Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
2009 Parts and Accessories
Showing In Stock Items. Show All 158 Items.
On Sale
Roush Replacement Air Filters
If you need to replace your Roush Performance intake air filter, one of these replacement air filters is the ticket. These cotton gauze filters are reusable direct replacements designed for use with your Roush Performance air intake.
( 30 )
$99.00
$89.10
On Sale
Crown Automotive Axle Bearings
Crown Automotive offers a wide selection of axle bearings to meet your application needs. They have bearings for the front and rear that will keep your axles spinning without resistance. Whether you need just a bearing or a complete bearing and seal kit, Crown Automotive has the quality choices to get your project revolving.
( 32 )
$70.99
$63.89
On Sale
Crown Automotive Fuel Injectors
Crown Automotive fuel injectors supply optimum fuel efficiency for your engine. These quality components deliver maximum spraying action to give your ride the power it needs when it needs it most. The units are available for a wide range of vehicles—including many Jeep and Mopar family models. Give your vehicle a "shot" at peak performance with Crown Automotive fuel injectors.
( 4 )
$99.99
$89.99
On Sale
SLP Performance Shotgun Race Resonators
These SLP Performance Shotgun race resonators will give your exhaust system maximum flexibility. They are manufactured from high-quality 304 stainless steel and are hand polished. Their small 4 in. diameter will allow them to fit underneath the chassis of your vehicle for increased ground clearance. The SLP Performance Shotgun race resonators feature the classic SLP logo embossed on the case--perfect for showing off to your friends who's the leader in exhaust performance.
( 27 )
$94.99
$85.49
On Sale
Crown Automotive Manual Transmission Input Bearing Retainers
Crown Automotive manual transmission input bearing retainers are heavy-duty steel retainers built to replace parts, which are prone to suffer oil starvation at slightly deficient oil levels. Retainers often get worn or damaged due to being in constant motion any time the engine is running. Worn or defective retainers may create excessive noise, which continues as long as the engine runs. A severely worn input shaft bearing can cause the transmission to slip out of gear while moving. So, don't wait; go with Crown and travel with peace of mind.
( 6 )
$99.99
$89.99
On Sale
Crown Automotive Drag Links
Crown Automotive drag links and tie rod assemblies are quality replacement parts to eliminate play in your steering wheel. Jeeps are made to be driven hard, and that can take a toll on your steering components. Trust your Jeep to Crown, a leading manufacturer of quality OE parts.
( 18 )
$60.99
—
$108.99
$54.89
—
$98.09
On Sale
RAM Hydraulic Bearing Feed Line Kits
Ram hydraulic bearing feed line kits will help you achieve faster engagement and release times. They are compatible with late model V8 Ford Mustang and Chevy Camaro models. These kits include -3 AN of braided stainless steel line 36 in., crimped hose ends, and adapters for stock master and slave cylinders.
( 2 )
$78.00
$70.20
On Sale
Earl's Performance LS Water Pump Adapters
Earl's leads the way for LS engines! OE water pumps come with push-on barbs for clamping the standard radiator hoses. Push-on hose connections just don't meet the demands of extreme performance. Earl's LS water pump adapter kits convert both the inlet and outlet to -20 AN fittings. The kits work with all LS water pumps; an O-ring adapter plate is included that upgrades early LS water pumps to the later, less restrictive style of thermostat. Features include: * Billet aluminum and stainless steel components * Anodized protection on aluminum components * Requires thermostat upgrade on early LS water pumps * Welding required
Not Yet Reviewed
$163.95
$93.17
On Sale
Artec Industries Lower Control Arm Brackets
Mount your lower control arms using heavy-duty replacement brackets from Artec Industries. They're made from 1/4 in. in. thick steel plate for strength and have grease fitting access on top to allow easy maintenance of your joint. The brackets have a 2.625 in. mounting width with 9/16 in. bolt hole for common sized style cartridge joints. The skid plate on the bottom of each bracket wraps around the joint, protecting it from direct impact and decreasing premature wear; this skid plate design does not restrict movement of the joint. Tapered sides allow the Artec lower control arm brackets to be mounted at an angle on the frame without excess material hanging off the side. Choose the style needed to mount front or rear control arms on your specific vehicle.
( 13 )
$76.99
$65.44
On Sale
Crown Automotive Exhaust Manifolds
Are you in search of a manifold that's the right fit at the right price? Look no further than Crown Automotive exhaust manifolds. They're constructed out of high-quality materials, while providing you with the correct replacement for your worn-out factory unit. Crown Automotive equips you with a durable, leak-free design that grants you a longer-lasting service life. The right exhaust manifold presents your vehicle with several benefits, such as increased gas mileage and reduced drive pressure and underhood noise.
( 24 )
$65.99
—
$90.99
$59.39
—
$81.89
On Sale
Crown Automotive Driveshaft Yokes
You're just about to conquer a tough, rocky, tire-dropping section of trail when, "BAM!"—the U-joint grenades and takes out an ear on the yoke. Thankfully, you came prepared with Crown Automotive driveshaft yokes so you can make the repair and keep on riding. These yokes are designed and built to OEM specs for excellent fit and reliable performance. Whether you are hot rodding on the street or on a trail ride, always be prepared with Crown Automotive yokes.
( 30 )
$63.99
$57.59
On Sale
Crown Automotive Automatic Transmission Cooler Lines
Crown Automotive offers automatic transmission cooler lines for a wide range of vehicles, including Jeep and Dodge models from the 1990s and up. These replacements are made from original materials and factory specs to ensure a proper fit and optimum performance. The lines connect various points, facilitating coolant flow and protecting key components under the hood.
( 3 )
$66.99
—
$91.99
$60.29
—
$82.79
On Sale
aFe Scorcher High-Performance Ignition Coils
aFe Power offers Scorcher high performance ignition coils for a wide range of cars, trucks, and vans—including models by Chrysler, Dodge, Jeep, Ram, BMW, Cadillac, Chevrolet, GMC, Ford, Lincoln, Lexus, Scion, Toyota, Audi and Volkswagen from 2000 and up. These premium coils are a direct replacement upgrade over your stock originals. They feature a lower primary resistance than factory coils, resulting in a high energy spark that ensures complete combustion from idle to redline. Scorcher ignition coils keep pace with the demands of higher RPM ranges and at wide-open throttle, always delivering the peak performance you expect. Order the model recommended for your vehicle. Additional details: * Up to 20 percent more spark energy * Increase horsepower and torque * Improved drivability and smoother idle * Easier cold starts * Longer coil life * Available individually or in a set of 4, 6, or 8
( 4 )
$58.00
—
$88.00
$53.65
—
$81.40
On Sale
RAM Flywheel Bolts
Ram flywheel bolts are just what the doctor ordered to connect your flywheel to your engine. They have a black oxide finish to help resist rust and corrosion, and include the washers needed for a quick and safe installation.
( 7 )
$56.00
—
$75.00
$50.40
—
$67.50
On Sale
Crown Automotive Brake Master Cylinders
Whether you're flying down the highway, cruising around town, or crawling down a mountain, life takes on a terrorizing side when you lose your brakes. Crown Automotive brake master cylinders are designed just like the originals for easy installation and brake line attachment. Master cylinders and brake lines should be periodically inspected and replaced for best overall safety. When you hit the brakes and the pedal goes to the floor the results can be catastrophic. Remember to be safe out there with Crown Automotive brake master cylinders.
( 10 )
$73.99
—
$108.99
$66.59
—
$98.09
On Sale
Crown Automotive Brake Caliper Brackets
Brake maintenance is serious! Crown Automotive brake caliper brackets are replacement parts for when your originals begin to fail due to damage or stress cracking. These steel mounting brackets are designed to withstand the rigors of hard use and offer a long life span. They're available in multiple finishes and are application-specific to ensure proper fit and function.
( 4 )
$103.99
$93.59
On Sale
aFe Pro Dry S Air Filter Elements
If your vehicle spends the majority of its time on the street, and you desire to maximize airflow, then aFe Pro Dry S air filter elements are your best bet. These synthetic oil-less filters feature multiple layers of progressive media for optimum filtration and flow, even when dirty. The filters bump seals eliminate the need for sealants or gaskets since they conform to the filter housings and always return to their original form. Full 360-degree urethane frames allow proper OE fitment and strength. These air filter elements are available in a variety of styles and sizes for countless applications. For more airflow, and less mess, order the air filter element for your application needs.
( 125 )
$60.00
—
$114.00
$51.00
—
$96.90
On Sale
RSO Suspension Sway Bar End Links
Upgrade your suspensions geometry with sway bar end links from RSO Suspension. These links will prevent unwanted axle housing contact. They are designed to eliminate loss of motion with high-quality factory-style bushings and help to maintain sway bar balance for increased handling performance and comfort. RSO Suspension's sway bar end links are constructed using tension free rod ends and zinc plating that offer the best in corrosion resistance and smooth operation on or off-road. Select the sway bar end links recommended for your make/model. Product features and details: * Vehicle-specific fitment ensures that the part is right for your vehicle with variable length design adapt to your lift * Accurately set your sway bar operating angle correcting geometry on lifted vehicles while improving performance both on- and off-road * Tension-free rod ends reduce wear and strain, special zinc plating applied for corrosion resistance and long lasting protection * Maintain sway bar balance for predictable handling while factory-style bushings eliminate loss of motion * Backed by a limited lifetime manufacturer warranty on the workmanship/structure, 5-years on the components, and 1-year on the finish/coating
( 2 )
$76.99
$69.29
On Sale
Crown Automotive Track Bars
How far would you make it if the axle walked out from under your vehicle? Crown Automotive track bars work in conjunction with the springs to locate the axles under your Jeep. They help keep everything lined up, even during suspension travel. These steel bars mimic the OE units in dimensions and are easy bolt-on replacements. Crown Automotive track bars will help keep your axle where it belongs.
( 9 )
$63.99
—
$92.99
$57.59
—
$83.69
On Sale
Artec Industries Inner C Gussets
Artec Industries inner C gussets are designed to take serious abuse while reinforcing your front inner C's. They're precision-machined from 1/4 in. thick steel and pre-formed to fit. The heavy-duty design of these gussets provides valuable stability to areas prone to flex during high abuse conditions. Order the brackets recommended for your specific application.
( 6 )
$102.29
$86.95
On Sale
Summit Racing™ Loaded Strut Assemblies
Buick, Chevy, Chrysler, or Dodge—whatever type of vehicle you drive, Summit Racing™ has just the right suspension components, including these loaded strut assemblies. They're application-engineered to your vehicle's unique riding and handling characteristics for better suspension performance. Hundreds of models are available, for fitment on vehicles from the 1980s and up. Summit Racing™ loaded strut assembly features: * Twin-tube, nitrogen-charged design for better performance * Consistent robotic TIG welds * High-range -45 to +450 degree grease applied to all bearings * Strut rod nuts are torqued to OE specs and retain the OE spring compression * Phosphate finished and painted for corrosion resistance * Chrome plated pistons for added life * Neoprene strut boots included * Rubber seat and bumper meet or exceed OEM specifications * High-quality NOK seals * Every unit is put through a 300,000-cycle durability test
( 277 )
$89.99
—
$108.99
$80.99
—
$98.09
On Sale
ACCEL Super Coils
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 806 )
$86.95
—
$122.95
$50.70
—
$80.45
On Sale
Crown Automotive Harmonic Balancers
Counter vibrations with Crown Automotive harmonic balancers. With these dampers attached, destructive torsional vibrations will be reduced, and this will help extend the life of your crankshaft. Crown has a selection of OE-fitting replacements made of iron and powdercoated. There is a lot of power and torque produced under the hood of your vehicle and Crown Automotive harmonic balancers will keep it all safely under control.
( 23 )
$56.99
—
$77.99
$51.29
—
$70.19
On Sale
Crown Automotive Automatic Transmission Shift Solenoids
Crown Automotive automatic transmission shift solenoids will efficiently control the flow of transmission fluid and restore smooth gear changes. Covering Jeep, Chrysler, and Dodge vehicles, they are built from quality materials and with fit and function just like the originals. No hardware is included; reuse existing hardware.
Not Yet Reviewed
$69.99
$62.99
