Availability
Showing In Stock Items. Show All 275 Items.
The legacy continues … and now it is bigger, better, and faster! Built for enthusiasts and professionals, MPV13 is the fastest most sophisticated OBDII interface device to date, and Pro is the new standard. Take advantage of Pro Feature Set capabilities, like standalone data logging and PROLINK+ compatibility (sold separately) already built in. MPVI3 redefines the limits of speed and control with faster standalone data logging and two times the storage capacity compared to the previous generation. Log more runs (faster) and store more calibrations on your MPVI3, all with the convenience of eliminating your laptop from the equation. HP Tuners VCM Suite MPVI3 Credit Pro packages equip you with the most inclusive scanning, logging, and calibration, making them the only tool you need in your toolbox. The MPVI3 connects your vehicle's control modules to HP Tuners' VCM Suite software. You can run complete diagnostics, monitor vehicle performance, read from various vehicle control modules, and more in VCM Suite. Optimize your performance, fuel economy, or whatever your vehicle goals may be in VCM Editor with a multitude of defined parameters. When you are ready, license and tune any vehicle currently supported by HP Tuners with the fastest read and write speeds available. Connect, read, edit, write, drive; HP Tuners VCM Suite MPVI3 Credit Pro packages are offered with or without tuning credits.
( 52 )
$599.95
—
$799.91
Nick Williams Performance drive-by-wire throttle bodies are precision CNC-machined from billet aluminum to meet the demands for increased airflow on the drive-by-wire LSX and LTX performance engines. These throttle bodies require an aftermarket intake to fit the larger diameter throttle blade. They use a 6-pin late model connector that works with late model wiring harnesses. Tuning is required for installation; and the Nick Williams Performance drive-by-wire throttle bodies come complete with stepper motor and electronics installed. There is no need to disassemble your factory throttle body. Order the model designed for your vehicle and engine application.
( 20 )
$690.00
—
$715.00
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 619 )
$549.95
—
$599.95
Intended for high-horsepower street fans, the McLeod RST Street Twin clutch kits are economically priced twin disc clutches that use your existing flywheel. Able to handle up to 800 hp, the RST Street Twin clutches remain completely street-drivable. The organic lined clutch discs provide smooth engagement with a soft pedal effort, making these clutch kits ideal for the street performance enthusiast. (For select vehicles where these clutches are not adaptable to your existing flywheel, a new flywheel is included in the kit.) Here are some additional features of the McLeod RST Street Twin clutch kits: * Alignment tool included * Lighter-than-stock pedal feel * Will bolt to factory flywheel * CNC-machined and anodized flywheel adapter ring * Organic disc facing for smooth and even clutch engagement with excellent release qualities * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 83 )
$825.00
DeatschWerks fuels your passion for performance with fuel injectors specifically designed and engineered for your Sport Compact, Modern Muscle, and European vehicles. DeatschWerks fuel injectors are manufactured to fit your OE harness, fuel rail, and manifold. Because they are application-specific, you'll spend less time installing and tuning, so you can spend more time enjoying the increased performance of your ride! They provide an excellent spray pattern and atomization for optimized idle and tuning. Each set is flow-matched both statically and dynamically, and flow-balanced to within one to two percent. A flow report is included with each set of DeatschWerks fuel injectors.
( 66 )
$519.00
—
$799.00
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 493 )
$799.99
You have asked, and Baer has answered! Baer is bringing back the original Baer Claw brake system that started it all, with the introduction of their Classic Series disc brake kits. They are direct bolt-ons for early GM, Ford, and Mopar applications. Front kits feature aluminum 2-piston, pad-guided calipers and vented 11 in. rotors, while the rear kits feature cast iron single-piston calipers and solid 10.5 in. rotors for maximum clearance on small wheel applications. You want to modernize your early muscle car, fit stock wheels, have easy access to replacement parts, and not break the bank. Baer Classic Series brake kits are your answer! Features include: * Red powdercoated calipers * Braided brake hoses * Slotted and drilled rotors
( 35 )
$649.95
Summit Racing™ drive-by-wire throttle bodies are a perfect upgrade for any late model LS/LSX engine. They're precision-machined from 6061 billet aluminum and come in multiple finishes. The unique blade design allows these throttle bodies to bolt right up to any factory or aftermarket LS/LSX intake manifold—and they utilize the original late model GM 6-pin connector. Their larger bore size allows for increased airflow, which results in fast, smooth acceleration across all RPM ranges. The proprietary electronics and stepper motor allow these throttle bodies to be used on both naturally aspirated and forced induction engines. Tuning is required for installation.
( 7 )
$601.99
—
$621.99
DiabloSport Trinity 2 EX Platinum Performance programmers are game-changers! Trinity (T2) EX units are extremely capable performance tuners and feature-packed monitor/data logger devices—offering the best of both worlds. They feature an impressive, high-resolution 5 in. capacitive touchscreen, full swipe functionality, and industry-leading gauge designs; plus, jaw-dropping power potential and a powerful, yet simple user interface. DiabloSport Trinity 2 EX Platinum Performance programmers feature: * Full-color, high-definition 5 in. touchscreen * Lightning fast read/write times * Performance tuning for mileage, towing, daily driving, and performance * One-Touch, easy menu navigation * Full data-logging capability * Read and clear diagnostic trouble codes * Multi-vehicle licenses available * Correct speedometer and adjust speed/rev limiters (Options, features and coverage may vary, based on vehicle application) * AFM/MDS active fuel management options (Options, features and coverage may vary, based on vehicle application)
( 32 )
$710.95
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Z26 Street Warrior brake upgrade kits are recommended for high performance, high-horsepower muscle and modified cars. These kits come with everything you need for an easy installation, including pads, rotors and stainless steel hardware. The drilled and slotted rotors and carbon fiber ceramic pads combine to provide shorter stops under the most demanding conditions. PowerStop's Z26 Street Warrior kits are affordable bolt-on upgrades that deliver the braking power you need to rein in all those ponies, and with their low-dust and noise-free formula, you'll spend less time cleaning your wheels and more time enjoying what matters most--the drive.
( 754 )
$587.01
—
$665.95
Chevrolet Performance offers these clutch kits for many GM applications. Each kit is a direct replacement for the factory original and includes a pressure plate and clutch disc.
( 12 )
$549.99
COMP Cams introduces another industry first with their Max-Lift BSR shaft rocker systems, a bolt-in bushed shaft rocker system that increases valve train stiffness helping your engine achieve higher levels of performance. By tying all eight rocker arms together on a single shaft that fits in the stock rocker stand, COMP Cams has found a way to improve valve train dynamics, increase valve train stiffness and reduce deflection under extreme loads. The increased valve train stiffness created the BSR rocker system allows your existing cam to act like a larger camshaft by transferring more of the motion to the valve or the use of more aggressive, higher lift cams without losing control of the valve train. Take complete control of your valves with the COMP Cams Max-Lift BSR shaft rocker system.
( 3 )
$774.95
RideTech RidePro-HP Ride Height sensor kits upgrade your existing RidePro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of RidePro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. RideTech complete RidePro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses
( 1 )
$525.00
Granatelli Motor Sports Malevolent coil packs deliver nearly twice the voltage as the competition. Rated at up to 85,000 V, these nasty little units not only increase power to your plugs, but improve fuel economy, throttle response, and idle characteristics. Malevolent coil packs are bred of a one-piece design that offers you a direct OEM replacement with simple plug-and-play installation—and they won't void your factory warranty! Increase your engine efficiency with improved combustion, powered-up though the intense-performing Granatelli Motor Sports Malevolent coil packs. Order the individual pack or set recommended for your vehicle and engine application.
( 15 )
$775.05
—
$775.06
COMP Cams Sportsman solid roller lifters feature premium-quality, high-value components designed for sportsman and professional racing, along with high-end street machines. They're available in both needle-bearing and bushing configurations. Each design features two pressurized EDM oil feeds, as well as an edge-orifice feed to the wheel. This delivers a more reliable oil feed than most competing options. COMP Cams Sportsman solid roller lifters are also designed with a shallower oil band than competitors' versions for increased strength and rigidity, while internal machining helps to reduce weight. The body utilizes a skirted wheel that strengthens the lifter ears, and the skirt also provides more contact area with the lifter bore for further lifter stabilization. In addition, staked axles eliminate clips and provide robust axle retention. This feature increases the stiffness of the lifter ears and helps to prevent the ears from spreading. The COMP Cams Sportsman solid roller lifters are built from 8620 premium steel for increased strength and wear resistance and they feature a captured, stainless steel link bar design. The lifters also utilize a tapered and slotted link bar tower for reduced weight and improved aesthetics. Choose the size and options tailored for your engine application.
( 9 )
$888.95
Chevrolet Performance EFI intake manifolds are ideal stock replacements for your worn or faulty original. These multi-port injection models are made from factory-style materials to OE specifications—for a proper fit and flawless performance. Order the manifold recommended for your vehicle application.
Not Yet Reviewed
$622.99
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 800 )
$565.95
Installed behind the rear axle, Borla ATAK axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (rear section) performance exhausts are less restrictive than factory exhaust systems. Welded tips are standard on most systems. ATAK (Acoustically Tuned Applied Kinetics) technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK-equipped exhaust systems deliver the highest available dB (decibel) levels in the Borla street-legal lineup. Unlike inferior brands that lose significant sound quality at higher volumes, ATAK systems are tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. They are calibrated on a vehicle-by-vehicle basis and their specifically-tuned internal muffler cores deliver the most desirable sound. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla ATAK axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla ATAK axle-back exhaust systems with the power of race-winning Borla Multicore technology.
( 155 )
$667.99
—
$806.99
Set the cruise and enjoy the ride with Dakota Digital direct plug-in cruise control kits for GM LS drive-by-wire engines. They plug directly into your OEM LS throttle pedal for a simple, reliable installation. They utilize CAN-bus data and are compatible with aftermarket control switch applications. They come supplied with your choice of a switch/turn signal level, as well as an output for a cruise-on indicator, and inputs for your existing brake light switch, ground, and power.
( 12 )
$532.00
DeatschWerks DW300 X2 Series fuel pump modules include accommodation for pumps, integration of a return fuel line, and retention of all the functionality of OE module. The DW X2 Series modules consist of a top-hat, center section, and OE lower bucket. These components work together to deliver the flow you need and the functionality you want. Choose the model designed for your vehicle.
Not Yet Reviewed
$799.00
Shorty headers from BBK will help your vehicle produce an extra 8 to 15 hp. Constructed from mandrel-bent steel tubing with 3/8 in. thick die-stamped flanges, the exhaust units are available in tube diameters to fit a variety of engine sizes. (Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer; this includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc.) If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment.
( 298 )
$549.99
BMR Xtreme anti-roll bars feature a massive diameter and include heavy-duty rod ends. These sway bars have an easy bolt-on design with the option to be welded, if desired. The factory rear sway bar works well for handling, but falls short when it comes to drag racing. There are two main reasons for this—the OE bar diameters are nowhere near the right diameter to control torque loading on a launch, and the OE-type bar only attaches at the control arms with no frame attachment points. This allows for too much body separation and no way to control it. By attaching the end links to the frame, body separation is minimized and converted into forward momentum. This, combined with the large diameter bar's ability to better control torque loading, creates more consistent and predictable launches and better 60 ft. times. BMR Xtreme anti-roll bars come with all necessary Grade 8 mounting hardware.
( 26 )
$579.95
Edelbrock fuel injectors offer precise, controlled fuel flow for better power, throttle response, and economy. They are available in a number of designs to fit the various Edelbrock fuel injection systems, as well as a wide range of fuel flow rates.
( 14 )
$610.95
Trick Flow® high-performance flow-matched fuel injectors feature all stainless-steel internals that provide industry-leading atomization and spray patterns, with linear flow at very low pulse widths. Trick Flow’s precision dynamic flow-matched injectors provide more consistent fuel delivery to each cylinder, resulting in reduced emissions, optimized power production, and safer engine operation when pushing the limits of performance. Just don’t take Trick Flow’s® word for it. The results have been verified by multiple USA-based third-party testing labs to ensure consistent results on a variety of test benches. Full characterization data is available to ensure a drop-in, no hassle tuning experience with your stock or standalone ECU. Other notable features include: • 100 percent precision dynamic flow-matched across a range of pulse widths • Unsurpassed balance across a broad range of flow rates • High impedance design • Ultra-compact EV14-style bodies • USCAR connectors • Drop-in, no hassle installation • 8- to 18-volt operating range • 100 psi maximum operating pressure • Full characterization data available for programming stock and/or standalone ECUs • Compatible with gasoline, methanol, and E85 fuels • Sold in matched sets only
Not Yet Reviewed
$574.99
—
$849.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
