Availability
Delphi mass airflow sensors are the OE parts that your vehicle should have come with! Their MAF sensors are new, not remanufactured, and feature fast response for outstanding performance over a wide range of ambient temperatures. Delphi mass airflow sensors are engineered to provide your ECM with continuous, precise information to ensure optimal performance, fuel economy, and reduced emissions. Give your vehicle new life--replace worn OE parts with Delphi mass airflow sensors.
( 100 )
$56.99
—
$322.99
Delphi ignition coils will definitely spark a response! Precise spark timing offers increased fuel economy and faster crank-to-run. These coils provide accurate electrical energy to create a voltage potential at the spark plug—and that provides you with superior engine performance, better control over emissions, and fuel economy. You'll get the OE performance, durability, and electromagnetic capacity level that your vehicle requires with Delphi ignition coils. Order the model designed for your vehicle application.
( 79 )
$19.99
—
$177.99
These Delphi camshaft position sensors feature a digital output design for maximum signal to noise ratio. They are not impacted by temperature changes and provide long-lasting sensor protection. These Delphi camshaft position sensors are also manufactured to meet or exceed OE requirements to ensure quality and long-lasting durability.
( 13 )
$11.99
—
$150.99
Add Delphi fuel injection idle air control valves to control the airflow into your engine. Delphi OE replacement valves provide a superior fit and finish that result in an easier installation for you. Their idle air control valves meet federal emissions regulations, increase your fuel efficiency, and eliminate the potential for malfunctions. Get control over the amount of air allowed to flow into your engine, and your engine idle speed, in a variety of load conditions when you replace your air control valves with Delphi fuel injection idle air control valves.
( 36 )
$48.99
—
$109.99
Delphi engine crankshaft position sensors exceed OE requirements and undergo certified electrical testing. They feature enhanced sensing functionality that delivers reduced emission, improved reliability, and superior drivability. Delphi engine crankshaft position sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. Choose Delphi for the OE replacement parts that your car was born with.
( 16 )
$11.99
—
$121.99
Clearance
Delphi fuel pump module assemblies are nickel plated with all-steel internal components. They feature internal guide rod springs and external rubber feet for enhanced stability and reduced noise from vibration. These fuel pumps have little flow or pressure variation in hot fuel situations. Delphi fuel pump modules are designed to be OE replacements.
( 256 )
$114.99
—
$1,351.99
Malfunctioning MAP sensors can often cause problems, such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and even poor engine performance. So, if yours is in need of replacement, do it with Delphi MAP sensors. These MAP sensors provide precise measurements of manifold absolute pressure. They are designed to perform in harsh environments, such as extreme temperatures, vibration, thermal and mechanical shock, and chemical contamination. Safeguard your engine with these quality MAP sensor components from Delphi.
( 20 )
$20.99
—
$318.99
Delphi fuel injectors are engineered with an accurate, controlled spray pattern that reduces emissions and improves cold-start capabilities. These replacement injectors have a recessed fuel exit and no internal seal rings—in order to minimize leakage and possible puddling. Delphi fuel injectors are durable, dependable, and offered for a wide variety of applications. Order the OEM stock replacements designed for your vehicle.
( 9 )
$36.99
—
$582.99
Delphi engine coolant temperature sensors are top-quality, direct fit OE replacements, which are designed to eliminate connection and failure points. With a one-piece, lead-frame design from the sensing tip to the connector terminals, these units equip your vehicle with a proven design that's built to last. They put the engine under fuel control operation quicker and reduce harmful cold-start emissions by 40 to 50 percent. Delphi engine coolant temperature sensors are built to last, even under the toughest conditions, to endure the long haul. Improve reliability, durability and fuel economy with Delphi.
( 17 )
$8.99
—
$48.99
Delphi air charge temperature sensors offer a durable OE replacement you can rely on! Built with the latest OE technology, these sensors are a one-piece design that eliminates internal connectors and failure points for more reliable service. Delphi temperature sensors have rugged plastic shells and thermistor pre-mold subassemblies or brass. Plus, they eliminate electrical interference. Get accurate readings--replace your original equipment with Delphi air charge temperature sensors.
( 2 )
$10.99
—
$69.99
Delphi ignition knock sensors maximize your engine's performance--regardless of fuel quality! Their knock sensors hear various knock frequencies under many operating conditions to detect shifts and provide an accurate signal to your engine control module. The sensors meet or exceed OE requirements and reduce potential damage to your internal engine components. Knock, knock-- who's there? Engine. Engine who? Engine gonna buy me a Delphi ignition knock sensor? Listen to your engine--choose Delphi.
( 31 )
$14.99
—
$84.99
Delphi oxygen sensors will help you get your car up and running in no time. The engineers at Delphi designed these oxygen sensors to use OEM connectors and threads for easy installation in your car. Their unique sensor coating resists contamination to create oxygen sensors that are long-lasting and reliable. Whether you are replacing your exhaust and just want a new sensor or are replacing a worn-out unit, these Delphi oxygen sensors are for you.
( 44 )
$35.99
—
$292.99
Delphi vehicle speed sensors offer an accurate, clean signal input to your vehicle's ECM. Their designed digital output gives the maximum signal to noise ratio and they will maintain optimal performance during drastic temperature changes for robust, long-lasting sensor protection due to their single-element design. Delphi vehicle speed sensors provide quality materials, extended life, improved reliability, and superior drivability.
Not Yet Reviewed
$14.99
—
$173.99
Delphi suspension stabilizer bar end links enhance your ride-quality and control. These OE replacements are built and tested to the extreme for the correct performance and long-lasting service on your vehicle. Delphi parts withstand temperatures below -40 degrees C, over 120 degrees C, and are exposed to 720 hours of salt spray. Utilizing their extensive dimensional and material analysis ensures Delphi stabilizer bar links provide the best compatibility between OE and aftermarket.
( 10 )
$4.99
—
$44.99
These Delphi fuel pump strainers are designed to keep dirt, dust, and other particles out of your fuel pump and away from your fuel system. They are manufactured from quality materials and install easily in the factory location.
( 12 )
$6.99
—
$26.99
Delphi offers suspension coil spring seats/insulators for a wide range of applications. These standard replacements undergo extensive dimensional and material analysis to ensure the very best compatibility to the OE part. They're tested for 250,000 cycles to check braking force, cornering force, and suspension travel movement. The aftermarket parts are exposed to 720 hours of salt spray for optimum protection against corrosion, and feature an additional cataphoretic coating for enhanced aesthetics and greater protection against corrosion. Delphi suspension coil spring seats/insulators can withstand temperatures from -40 to 248 degrees F. Order the model recommended for your vehicle.
Not Yet Reviewed
$8.99
—
$35.99
Replace worn suspension parts to improve safety and ride comfort. Delphi control arms utilize robotic welding for consistent performance and quality. Build from materials such as steel and cast iron, the arms are available in a variety of styles—including stock, stamped, and forged. Anti-corrosion protection is applied to each part to ensure longevity. Rubber or rubber/steel bushings are included with most models. Order the OE-type replacement specified for your vehicle application.
( 13 )
$9.99
—
$320.99
Delphi control arm bushings are designed, engineered, and manufactured to OE-quality standards. With safety and cost-effectiveness in mind, they use only the highest quality materials, balancing precise quantities of steel and rubber for optimum strength, flexibility, and noise reduction tailored to the application they are to fit. Through a rigorous cleaning process, a strong chemical bonding, and extensive fatigue testing, Delphi control arm bushings will supply your vehicle with a comfortable, quiet ride, as well as improved stability and safety.
Not Yet Reviewed
$3.99
—
$81.99
Delphi fuel tank sending units provide correct gas gauge readings. These sending units feature empty float height and float retention to exact OE specifications. Delphi builds them with internal springs for increased durability and enhanced stability to prevent tube chafing, and gold-filled fuel level sensors that provide improved resistance to sulfur corrosion and heat. Plus, their lower amperage draws less load on your vehicle's electrical system. With their more than 50 years of OE experience in fuel handling systems, shouldn't you trust your vehicle to the accuracy of Delphi fuel tank sending units?
( 1 )
$58.99
—
$342.99
Delphi air conditioning compressors meet and exceed OE specifications and your own expectations. Constructed with high-quality, corrosion-resistant aluminum alloy, these compressors offer high pumping capacity to cool your passenger compartment quickly—and a low torque demand to maximize your fuel economy. Delphi A/C compressors have a proven clutch design for more clutch life and less squeak. Plus, they contain a full-system charge of oil and (where applicable) O-rings/sealing washers, making installation a breeze! For an OE-exact fit that won't disappoint, choose a replacement conditioning compressor from Delphi.
( 6 )
$339.99
—
$588.99
Delphi steering pitman arms are designed with safety and precise fitment in mind. They're tested to the extreme for OE performance at every turn, withstanding temperatures below -40 degrees C and over 120 degrees C—as well as exposure to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensure the very best compatibility between the factory and aftermarket part. These durable steel pitman arms are available for a wide range of vehicle-specific applications.
( 2 )
$23.99
—
$60.99
Delphi ball joints can make the difference between safely getting where you're going and a really bad day. These joints are used extensively for many OE and aftermarket steering systems. They're thoroughly tested in extreme temperatures, put through 720 hours of wicked salt spray, and driven over various terrains, ensuring top quality. Delphi ball joints use exacting dimensions and top-quality materials to ensure longevity and safety for all of your valuable cargo.
( 19 )
$8.99
—
$129.99
Delphi ABS wheel speed sensors meet your OE requirements and those of your wallet. Delphi speed sensors provide accurate, clean signal input to your vehicle's ECM. Designed for the maximum signal to noise ratio, these ABS wheel speed sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. When it's time to replace, choose Delphi ABS wheel speed sensors for reliability and superior drivability.
( 1 )
$12.99
—
$207.99
Delphi fuel lift pumps won't let you down. These quality lift pumps will provide the right volume of fuel from your tank to feed your fuel injection pump. Maintain smooth power and performance with Delphi fuel lift pumps.
( 7 )
$62.99
—
$292.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
