Availability
Spicer Drivetrain Products light-duty U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat-treated for maximum life. The bearing cups are case-hardened for strength and durability, while the seals are crafted from nitrile rubber for optimum grease retention and contaminant exclusion. Ample grease reservoirs in each trunnion assure effective lubrication; they're pre-filled with high-quality synthetic lithium grease, providing superior friction-reduction and resistance to higher temperatures. These replacement universal joints are available for dozens of positions, in greasable and non-greasable styles. Order the model designed to fit with your vehicle and engine type.
( 149 )
$19.99
Summit Bucks
All Balls Racing wheel and carrier bearing seal kits are hands-down the most complete line of bearing seal kits on the market! They are available in a wide variety of powersports applications, from ATV and off-road to street bikes. These All Balls Racing wheel and carrier bearing seal kits have premium high-speed bearings that feature low-drag, double-lip seals on both sides to provide superior exclusion of water and dirt and improved grease retention. High performance Chevron SRI-II grease features special rust inhibitors for the most demanding applications. Type TC nitrile elastomer wheel seals are specifically designed to keep out water and dirt. Their rubber coated outside diameter helps to create an optimum seal at the hub.
( 20 )
$33.35
—
$81.35
All Balls U-joints are cold-forged from SCM-415 steel with HRC58-61 case-hardened and precision-ground journals for extra fortitude. The bearing cups feature a quad lip seal and centrally located grease Zerk and channels to evenly distribute grease and keep contaminants out. The U-joints are pre-greased with high-temperature Lithium Complex 3 grease—and a cap plug is included to eliminate grease Zerk in low-clearance applications. Replace the old, with the new high-quality All Balls Racing U-joint kits.
( 4 )
$30.22
On Sale
XDR Magnum Grip Hill Killer gated shifters have an ergonomic design and a modern aggressive look. These gated shifters are designed to be used as a safety device when attempting steep hill climbs. This is accomplished by eliminating the reverse lockout feature of the ratchet gate plate—ensuring quick shifts from forward to reverse gear in an attempt to save the front-end from going over backwards when climbing steep hills. XDR Magnum Grip Hill Killer gated shifters are available to fit Side x Sides with or without factory shift boot. Features include: * CNC-machined billet aluminum construction * Replaceable Midnight black polycarbonate side grip plates that incorporate a diamond design pattern for a sure grip when shifting * Spring-loaded stainless steel trigger for positive locking and unlocking in and out of park * Hill Killer gate plate construction—10-gauge 304 stainless steel for durability and long life * Tough MIL-spec anodized finish * Side grip plates are customizable (with numerous colors of the optional polycarbonate side grip plates, or the real rosewood option) * All necessary hardware and easy-to-follow instructions
( 3 )
$349.95
$192.95
Quadboss CV boots are made from DCR66 rubber that is specifically formulated to withstand the tortures of the ATV/UTV market. They are much easier to install than typical OEM boots. Stainless steel clamps do not even require any special tools for installation. These boot kits have 40 percent higher tinsel strength over the OEM boots and are 50 percent more abrasion resistant. Replace your worn out CV boots with Quadboss CV boot kits today.
Not Yet Reviewed
$18.42
Summit Bucks
All Balls Racing tie rod boot kits are the ideal service kits. Made from materials designed to handle the difficult environments that your UTV or ATV faces, the kits meet and exceed OEM specs. Each kit includes both right and left tie rod boots and zip ties.
Not Yet Reviewed
$30.22
Sierra Marine heavy-duty U-joints include both straight and 90-degree grease fittings. These universal joints are direct-fit units providing the same performance. Service and maintain your watercrafts with Sierra Marine.
Not Yet Reviewed
$23.99
EPI Performance offers universal joints for a wide range of ATV/UTV applications—including models from Polaris, Kawasaki, Suzuki, Can-Am, Bombardier, and Yamaha. Designed to meet or exceed OE part specifications, these replacement U-joints include a spider, four bearings, four circle clips, and a grease zerk. They're available for more than a dozen positions on your off-road machine.
( 1 )
$23.99
EPI Performance Belly Buster weights are made from billet tool steel, heat treated, and plated for extended life. These Belly Buster weights produce stronger low and mid range pull and dynamic upshifts. With these aggressive style bushed weight, you can't go wrong when you're out on the trail.
Not Yet Reviewed
$135.99
DragonFire Racing shifter knobs are constructed from CNC-billet aluminum in several designs to complement your style and your off-road machine's interior. They offer black anodized round styles with contrasting silver accents or machined holes (Ultra-Lite) and long slim and short wide styles in a gray or red carbon fiber finish. All shifter knobs include inserts for Polaris and Can-Am models, fit 5/16 in.-18 thread and M8 x 1.25, and are topped with the DragonFire Racing logo.
Not Yet Reviewed
$45.99
—
$51.99
On Sale
XDR Off-Road Magnum Grip gated shifters are performance components for your UTVs. The shift handle features CNC billet aluminum construction, an ergonomic design for a modern aggressive look, replaceable midnight black polycarbonate side grip plates, and a spring-loaded stainless steel trigger for positive locking and unlocking between gears. XDR Off-Road Magnum Grip gated shifters include a security feature that allows a standard padlock to be installed, preventing unwanted use of the vehicle. Features may include: * MIL-Spec anodized black finish * One-piece CNC-machined 304S stainless steel gates * CNC billet aluminum Magnum Grip shift handle * Replaceable Magnum Grip side grip plates * Bushing rod and trigger * Necessary hardware and easy to follow installation instructions * B&M Racing gated shifter reliability * Lifetime limited warranty
Not Yet Reviewed
$365.95
Quadboss universal joints feature a heavy-duty construction for increased static strength and longer life. Their precision-ground trunnion and bearing surfaces ensure trouble-free operation. Each Quadboss universal joint is manufactured for a perfect fit in every application!
Not Yet Reviewed
$30.06
You like extremes; you need EPI Performance Severe Duty belts. Able to withstand the heat and stress that your powerful machine inflicts, these belts are created with EPI's exclusive compound, which provides outstanding adhesion to the clutch surfaces and withstands extreme temperatures, while the deep double cogs reduce clutch heat. The experts at EPI know that clutching and belts go hand in hand. They also know that blowing a great ride on a less-than-able belt isn't smart. You run extreme horsepower, extreme torque, extreme environments; you definitely need Severe Duty belts from EPI Performance!
( 3 )
$133.99
All Balls Racing center support bearing kits outperform OEM. They are more aggressive and will keep dirt and water out of the bearing better. Give your driveshaft the support it needs; upgrade your factory bearings to All Balls Racing center support bearing kits for greater longevity and performance.
( 3 )
$55.26
All Balls Racing complete 8-ball extreme-duty CV axles are designed for more aggressive applications. They'll take on the rough terrain and abuse you put your ATV/UTV through on a frequent basis. These CV axles are static torsion and fatigue-tested, as well as built in facilities that are certified and meet the ISO 9001 quality manufacturing standard—providing you with peace of mind when you're out on the trail. Key features and benefits: * Eight precision ball bearings deliver smoother operation and increased joint strength * Larger chromoly axle shaft * 35 percent larger bearing cages and races * Increased load capacity * 10 to 40 percent stronger the OE and competitor axles * Last up to 12 times longer * Precision-machined for precise OEM fitment * Black oxide coating with a matte finish that covers both joints for ultimate rust and corrosion protection * High performance molybdenum grease reduces heat and friction * Heavy-duty neoprene boots create a waterproof seal * Low-profile stainless steel clamps
( 1 )
$227.95
Clearance
Rugged ATV-UTV Parts universal joints are designed and built to directly replace and last longer than your OEM U-joints. They are made from high-quality alloy structural steel, precisely machined, injected with high-temperature lithium Complex 3 grease, and are fitted with a redesigned internal-style rubber bearing cap seal. Rugged ATV-UTV Parts universal joints are greaseable for long service life. Choose the U-joints designed for your off-road machine.
Not Yet Reviewed
$18.05
$12.50
On Sale
The Hill Killer gate plates by XDR replaces the reverse lock-out gate plate that comes standard for magnum grip ratchet shifter product. These gate plates are designed specifically to be a quick and easy change over intended for use as a safety device when attempting steep hill climbs. This is done by eliminating the reverse lock-out feature of the ratchet gate plate, ensuring quick shifts to reverse in an attempt to save the front end from going over backwards when climbing steep hills. The XDR gate plates are constructed of 304 stainless steel for durability and long life. Warning: It is not recommended to intentionally and/or repeatedly go from a forward gear to a reverse gear while moving for fear of personal safety, and to avoid potentially damaging drivetrain components of your vehicle.
Not Yet Reviewed
$65.95
$36.27
CV joints wear out because they are subjected to bouncing and because they are exposed to debris. EPI Performance CV joint kits are high-quality ATV, UTV, and snowmobile replacement parts developed from rigorous testing on the sand, mud, snow, and trails. Each kit includes the CV boot and joint, clamps, and grease.
Not Yet Reviewed
$72.99
Quadboss replacement axle shafts are made from high-strength 40CR chromium bar that's precision-machined to match OEM fitment specs. These axle shafts feature a laminate coating to resist rust and corrosion, as well as neoprene boots to create a waterproof seal. Order the model recommended for your ATV application.
Not Yet Reviewed
$151.31
—
$158.10
You require and Quadboss provides. Their differential bearing and seal kits have all that you need to service your model of ATV/UTV--leak-free seals and precision bearings.
Not Yet Reviewed
$157.13
Quadboss wheel and carrier bearing seal kits offer all of the bearings and seals you require to re-fit a wheel. Kits include: * High-speed bearings manufactured to ABEC 3 precision levels * 8 triple-lip rubber seals keep grease in and water/dirt out * Double-lip type TC seals with stainless steel garter springs
( 1 )
$88.26
Summit Bucks
All Balls Racing offers the most complete line of differential bearing and seal kits on the market! They're available for a wide range of ATVs from the 1980s and up. The kits feature premium high-speed bearings with low-drag, double-lip seals on both sides—to provide a superior exclusion of water and dirt, as well as improved grease retention. They contain everything that you need to rebuild a differential quickly and easily. Order the kit recommended for your application.
( 2 )
$100.93
—
$190.94
EPI Performance Sport Utility clutch kits are matched to your machine and your riding style to provide noticeable power gains! If you do a little bit of everything with your quad--trail riding, occasional mud and sand riding, plowing and hauling--you will find the "real-world" performance of these kits to be durable, reliable, and efficient. EPI Sport Utility kits deliver better low-end and midrange acceleration, along with quicker backshift for resulting crisp throttle responses. They reduce belt slip and heat; plus, they will make up for power loss and slow response when you mount bigger tires. Dial in your ATV/UTV clutches to your way of riding with these popular, all-around use Sport Utility kits from EPI.
( 2 )
$209.99
All Balls Racing complete 6-ball heavy-duty CV axles are designed and built as rugged OEM replacements with the current industry-standard of six ball bearings. They're engineered to handle the increasingly rough terrain and abuse you put your ATV/UTV through on a frequent basis. All Balls Racing complete 6-ball heavy-duty CV axles are static torsion and fatigue-tested, as well as built in facilities that are certified and meet the ISO 9001 quality manufacturing standard—providing you with peace of mind when you're out on the trail. Key features and benefits: * 6-ball bearing * Chromoly steel * Stronger than OEM * 30 percent stronger than the competition * 50 percent longer lasting than the competition * High performance molybdenum grease reduces heat and friction * Precision-machined for precise OEM fitment * Black laminate coating with a gloss finish to resist rust and corrosion * Heavy-duty neoprene boots create a waterproof seal * Low-profile stainless steel clamps
( 4 )
$180.45
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
