Availability
Showing In Stock Items. Show All 131 Items.
Ford Performance Parts high performance oil filters are designed and built for high performance use. They're available for a wide variety of applications. Features include: * Synthetic polymer/cellulose-fiber blend media * Heavy-gauge bases and canisters * Higher burst strength and fatigue resistance * High-quality silicone anti-drain back valves * Non-stick sealing gaskets * Long life with all motor oils * Up to 50 percent more filtering capacity than standard filters * Improved filtering efficiency
( 53 )
$22.99
To maximize filter performance, Moroso race oil filters have a filtration rating of 27 microns. This results in a maximum pressure drop of only 2.5 psi, which results in more flow, less oil bypass, and maximum filtration performance, which is so important in severe racing conditions. Made with roll-formed threads for a precise, tight fit, and with an anti-drainback valve to keep oil in the filter after engine shutdown, they are perfect for any race application.
( 75 )
$27.99
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 164 )
$24.99
Are you putting new cams in your engine? These Trick Flow® roller followers will help you get the job done right and get the most out of your cams. Featuring hardened steel construction, Trick Flow® roller followers are the perfect OE-style replacements for 4.6/5.4L 2V or 4V modular engines.
( 3 )
$31.99
As the crankshaft flexes, the balancer absorbs incredible amounts of energy. ARP balancer bolt kits will ensure that your balancer is locked into position. They feature a 12-point head that accepts a deep socket to eliminate the fear of stripping the head.
( 619 )
$28.99
—
$41.99
Fel-Pro headbolt kits contain a complete set of the highest quality headbolts and hardened washers available. They're cold-formed to ensure molecular integrity, then heat-treated prior to thread rolling and machining. Reduced-diameter bolt heads eliminate the need for valvetrain removal and facilitate cylinder head re-torquing. The bolts are available in a variety of head styles for fitment on specific vehicle and cylinder head applications.
( 216 )
$42.99
—
$47.99
PRW harmonic damper bolts help hold your balancer properly locked in place as they absorb the massive energy from crankshaft flexing. Professionally designed to withstand 180,000 psi fastener yield strength, they also include a wide-area 1/4 in. thick washer to further spread the fastening load. For installation ease, these bolts feature a deep-socket, 12-point head-style so your torque wrench stays fully engaged up to spec. Show your knuckles some mercy--complete your install with PRW harmonic damper bolts. Order the bolt recommended for your specific vehicle and engine size.
( 9 )
$20.04
Take up the slack with Dayco No Slack Idler pulleys. These specially formulated glass-filled polymer or steel-bodied pulleys have smoother surfaces and tighter dimensional tolerances for less vibration and longer belt life. They meet or exceed OEM specifications and feature lifetime-lubricated bearings and high-temperature seals to ensure peak bearing performance. Maximum structural integrity and optimal performance mean Dayco value for you. Keep your belts from slacking off with Dayco No Slack Idler pulleys.
( 80 )
$25.99
Dayco timing belt tensioners serve your engine quality performance and ensure long-lasting durability. They meet or exceed all OE specifications for your factory timing belt tensioners. They come with all instructions included to guide you on your way to a smooth installation.
( 1 )
$32.99
Melling manufactures the highest quality timing belt tensioners for reliability and performance. All Melling timing belt tensioners are designed to meet or exceed OEM specifications and stand up to the harshest automotive conditions.
( 6 )
$50.99
—
$51.99
Motorcraft oil filters are specifically designed for Ford, Lincoln, and Mercury vehicles. Each filter, including the popular Motorcraft FL-1A, uses as many as 12 high-quality components. Choose the style designed for fitment on your vehicle. Construction features include: * Steel cases: "Ironed" for a precise fit, fluted to ease removal, and painted for rust resistance * Pressure relief valve: When it's cold outside, or if the filters become clogged, oil flow through the filters can be reduced. If this happens, the relief valve opens to provide a continuous oil supply. Its design also minimizes the chance of contaminated oil recirculating back * Anti-drainback valve: This feature keeps oil in the filters to prevent "dry starts" after your engine has been turned off. It's made with specially formulated materials that resist the aging effects that an engine's heat can cause * Efficient filter media: Re-engineered media increases Motorcraft filters' dirt-collecting capabilities, allowing them to capture more engine-harming particles than ever before
( 133 )
$40.99
Built for passenger cars and light-duty trucks, Dayco Poly Rib serpentine belts are engineered for the high-mileage, demanding drives found in today's vehicles. Dayco's W Profile serpentine belts are the most innovative advancement in serpentine belt design in years. Developed through extensive laboratory and actual road testing, these unique rib profile EPDM belts have been engineered to conform to high-mileage, worn, or misaligned drives and to help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds that resist cracking and perform better in extreme temperature ranges, Dayco Poly Rib serpentine belts deliver more than just OE-required quality. They deliver the solution to troublesome drive problems.
( 181 )
$20.99
—
$32.99
Keep you camshaft properly secured with Ford Performance Parts camshaft bolts. They are made from quality materials and install in the factory location. Some are torque-to-yield design and must be replaced whenever they are removed.
( 8 )
$54.99
Flywheel bolts play a very important role in the performance and safety of race cars and street machines alike. That's why McLeod offers flywheel bolt kits that are far superior to OEM hardware, so you can bolt in your flywheel with confidence. McLeqod steel bolt kits offer increased strength and improved flywheel register.
( 9 )
$21.00
Melling rocker arms, available for both domestic and import applications, meet or exceed OEM specifications. Depending on the OE design specifications, Melling rocker arms are provided in either stamped or cast materials. Built from only the best materials and manufacturing processes available, they are perfect replacements priced right for your budget. Melling recommends installing new rocker arms with every engine rebuild to assure long engine life and efficient performance. Answer the little knock under your hood with replacement rocker arms from Melling--a supplier of quality engine parts.
( 72 )
$22.99
More and more manufacturers have shifted to aluminum bearings in their OE engines and Clevite AL-Series rod bearings are designed to be the highest-quality replacement bearings in the industry. They carry on the tradition and reputation that Clevite has built throughout the course of time. AL Series engine bearings feature a 100 percent lead-free aluminum silicon bi-metal material, which includes 60 percent more silicon than the leading competitor's bi-metal material for better conditioning of journal surfaces. These bi-metal bearings also offer greater wear resistance than the leading competitor's bi-metal material, as well as greater seizure resistance. Clevite AL-Series bearings feature 100 percent bored inside diameters for precision and surface characteristics and, where appropriate, straight-shell main bearings utilizing an "umbrella" groove that allows for superior oil control and improved pressure.
( 26 )
$26.99
When it's time to replace or upgrade the valves in your Trick Flow® cylinder heads, don't cut corners—turn to the company that originally made them. These replacement valves are the same high quality units used in Trick Flow® assembled heads. Features include stainless steel construction, swirl polishing, hardened tips, undercut stems, and dished heads (most applications). The valves install without any modifications and are available for all Trick Flow® cylinder heads.
( 37 )
$26.99
—
$27.99
These Trick Flow® cam bolts are designed for aftermarket and OE non-PI camshafts that require 12mm bolts. These cam bolts are made from quality-grade 10.9 steel with a black finish. These cam bolts are a great choice when installing aftermarket or non-PI camshafts.
( 11 )
$21.99
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 92 )
$20.99
—
$32.99
NTK engine variable valve timing solenoids are manufactured to meet the demands of today's VVT engines at both low and high rpms. The solenoids are individually tested to ensure consistent quality, with end of production tested in oil to ensure the valve is primed to work properly upon installation. Order the model recommended to fit your vehicle. Additional VVT solenoid features: * Manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage * High-strength thermoplastic for resistant to temperature, moisture and chemicals * Precision-wound, copper-coated windings help increase solenoid longevity * Hard-coated anodized spool valve prevents corrosion for lasting service
Not Yet Reviewed
$64.99
When rebuilding your Ford engine, you'll want to use the proper plugs and dowels for the job. These Ford Performance Parts Plug and Dowel kits include the necessary dowels, cup plugs, and pipe plugs for your rebuild.
( 8 )
$39.99
—
$47.99
Continental OE Technology Series Multi-V belts are factory-style replacements covering virtually all vehicle applications. These new straight-ribbed multi-V belts offer original fit and function that professional technicians appreciate for their customers. The serpentine belts are constructed with advanced EPDM rubber compounds that improve durability and deliver a quieter ride. They're available in well over a hundred lengths, with rib options ranging from three to 14. Order the model recommended for your car, truck, van, SUV, or crossover.
( 325 )
$21.99
—
$50.99
Continental replacement tensioner pulleys are direct replacements for the stock tensioners and are available for a variety of applications. All Continental replacement tensioner pulleys meet or exceed OEM specifications for all major car manufacturers.
( 9 )
$22.99
—
$40.99
Mahle Original fasteners deliver the clamping force necessary to seal the combustion chambers, as well as the oil and coolant passages--even at extreme temperatures and pressures. On your next cylinder head reassembly, use bolts designed to exact specifications for the best sealing solution--Mahle Original head bolt kits.
( 33 )
$52.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
