Availability
Showing In Stock Items. Show All 560 Items.
Optima RedTop Starting 12-volt batteries are the ultimate power source for cars, trucks, SUVs, hot rods, and other high-performance vehicles. They're engineered with unique Spiralcell technology, delivering a stronger burst of ignition power, while extending the battery life up to three times longer than conventional models. Maintenance-free RedTop AGM batteries are sealed, leak-proof, and resistant to vibrations—so you can mount them anywhere and in virtually any position on your vehicle. Order the Optima battery designed for your application, and expect a perfect start every time.
( 1512 )
$279.99
Motive Gear master ring and pinion installation kits include everything that's in their regular differential kit—plus pinion shims, carrier shims, and ring gear bolts (where applicable). You also have the option of upgrading to higher quality bearings by adding "T" to the end of the part number on some models. Make a better choice for your ring and pinion installation with Motive Gear differential master bearing kits. Order the model designed for your vehicle application.
( 336 )
$105.99
—
$209.99
Rust, rocks, and road debris all take part in destroying differential covers—so Spicer Drivetrain Products introduces a line of axle-specific replacements. These kits include a new cover, plug, and installation bolts for an all-new look. They're available in a variety of materials and finishes for high strength and good looks. The differential covers are offered for the front or rear with select options for your particular application.
( 94 )
$139.99
—
$170.99
Powermaster PowerMax Plus starters are rated with high cranking torque and feature an offset gear reduction for increased performance. Their mounting blocks are made from durable billet aluminum and can be rotated in four positions to fit multiple locations. PowerMax Plus starters are available in either a natural or chrome finish and contain a tested dyno report in every box!
( 184 )
$166.99
—
$197.99
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Z17 Evolution Plus stock replacement brake kits have everything you need for an easy, bolt-on solution for your daily driver. They feature Z17 Evolution Plus ceramic pads and Autospecialty brake rotors, along with stainless steel hardware to get the job done right. If you need a complete, fast, and easy solution that meets original equipment standards, choose PowerStop's Z17 stock replacement kits to refresh your braking power.
( 756 )
$178.44
—
$237.90
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 310 )
$138.99
—
$219.99
Eliminate dry starts with one of these Melling prelube engine oilers, a must-have when building or maintaining an engine. These prelube engine oiler tanks hold fresh oil to prime your whole system, eliminating premature wear due to dry starts. They're compatible with virtually any make/model application. Trust Melling prelube engine oiler tank kits to help your engine start its life right.
( 6 )
$248.99
Manufacturer Rebate
MagnaFlow universal catalytic converters by Car Sound form the basic building blocks for many applications. The main benefit of universal catalytic converters is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting, and tube-bending equipment that is readily available to most professional installers. They are extremely well made, with features such as: * A ribbed body that minimizes expansion and distortion when the converter heats up. They form a channel that protects the cushioning mat from direct exposure to exhaust gasses, and hold the ceramic catalyst in proper alignment. * A 1/2 in. lap joint where the necks meet the body. The neck does not extend into the converter body, where it could hamper exhaust flow. * Manufactured with separate dies on different sized inlets. Putting larger neck sizes on smaller bodies would reduce the flow of the converter and the quality of the product. * A monolithic honeycomb catalyst. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. * Seam-welded close to the converter body for a strong, tight bond. Welding along the edge could allow the converter to expand like the folds in an accordion, allowing the catalyst to move around. * Heavier-gauge stainless steel, tip-to-tip. They do not use inferior mixed weights and materials. * An aluminized or stainless OEM-style ribbed heat shield that creates a rigid wall of protection against heat and adds to the structural stability of the converter.
( 186 )
$164.96
SPC Performance heavy-duty cam bolts replace your OEM cam bolts and allow for individual caster and/or camber adjustment. Available for passenger cars, 2WD and 4WD trucks, and SUVs, these SPC Performance heavy-duty cam bolts are sure to get your front-end alignment problems fixed.
( 21 )
$102.99
Completely do away with your vehicle's OEM IWE with RCV's Ultimate IWE eliminator sets that contain their ultimate 4340 sleeves. Simply remove the stock IWE and install these sleeves in their place. Once installed, your hubs become fully locked to the axle shafts allowing you to use the transfer case to shift in and out of 4WD. Confident in their design and strength, these gears come with RCV Performance's limited lifetime warranty against breakage! Select a set for your vehicle.
( 2 )
$199.95
Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.
( 38 )
$104.38
—
$112.40
Looking for the most aggressive sound in the Flowmaster muffler line? Then take a look at Flowmaster stainless steel 40 Series mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case. This improves both horsepower and fuel economy. Best of all, these mufflers allow you to hear that cool Flowmaster tone inside of the vehicle, as well as outside of it. So, if you want more power and less noise, then you need to acquire these Flowmaster stainless steel 40 Series mufflers.
( 57 )
$132.95
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 239 )
$194.96
On Sale
These Super 40 Flowmaster mufflers significantly outflow the older two-chamber mufflers. They help create even more horsepower with less interior noise and a deeper exterior sound. These mufflers feature a design patterned after Flowmaster's race mufflers. These Flowmaster mufflers far exceed older models on Dyno tests. They create a beautiful hot rod sound, along with increased horsepower and gas mileage. So, if you want to get that hot rod sound and add some horsepower, then these Flowmaster mufflers have you covered.
( 184 )
$149.95
Cloyes timing chain kits meet OE performance requirements. They utilize the latest in design and materials so you can enjoy quiet, maintenance-free performance. These assemblies are available in various styles, including link belt, single roller, and single non-roller. Order the kit designed for fitment on your specific model or engine application.
( 174 )
$183.99
Summit Racing™ offers Extreme Performance coated brake rotors for thousands of vehicles, from the 1960s and up. They're manufactured on CNC machines using CAD-CAM design for perfect balance and alignment, then coated with silver zinc to resist corrosion. These rotors provide you with maximum stopping power, reduced warping, and longer life. The cross-drilled holes and slots provide an exit route for gasses and dust, resulting in better heat dissipation and less brake fade under hard use. Other solid-surface rotors allow gasses to create a cushion between the pad and the brake rotor, resulting in poor brake performance. The cross-drilled holes and slots clear away harmful gasses, restoring full pad-to-rotor contact. These coated rotors are a terrific performance upgrade when replacing your brakes. Order the model recommended for fitment on your vehicle.
( 63 )
$169.98
Sonnax flanged yokes will complete your driveshaft connection. These high performance 6061-T6 aluminum parts are precision-machined to be stronger than the original cast steel yokes, as well as being lighter in weight. Sonnax builds these yokes for exceptional balance and superior craftsmanship, for a show-quality driveline.
( 22 )
$101.42
Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications. pMaxKote provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 10 )
$141.99
—
$201.99
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 133 )
$203.99
—
$217.99
Dee Zee universal round side steps add a rugged, stylish, off-road look to your truck or SUV. They're constructed from top-grade materials for durable strength and feature a molded plastic step pad for getting in and out of your truck or sport utility vehicle with ease. Their universal design fits most full size and midsize pickups and come available in your pick of stainless steel or steel tubing with chrome, black, or polished finishes.
( 15 )
$246.99
On Sale
Flowmaster Super 50 series muffler is a larger version of Flowmaster's famous 50 series mufflers, and designed for trucks and SUV's, it is also well suited to muscle car and high-performance applications. They are constructed of 16-gauge aluminized steel and fully MIG welded for maximum durability and feature a special tuning chamber that reduces interior resonance, while their larger case improves sound control and optimizes exhaust flow.
( 64 )
$199.95
WeatherTech seat protectors are the perfect accessory for owners needing protection for their front and rear vehicle seating. These seat protectors are made from a poly/cotton twill fabric with a durable water-repellent finish that will combat any juice box spill, cereal crumbs or pet mess! They also feature an extra-layer of nylon lining to further protect the covered seat(s). Additional features of WeatherTech seat protectors include: * Semi-custom to fit the size and type of most year 2000 vehicles * Fits most bench and bucket-style front and rear seats * Quick and easy installation, as well as easily removable for cleaning * Stays in place with durable straps, specialty inserts and a non-slip bottom * Seat protector is machine washable and reusable Please note: you must have a headrest on the seatback of your vehicle for the WeatherTech Seat Protector to strap on to. Also keep in mind, if your vehicle is equipped with a center seatbelt, it will not be accessible with installation of the seat protector.
( 13 )
$161.95
—
$201.95
These 70 Series Big Block II mufflers are designed around a large case for maximum volume and efficiency. They're 2 in. narrower than the original Big Block muffler, making them easier to install into tight areas. Other features include a mild, mellow exhaust tone and a resonant tuning chamber for reduced interior sound levels.
( 121 )
$243.95
SPC Performance ball joints are quality replacements for worn ball joints on your control arms. The ball joints are offered in a variety of configurations, and will work perfectly with SPC Performance control arm components. Order the SPC Performance ball joint suited to fit your application needs.
( 19 )
$222.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
