Availability
Showing In Stock Items. Show All 100 Items.
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 164 )
$14.99
—
$16.99
Melling replacement hydraulic lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit. They are affordable and available as flat or roller lifters.
( 37 )
$12.99
—
$18.99
Melling rocker arms, available for both domestic and import applications, meet or exceed OEM specifications. Depending on the OE design specifications, Melling rocker arms are provided in either stamped or cast materials. Built from only the best materials and manufacturing processes available, they are perfect replacements priced right for your budget. Melling recommends installing new rocker arms with every engine rebuild to assure long engine life and efficient performance. Answer the little knock under your hood with replacement rocker arms from Melling--a supplier of quality engine parts.
( 72 )
$16.99
—
$22.99
Get oil filtration that's as good as gold with K&N Performance Gold oil filters. Keep your engine free from contaminants as small as 10 microns. They use a resin-impregnated filter media to provide maximum filtering and an inner core to lend extra structural support to the filter, preventing filter collapse. Plus, many of these K&N oil filters have an anti-drainback valve (where applicable) that eliminates dry starts and prevents oil from draining back into the crankcase during engine shutdown. And they're protected by a heavy-duty outer shell that guards against rock and stone damage and provides over 550 psi hydrostatic burst strength. So, if you want golden-level oil protection, then you want K&N oil filters.
( 505 )
$15.99
—
$17.99
Are you putting new cams in your engine? These Trick Flow® roller followers will help you get the job done right and get the most out of your cams. Featuring hardened steel construction, Trick Flow® roller followers are the perfect OE-style replacements for 4.6/5.4L 2V or 4V modular engines.
( 3 )
$14.99
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 20 )
$17.99
Take up the slack with Dayco No Slack Idler pulleys. These specially formulated glass-filled polymer or steel-bodied pulleys have smoother surfaces and tighter dimensional tolerances for less vibration and longer belt life. They meet or exceed OEM specifications and feature lifetime-lubricated bearings and high-temperature seals to ensure peak bearing performance. Maximum structural integrity and optimal performance mean Dayco value for you. Keep your belts from slacking off with Dayco No Slack Idler pulleys.
( 80 )
$19.99
PRW harmonic damper bolts help hold your balancer properly locked in place as they absorb the massive energy from crankshaft flexing. Professionally designed to withstand 180,000 psi fastener yield strength, they also include a wide-area 1/4 in. thick washer to further spread the fastening load. For installation ease, these bolts feature a deep-socket, 12-point head-style so your torque wrench stays fully engaged up to spec. Show your knuckles some mercy--complete your install with PRW harmonic damper bolts. Order the bolt recommended for your specific vehicle and engine size.
( 9 )
$20.04
Sealed Power hydraulic lifters are precision-manufactured to maintain precise valve timing under all operating conditions. A patented constant orifice metering valve provides precise oil metering to the overhead valvetrain, and longer plungers or pistons provide increased bearing surfaces, resulting in longer lifter life. Their check valves are lightweight flat discs, allowing for higher speeds and more uniform operation than competitive lifters.
( 50 )
$11.99
—
$12.99
Built for passenger cars and light-duty trucks, Dayco Poly Rib serpentine belts are engineered for the high-mileage, demanding drives found in today's vehicles. Dayco's W Profile serpentine belts are the most innovative advancement in serpentine belt design in years. Developed through extensive laboratory and actual road testing, these unique rib profile EPDM belts have been engineered to conform to high-mileage, worn, or misaligned drives and to help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds that resist cracking and perform better in extreme temperature ranges, Dayco Poly Rib serpentine belts deliver more than just OE-required quality. They deliver the solution to troublesome drive problems.
( 181 )
$18.99
—
$20.99
Flywheel bolts play a very important role in the performance and safety of race cars and street machines alike. That's why McLeod offers flywheel bolt kits that are far superior to OEM hardware, so you can bolt in your flywheel with confidence. McLeqod steel bolt kits offer increased strength and improved flywheel register.
( 9 )
$21.00
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 285 )
$13.99
—
$17.99
These Trick Flow® cam bolts are designed for aftermarket and OE non-PI camshafts that require 12mm bolts. These cam bolts are made from quality-grade 10.9 steel with a black finish. These cam bolts are a great choice when installing aftermarket or non-PI camshafts.
( 11 )
$21.99
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 92 )
$20.99
—
$21.99
Fram Ultra oil filters are the best filters for consumers looking to get the most out of their investment in full synthetic oil. Drivers who are looking for top performance from their newer engines and maximum protection for older vehicles will find these to be the perfect filters at the perfect price. They feature the ultimate dual-layer synthetic media, providing up to 20,000 miles of engine protection. And, they trap and hold more than double the dirt of ordinary oil filter brands. You'll want to try Fram Ultra oil filters today!
( 9 )
$10.97
Take up the slack with Dayco No Slack Tensioner pulleys. These specially formulated glass-filled polymer or steel-bodied pulleys have smoother surfaces and tighter dimensional tolerances for less vibration and longer belt life. They meet or exceed OEM specifications and feature lifetime lubricated bearings and high-temperature seals to ensure peak bearing performance. Maximum structural integrity and optimal performance mean Dayco value for you. Keep your belts from slacking off with Dayco No Slack Tensioner pulleys.
( 20 )
$17.99
—
$22.99
PAC Racing 1200 Series valve springs are great as replacement parts--or for pushing above and beyond the performance of OEM engines. Select them when you're upgrading camshafts or doing engine rebuilds. The 1200 Series use a premium alloy that outperforms automotive industry standards; and PAC Racing processes the alloy to aerospace shot-peening standards to achieve superior fatigue dependability. This ensures that the springs maintain the load needed to withstand rigors of both street and mild racing applications.
( 20 )
$14.54
ACDelco Gold idler pulleys are built to offer reliable operation under severe conditions. They're dependable in any weather or climate offering, you year-round performance. Mounting hardware is included on some popular applications. These pulleys are manufactured to meet or exceed your expectations for fit, form and function. Order the model recommended for your vehicle.
( 13 )
$15.99
—
$18.99
K&N Select Oil Filters have been specially designed for professional installers and service providers. Their high-flow design can help to improve engine performance by reducing oil filter restriction. The filters have a fluted canister shape so they can be removed with a traditional oil filter wrench commonly available to commercial installers. These Select Oil Filters provide outstanding filtration and engine protection throughout their service life. They are engineered to handle all grades of synthetic, conventional, and blended motor oils. The pleated media provides high capacity, making them suitable for extended oil change intervals (when used in accordance with the vehicle and motor oil manufacturers' recommendation). K&N Select Oil Filters are available for canister and cartridge type oil filter applications. They're offered in a variety of heights, outside diameters, and thread sizes. Some models include a filter bypass relief valve and/or anti-drainback valve.
( 1 )
$10.99
Hayden automotive replacement idler pulleys will keep your drive belt on the right track. Hayden replacement idler pulleys are manufactured from quality materials to ensure performance and reliability. Available for most passenger cars, light trucks, and SUVs.
( 27 )
$11.99
—
$19.99
Pacific Performance Engineering MicroPure Extreme-Performance engine oil filters offer 2.5 times the filtration area of a conventional oil filter, providing the performance your engine oil needs to stay cleaner and for longer periods. Specially engineered synthetic filtration media achieves superior filtration to trap particles down to 5 microns, while a high-powered magnet secured at the bottom of the filter catches metal debris, preventing it from clogging the filter media and prolongs oil life. MicroPure's bypass valve is 10 psi stiffer than the OEM bypass valve and reduces the chance of dirty oil bypassing, and a heat-resistant silicone anti-drain-back valve retains the oil in the filter after the engine is turned off. With increased filtration area, four times finer media, and prolonged filter life, the PPE MicroPure Extreme-Performance filter is the ultimate choice for your engine. Additional features and notes: * 900 sq. in. of premium composite filtration media, a 150 percent increase over stock * Perforated metal core and spiral-wrapped adhesive secures filter media * 3/16 in.-16 UNF threaded baseplate with 47 percent larger passages * Direct replacement for the stock oil filter * High-power internal Neodymium magnet * 50 percent thicker base plate * Withstand 450 psi maximum burst pressure * TorqueStop feature to ensure a tight seal * Reinforced silicone anti-drain-back valve ensures a unidirectional flow
( 1 )
$14.39
Melling OEM replacement pushrods are perfect for stock rebuild or mild performance applications where open spring pressures do not exceed 300 lbs. They're manufactured from steel tubing and work well with factory or aftermarket rocker arms. These units are available in a wide range of lengths and other options for fitment on countless makes and models. When you're replacing your valvetrain components, trust Melling pushrods to keep your engine running smoothly.
( 73 )
$10.99
Lock the harmonic balancer onto the crankshaft with Dorman harmonic balancer bolts. They are made of high-quality steel for durability, securing your harmonic balancer tightly. Dorman is a leading supplier of original equipment automotive and heavy-duty replacement parts.
( 9 )
$12.95
—
$18.99
Sealed Power pin bushings will meet tough demands for wear resistance when added to a set of full floating connecting rods. These bronze bushings will work to reduce engine friction and keep things running smoothly.
( 9 )
$13.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
