftermarket ignitions ever made. The multiple spark design has won races and championships in every type of motorsport. MSD ignitions are consistent, reliable and durable, even under extremely harsh conditions. The results speak for themselves--more power, easier starting, quicker throttle response, smooth idle, and improved fuel consumption.
( 37 )
$549.95
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1950 )
$118.95
—
$131.95
GM performance fans will be geeked to learn about MSD's direct plug-in 2-Step launch controls for LS engines. These units are easy to install with factory-style connectors for a splice-free installation. When you're staged, you can hold the pedal to the floor, while the rpm stays at a consistent level, producing consistent launches.
( 86 )
$349.95
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 619 )
$225.15
$54.97
—
$699.95
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 640 )
$499.95
$46.09
—
$499.95
On Sale
These MSD Ford Blaster Coil-on-Plug ignition coil packs feature a patented winding design and direct bolt-in replacement. The improved spark energy and voltage of the coil packs, combined with their reliability, have made them a favorite of performance enthusiasts. They are designed as direct bolt-in replacement coils for many SOHC Ford V8 modular engines. The housing and installation are the same as the factory coils, but that is where the similarity ends. Inside the MSD coil packs, engineers used better quality materials to assemble the primary and secondary windings. The MSD Ford Blaster Coil-on-Plug ignition coil packs take the spark energy right out of the coil and put it across the plug gap to improve the combustion and output of the engine.
( 364 )
$99.95
$38.51
—
$522.95
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components--especially when they improve performance like these MSD direct replacement ignition coil packs. They are designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and improved midrange rpm power.
( 60 )
$368.95
$31.82
—
$461.95
MSD Blaster Power Sports ignition coils deliver the most energy for easier starting, quicker throttle response, and powerful spark energy throughout the rpm band of your powerplant. Power Sports coils are direct bolt-on, plug-in replacements for factory units on many popular powersports machines. If you demand maximum performance for maximum fun, these easy, economical MSD upgrades are the perfect fit for your ATV, UTV, motorcycle, snowmobile, or jet ski. Benefits include: * Available in red and black * Optimized coil engineering * Easier starts * Smoother idle * Crisper throttle response * Improved power from idle to redline * Supplied with mounting bracket and hardware
( 4 )
$155.95
On Sale
MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.
( 239 )
$449.95
—
$499.95
This MSD 2-Step launch controller connects right to your late model Ford to produce consistent launches and quicker 60-foot times by setting an rpm limit to stage with. When activated, the rpm will be held at a steady rpm and once the green light comes on, release the clutch and take off. The rpm is adjusted with two built-in rotary dials ranging from 1,800-9,900 rpm in 100 rpm increments. A handy LED shows when the launch rev limit is active.
( 8 )
$315.95
As LS engines make their way onto the race track MSD is ready with the Circle Track LS ignition controls. You're off to the races with MSD. Circle Track LS ignition controls feature: * Direct plug-in to factory GM LS sensors and coils * Preprogrammed to run the GM CT525 crate engine out of the box * Laptop programmable rpm limit, timing curve, and coil selection for custom tuning * Auto detects coils, cam sensor, and crank sensor * Will run 24x 1x, 58x 1x, and 58x 4x crank/cam sensor combinations * Self-powered with USB for laptop programming * Steady, accurate timing control * Dedicated plug for Tech Official
Not Yet Reviewed
$549.95
MSD's distributor hold-down clamps are strong enough to keep the timing locked in place whether you are using an MSD billet distributor or Pro-Mag. These MSD hold-down clamps are precision-made and fit all MSD Pro-Billet Chevrolet distributors and the Pro-Mags. Each of these clamps includes a mounting stud, lockwasher, and nut.
( 24 )
$59.75
MSD ignition coil pack wiring harnesses are designed to connect your ignition coil pack to your aftermarket or OEM ignition. They can be used on both carbureted and fuel injected engines, making them an excellent choice for any application.
( 24 )
$104.95
MSD coil current boosters provide added power to your Ford coil-on-plug engine to support additional horsepower. They also provide a 2-step rev limiter to consistently launch your car off the line. The MSD boosters increase the peak current at the ignition coil and spark energy at the plug gap, making them ideal to support engines with increased cylinder pressure from bumped-up compression ratios, a shot of nitrous, or boosted applications. The 2-step rpm adjustments are made via two rotary switches adjustable from 1,000 to 10,900 rpm, in 100 and 1,000 rpm increments. Just plug them in to the factory wiring and hook up the activation wires as needed and you're set. MSD coil current boosters feature: * Increased current at the ignition coil * Increased spark energy at the spark plug * Built-in 2-step rev limiter for consistent launches and quick 60 ft. times * Quick, easy solution to increase ignition power on Ford modular engines * Factory-style wiring connectors plug directly into stock coils and harness
Not Yet Reviewed
$632.95
The 6-Mod Ignition Controller was originally developed for the 4.6 and 5.4-liter modular motors that were fed through a carburetor rather than an electronic fuel injection system. However, with the useful options that the 6-Mod provides, such as two rev limits, a step retard and easy control over the timing, the EFI people wanted a way to take advantage of the adjustment. The harness kit provides a splice-free installation of the MSD 6-Mod Controller to factory equipped EFI vehicles making installation a snap. All of the connectors plug directly to the factory units so there is no cutting or splicing of your factory wires. Once installed, the 6-Mod allows users to advance or retard the factory's timing curve, program a step retard for use with nitrous systems or even map out a timing curve through a laptop by using MSD's Pro-Data+ software.
( 4 )
$899.95
On Sale
MSD flying magnet crank triggers use four magnets permanently embedded in an aluminum wheel. As the crank rotates, the magnets pass a non-magnetic pickup, which triggers the ignition. These MSD systems include a trigger wheel, pickup, CNC-machined aluminum mounting bracket, and hardware.
( 51 )
$699.95
$384.95
—
$732.95
On Sale
When tested against a competitor's coil, the MSD Pro Power coils produced 33 percent more current at the plug. They have an oil-filled insulated polyester case, an extra-tall high-tension spark plug tower to stop voltage leaks, and rubber shock mounts. They're designed for drag race use only, with MSD 7 and 8 Series ignitions.
( 40 )
$1,099.95
$733.46
These replacement starter solenoids from MSD are direct replacements for your MSD APS starter only. Your starter solenoid is a vital part of your vehicle that relays a large electric current to the starter motor, which in turn sets the engine in motion. If it fails, you're not going anywhere. Don't take a chance with an old, questionable, or malfunctioning starter solenoid that could leave you stranded--replace it with a new one from MSD Ignition.
( 3 )
$78.15
MSD iridium spark plugs will fire up your engine for optimum performance. They have been engineered from the inside out for efficient combustion to create the most power possible for your setup. MSD's proprietary design features center tips made from iridium--a super hard material that promotes the best spark as well as increased resilience. These plugs also feature copper center cores, special ceramic material to enhance the dielectric strength of the plug housing, and machine-ground straps enhanced with Yttrium to handle the heat of your high horsepower ignition. On the street, at the track, or up and over the trails, MSD iridium spark plugs will outperform and outlive the competition.
( 1 )
$8.99
Make installation a breeze with MSD ignition coil brackets. They're crafted from aluminum and are made for the specific purpose of keeping your coil braced.
( 6 )
$218.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
