Availability
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 191 )
$119.99
—
$191.99
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 904 )
$251.99
—
$327.99
Magnuson supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. This technology recalibrates the engine and transmission control programs to work with the altered induction path and boost pressure of the supercharger. And that produces a seamless and consistent delivery of power over the entire rpm range--not just the high end! For you, that means Magnuson superchargers will boost your power output, and yet run like their factory installed units. Whether you're driving a Corvette or a Cadillac, a Silverado or a Hummer, or a Camaro or a Mustang, Magnuson supercharger kits deliver maximum performance!
( 12 )
$8,195.00
—
$8,995.00
HP Tuners Introduces VCM Suite MPVI4 Credit Pro packages, the latest evolution of their industry-leading OBDII interface. Built for professionals and enthusiasts alike, the computer programmers connect your vehicle to VCM Suite software (5.2+) for faster, smarter, and more powerful tuning and diagnostics than ever before. With upgraded hardware, expanded connectivity, and future-ready Wi-Fi capabilities, the MPVI4 redefines what's possible in performance calibration and data acquisition. Models are available with 0, 2, 4, 6, or 8 credits. HP Tuners VCM Suite MPVI4 Credit Pro packages feature: * Improved standalone logging: the most powerful device yet, capable of delivering standalone logging performance on par with VCM scanner and a wired connection * Upgraded hardware architecture: New internal processor for improved data throughput and flashing performance; 30x more memory than previous generation MPVI3 * High-speed USB-C connectivity: Faster, more reliable communication with your PC and vehicle * Bluetooth 5.2: Seamless wireless connection for scanning, logging, and TDN support * Wi-Fi ready (future update): Wireless VCM Suite connectivity coming soon * Enhanced storage and efficiency: Increased onboard memory for robust logging sessions * Improved OBDII fitment: A revised, tapered design means a more secure connection and better compatibility with even more makes/models * Built-In Pro feature set: Standard on every MPVI4, enabling standalone data logging and external sensor integration with PROLINK+ * RGB status LEDs: Clear visual indicators for power, connection, and activity status * Cross-Platform Compatibility: Works with VCM Suite (5.2+), TrackAddict, and RaceRender
( 1 )
$399.99
—
$799.91
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 353 )
$149.99
—
$202.99
On Sale
All cylinders, all the time! Get the most out of every mile with a Range Technology AFM/DFM Disabler Device. These modules allow your V6 or V8 GM vehicle to run in full cylinder mode at all times. This patented technology is the only product that will disable AFM or DFM without reprogramming the factory ECU. You get full power delivery all the time without factory warranty concerns. Additional features: * No more shuddering or dropping cylinders * Fast and easy setup; simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM or DFM system * No tools needed; simply remove to uninstall * All-terrain power and control in any situation—bad weather, off-road, and carrying heavy loads * Safe and reversible: leaves no trace; unplug it to return to factory settings * Fits all V6 and V8 General Motors AFM/DFM vehicles, including cars, trucks, and SUVs * Device is available in multiple color options
( 216 )
$259.95
$233.95
On Sale
GM performance fans will be geeked to learn about MSD's direct plug-in 2-Step launch controls for LS engines. These units are easy to install with factory-style connectors for a splice-free installation. When you're staged, you can hold the pedal to the floor, while the rpm stays at a consistent level, producing consistent launches.
( 86 )
$349.95
$314.95
On Sale
McLeod RXT Street Twin clutch kits are ideal for the extreme horsepower enthusiast who wants performance and economy. Capable of handling up to 1,000 hp, the RXT Street Twin clutches are for those who've kicked it up another notch—but still require streetability. The ceramic facing on the clutch discs provides slightly aggressive engagement with a soft pedal effort, making these clutches suitable for most street performance enthusiasts. Match your vehicle specs to the correct model from McLeod. Additional features include: * Alignment tool * Lighter-than-stock pedal feel * Available with dedicated flywheel or adapter ring for factory flywheel * CNC-machined and anodized flywheel adapter ring * Smooth engagement with excellent release qualities * Ceramic facings on disc increase holding power over similar organic linings * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 47 )
$995.00
—
$1,795.00
$895.50
—
$1,615.50
On Sale
Intended for high-horsepower street fans, the McLeod RST Street Twin clutch kits are economically priced twin disc clutches that use your existing flywheel. Able to handle up to 800 hp, the RST Street Twin clutches remain completely street-drivable. The organic lined clutch discs provide smooth engagement with a soft pedal effort, making these clutch kits ideal for the street performance enthusiast. (For select vehicles where these clutches are not adaptable to your existing flywheel, a new flywheel is included in the kit.) Here are some additional features of the McLeod RST Street Twin clutch kits: * Alignment tool included * Lighter-than-stock pedal feel * Will bolt to factory flywheel * CNC-machined and anodized flywheel adapter ring * Organic disc facing for smooth and even clutch engagement with excellent release qualities * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 84 )
$825.00
—
$1,379.00
$742.50
—
$1,241.10
Summit Bucks
ACDelco offers rear main seal housings for a wide range of year/make and engine applications. The one-piece aluminum replacements are designed, engineered, tested, and backed by General Motors. They are validated OE parts for specific Chevrolet, Buick, GMC, and Cadillac vehicles. These components are designed to give the engine oil leak protection from between the crankshaft output flange and the engine block. Order the engine crankshaft seal housing recommended for your ride.
( 8 )
$64.99
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 370 )
$42.99
—
$306.99
Injector Dynamics ID1050x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1000 and X Series, these injectors are a drastic improvement over previous series from Injector Dynamics. Order the set recommended for your vehicle. Features include: * Requires only 8 V for consistent operation at 8 bar * Corrosion resistance makes them compatible with all automotive fuels * Compact bodies allow fitment in over 200 applications * Improved internal flow path—without sacrificing low flow performance * Stronger magnetic circuit offers stable operation up to 10 bar * Replaceable inlet filter extends service life
( 8 )
$1,075.20
Nick Williams Performance drive-by-wire throttle bodies are precision CNC-machined from billet aluminum to meet the demands for increased airflow on the drive-by-wire LSX and LTX performance engines. These throttle bodies require an aftermarket intake to fit the larger diameter throttle blade. They use a 6-pin late model connector that works with late model wiring harnesses. Tuning is required for installation; and the Nick Williams Performance drive-by-wire throttle bodies come complete with stepper motor and electronics installed. There is no need to disassemble your factory throttle body. Order the model designed for your vehicle and engine application.
( 21 )
$690.00
—
$715.00
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 136 )
$121.99
—
$152.99
The engineers at FAST teamed up with the airflow specialists at RHS to develop a 3-piece, polymer intake manifold. They are constructed from a proprietary advanced polymer material that offers a host of benefits over aluminum aftermarket intakes, including lighter weight and improved strength and heat dissipating characteristics. While they feature a 102mm air inlet that is perfectly suited to the FAST Big Mouth 102mm throttle body, they can also be used with stock or aftermarket 90mm or 92mm throttle bodies. Other features include integrated nitrous bungs and perfect bolt-on fitment that allows for the use of factory accessories without modifications or clearance concerns. FAST LSXR intake manifolds' 3-piece modular design allows for easy disassembly and porting. This new design gives you the ability to remove individual runners from the manifold for modification.
( 26 )
$1,210.95
—
$1,255.95
On Sale
DiabloSport PredatorX tuners deliver the latest in tuning technology, allowing you to take control of your tuning needs from your smartphone. The iOS/Android compatible apps pair with the PredatorX dongle to give you complete tuning access from your pocket. The OBDII dongle can stay connected to the vehicle full time, so you're always just seconds away from being able to make tuning changes. The tuners are preloaded with power adding tunes for multiple octane levels, as well as transmission tunes for applications where they are needed. For those seeking more than the provided tunes offer, there is a plethora of end user based parameters that can be adjusted. Speed limiter, tire size, timing and fueling at wide-open-throttle, rev limiters, idle speed and so much more can be adjusted through the PredatorX. Features: iOS and Android support Tune from your smartphone! Preloaded with Performance tunes Trucks get tunes for 87 octane and Premium fuel Performance cars get tunes for 91 and 93 octane fuel TCM tunes are included End user adjustable parameters Disable AFM! Calibrate Speedometer for Taller Tires Set axle ratio if you've swapped gears Remove Speed Limiter Adjust Idle Speed Raise Rev Limiters Live data monitoring Read/Clear Diagnostic Trouble Codes (DTCs) Adjust options like idle, speed limiters, rev limiters, tire size, gear ratios and more. Support for 07-18 GM gas trucks and SUVs, 05-19 Corvette, and 10-24 Camaro V8, and more!
( 14 )
$295.95
$266.35
ATI Super Damper Serpentine Series harmonic balancers are patented and feature grooves for serpentine belts machined into the outer damper shell. The dampers come with six outer grooves for standard OEM drive systems—but eight and 10 grooves are available for supercharger or turbo applications. Serpentine dampers are offered in a variety of diameters, and crank hubs may be fitted with a 6-groove serpentine pulley to drive external oil pumps or vehicle accessories. The Serpentine Series Super Dampers fit all ATI GM-front crank hubs and can be adapted to many engine combinations, providing maximum flexibility. They're available in steel or lightweight, hardcoated aluminum. Features and benefits: * Eliminates torsional crankshaft vibrations * Exceeds SFI 18.1 specs * Black zinc chromate finished * Tunable, rebuildable, and extremely efficient at all rpms * Laser-engraved 360 degree timing marks
( 238 )
$449.12
—
$578.28
Red Line created the industry of pushing bubbles out of the way to ensure cooling with their Water Wetter cooling system treatment. It's a unique agent for cooling systems that doubles the wetting ability of water. It offers rust and corrosion protection that allows for use of straight water in racing or reduced antifreeze levels in warm climates. It also improves heat transfer and reduces cylinder head temperature. Help your engine keep its cool with Red Line Water Wetter cooling system treatment. Instructions and specs: * Use 1 bottle for most passenger cars and light trucks—treats 3 to 5 gallons or 13.2 to 15.9 liters * Use 2 bottles with larger cooling systems * Use 1 oz. (3 to 4 capfuls) per quart for small cooling systems * Compatible with new or used antifreeze (including those with DEX-COOL and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems * Satisfies ASTM D2570 and ASTM D1384 corrosion tests for glycol-based antifreezes * Contains no ethylene glycol
( 169 )
$13.30
If you're running headers with close tolerances or have an engine bay with little room, Summit Racing™ ceramic ignition wire sets are the cure for burnt and melting boots. Their ceramic coating acts as a heat mirror, reflecting infrared energy and heat away from the plug boot—and it's engineered to resist flaking and peeling. The 8mm spiral core silicone wires deliver maximum energy to the spark plugs with built-in RFI suppression for your street-driven vehicle. These affordably priced wire sets are true performance upgrade replacements for OE types. They're available (assembled or non-assembled) with different terminal and boot ends for fitment on a range of vehicle applications.
( 90 )
$127.99
—
$134.99
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 643 )
$499.95
$448.95
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 19 )
$24.99
—
$54.99
Summit Bucks
ACDelco GM Genuine Parts fuel injection throttle bodies are GM-recommended replacements for your vehicle's original component. It is located on the intake manifold, and contains the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. These true OE fuel injection throttle bodies have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 40 )
$249.99
Summit Bucks
ACDelco GM Genuine Parts Iridium spark plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They are ACDelco's latest in spark plug technology and an exact replacement for your GM vehicle's original components. Iridium composition provides a high melting point and great strength, along with excellent wear resistance and durability. ACDelco GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles.
( 154 )
$8.99
—
$9.99
Summit Bucks
The chain of command between a crankshaft, camshaft, and engine valves is central to your vehicle's basic movement—which is why it's so important to protect the timing belt. Fel-Pro timing cover gaskets provide a tight seal to keep contaminants out of the gear shaft area. They're offered in hundreds of single or multi-piece sets for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs; gaskets for industrial use are also available. Ideal for stock replacement (not intended for racing applications), Fel-Pro gaskets are made from materials such as fiber, cork, and rubber. Choose the kit which corresponds to your year/make and engine application.
( 547 )
$6.99
—
$44.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
