Availability
Showing In Stock Items. Show All 46 Items.
Today, life is a bit easier! Trick Flow® engine steam line fittings for GM LS are available to upgrade the factory steam tubes of your modified LS-powered cars and trucks to update your race car plumbing system. The fittings are black anodized billet aluminum and attach to the corners of your GM LS cylinder heads. They feature -4 AN male threads and include O-rings and stainless steel bolts. Upgrade to easy with Trick Flow® engine steam line fittings for GM LS.
( 13 )
$14.99
—
$18.99
Summit Racing™ coolant crossover delete kits allow you to block off the rear coolant crossover or steam passages on your LS cylinder heads. The low-profile design gives extra clearance and does not require removal of the block-off when removing the cylinder head bolts. These delete kits include two billet aluminum plugs, O-rings, and bolts. Order the kit recommended for your year/make and engine application.
( 3 )
$19.99
McLeod offers a variety of small parts, fittings, and connectors needed to finish your hydraulic conversion—including these clutch line clips. The quick-disconnect retaining clips are machined from steel and will provide a secure connection for your lines. They were original equipment on 2005-23 Ford Mustang 2.3L to 5.8L models.
( 2 )
$10.50
Dorman heater hose connector fittings are available for a wide range of cars, trucks, and vans--both application-specific and universal models. These parts can be used as replacements in areas such as the heater core inlet and/or outlet, and the radiator surge tank. The fittings are stocked in various sizes, materials, and shapes (straight, elbow); some are hose barb style, while others are quick-connect. Eliminate aggravating leaks in your cooling system with the help of these Dorman heater hose connector fittings.
( 56 )
$10.99
—
$20.99
Summit Racing™ billet fuel vapor purge solenoid plugs provide a simple and easy way to replace the factory solenoid in a legally acceptable engine swap application. The plugs block off the EVAP port and install in seconds. We include the plug, bolt, and O-ring.
( 2 )
$11.99
Tired of bruised knuckles and a greasy mess when lubing auto parts? The engineers at Moog have developed heavy-duty steering idler arm grease hose kits that help to easily lubricate fittings and restore handling performance. And without the pain and hassle. Order the kit recommended for your vehicle application.
Not Yet Reviewed
$18.99
Modify your factory master with RAM clutch adapter fittings. These fittings are available to fit your master to -3 AN male, -4 AN male, GM and Ford 2005 and later.
( 5 )
$20.00
ICT Billet oil level sensor and sending unit plugs are available for a variety of engines. They can be used when deleting or relocating your oil pressure sending unit--or to delete the oil level sensor in your factory oil pan. These quality delete plugs are made of aluminum and include a crush washer or O-ring, depending on the application.
( 11 )
$13.99
—
$17.99
Ford Genuine Parts turbocharger coolant line fittings offer several advantages, primarily focusing on reliability and longevity. By replacing OEM fittings with more robust AN fittings, you can eliminate common coolant leaks and ensure a permanent, leak-free solution. These fittings are also designed to withstand high temperatures and pressures, enhancing the overall durability and performance of the turbocharger. While aftermarket parts may be cheaper upfront, they often require frequent replacement due to inferior quality. Investing in genuine Ford parts can save you money in the long run by minimizing repairs and maximizing the lifespan of your vehicle.
( 1 )
$13.99
—
$15.99
Mcleod offers a variety of adapter fittings to ease in transmission installation. These adapters allow the use of factory disconnect fittings when performing a transmission swap.
( 18 )
$13.75
Trick Flow® engine coolant plugs for GM LS are for coolant holes on exhaust faces. They are zinc plated steel with a hex head/13mm wrench and include an aluminum sealing washer. These Trick Flow® coolant plugs fit all LS cylinder heads.
( 2 )
$14.99
Russell speed bleeders let you bleed the brake lines on just about any vehicle all by yourself. Just replace the old bleeder screws with speed bleeders. They have an internal check valve that will pump excess air and fluid out for you. A special coating on the speed bleeders' threads keep them from admitting air into the system, and keep expelled air and fluid out. When you're done, just tighten the screws and go on to the next brake cylinder.
( 259 )
$15.95
—
$15.99
Bleeding your brakes is critical in keeping your ride in top performance. Dorman brake bleeder screw assortments allow you to do just that. They are made of high-quality materials and are a sure way to make bleeding your brakes a breeze. Screw assortments contain two of each of the following sizes: * 1/4-28 in. x 15/16 in. * 5/16-24 in. x 1 in. * 3/8-24 in. x 1 1/4 in. * M10-1.0 x 35mm * M10-1.5 x 30mm
( 4 )
$11.99
These Dorman brake speed bleeder screws are designed to make bleeding your brakes easy. The internal check valve allows you to back the screw out, pump the brakes to bleed out old fluid or air, and then retighten them to complete the job. No air can come back into the system and, best of all, it is easy to do by yourself. You won't have to wait for someone else to help or need expensive tools any longer. Take the headache out of bleeding your next brake job with these Dorman brake speed bleeder screws.
( 40 )
$12.99
Walker weld-in oxygen sensor fittings work with most OEM and aftermarket sensors. They are ideal for custom or do-it-yourself fabricators building headers for computer-controlled cars or trucks using an oxygen sensor.
( 1 )
$12.99
These Hayden Automotive transmission line fittings will help you adapt your existing transmission lines to the transmission cooler. Made of durable brass, these fittings are corrosion-resistant for a lifetime of good use.
( 26 )
$13.99
—
$15.99
ICT Billet LS engine block oil passage galley plugs are OEM replacements. Each steel plug is zinc coated for corrosion resistance and comes pre-applied with thread sealant. Fill the various oil passage outlets in your engine block with ICT galley plugs.
( 2 )
$19.99
GM Genuine Parts engine oil drain plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These replacements are true OE parts installed during the production of or validated by General Motors for GM vehicles. They're designed, engineered, and tested to rigorous standards, and are backed by General Motors. Plugs are available for thousands of applications; order the style recommended for your vehicle.
( 3 )
$10.99
ACDelco offers a line of brake banjo bolts in a range of thread sizes and lengths for various applications. All of their 'brake hydraulic hose to caliper bolts' are constructed from high-quality materials for long-lasting durability. They're conveniently packaged in a variety of piece counts to assist with both small and large projects. Order the ACDelco brake banjo bolts designed to fit your application.
( 2 )
$15.99
Motorcraft fuel rail pressure relief valves are OEM replacements for your Ford, Lincoln, or Mercury vehicle. These shrader-style valves can be used for pressure checking, purging air from the system, and even introducing injector cleaner into the system, so it is important that it remains functional.
( 3 )
$10.99
Let's face it. Sometimes a project doesn't work out the way we want. ICT Billet coolant crossover bolt kits will help to keep your project moving forward. Each kit contains four Grade 10.9 bolts. They are compatible with many GM LS Series engines. Check the Applications to verify fitment for your engine's year.
Not Yet Reviewed
$17.99
Continental heater hose connector fittings are general-purpose cooling system connectors designed for your heater and radiator hose applications. These glass-filled black nylon connectors have a temperature range of -50 F to +275 degrees F. Fit your vehicle system with quality heater hose connectors from a name you can trust--Continental.
( 3 )
$14.99
ICT Billet replaces your factory LS water pump fittings for the heater core. Made from aerospace grade billet aluminum, they are compatible with all GM LS Series water pumps.
( 1 )
$18.99
Derale Performance transmission line fittings will help you adapt your existing transmission lines to the transmission cooler. Made of durable aluminum, these fittings are corrosion-resistant for a lifetime of good use.
( 44 )
$17.16
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
