Availability
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 90 )
$1,849.95
—
$1,899.95
AMP Research PowerSteps are full length automatic electric-powered running boards that instantly extend when you open your door, and then hide themselves safely out of sight when the doors close for improved ground clearance, aerodynamics, and appearance. And their attractive design and legendary reliable, all-weather performance sets a new industry standard. Features include: * High-strength, diecast aluminum-alloy linkage arms, anodized and PTFE coated to resist corrosion * Precision, zero-maintenance stainless-steel pivot pins * Extruded aluminum steps with a textured powdercoated finish for maximum grip and durability * Weatherproof, OEM-quality electric motors and wiring harness with sealed weathertight connectors * AMP-designed electronic controller employs pressure-sensitive, pinch-proof safety technology * Integrated LED light system (standard) * 600 lbs. load capacity (each side)
( 83 )
$1,599.99
—
$1,799.99
Diesel trucks are designed for towing heavy loads. If your rig is running 500 to 650 hp, then Valair Performance Quiet Street Dual Disc clutch kits are the way to tow. They feature tough heavy-duty parts, strong pressure plates, and a nodular iron flywheel. These kits are not intended for racing or competition use. Quiet clutch kits eliminate floater plate rattle when the clutch is pressed in, but gear rollover noise is inevitable when changing to a solid mass flywheel. It's often heard when the vehicle is under load at low rpm or idling, and it sounds like marbles in the transmission. Please educate yourself before purchase. Towing is tough on your vehicle—keep the pressure high and the shifts solid with a Valair Performance Quiet Street Dual Disc clutch kit, available for a variety of specific transmission applications.
( 9 )
$1,713.16
Gain powerful sound, better performance, and improved mileage with a set of Stainless Works performance headers. Constructed from high-quality 304L stainless steel, the headers are CNC mandrel-bent and have durable 3/8 in. thick flanges. They're available to fit the factory connection point, or attach to a custom Stainless Works cat-back exhaust. Order the style you prefer and the model designed for your year/make and engine application.
( 30 )
$1,705.25
—
$1,709.05
Building on the features that make the GenX® 255 for GM LS3 great—like 12° valve angles and relocated valves for reduced valve shrouding and improved piston-to-valve clearance—Trick Flow's GenX® 280 cylinder heads withstand the abuse of high horsepower, power-adder performance demanded by today's racers and engine builders. The GenX® 280 heads list of features is long, and it starts with your choice of a HIP'd (Hot Isostatic Pressed) or standard casting. This process significantly increases the casting's density for improved tensile and fatigue strength. It continues with industry leading airflow through CNC Competition Ported 280cc intake ports and Trick-Alloy™ powdered metal valve guides for added longevity. Manley Severe Duty intake valves and your choice of Extreme Duty Inconel or Severe Duty Stainless Steel exhaust valves are designed to withstand the abuse of extreme temperatures and stresses of big power adder applications. Trick Flow® by PAC Racing dual valve springs, titanium retainers, .750-inch thick deck, and 6-bolt-per-cylinder mounting pattern round out the features. Trick Flow® GenX® 280 cylinder heads for GM LS3 work with all LS3 intake manifolds and LS9/LSA blower assemblies and fit all LS head gasket and engine block combinations. These cylinder heads are available fully assembled or as bare castings. Sold individually. Key features: * 280cc intake ports and 67cc combustion chambers * Choice of HIP'd or standard casting * Accepts 3/8 in. pushrods * Powdered metal valve guides * 2.165 in. NK-844 severe duty stainless steel intake valves * 1.600 in. extreme duty Inconel or severe duty stainless steel exhaust valves * .750 in. thick deck * 6-bolt configuration * Assembled heads include a Trick Flow® LS3 rocker stand
Not Yet Reviewed
$1,749.99
—
$1,949.99
South Bend Clutch Dyna Max street dual disc clutch kits are offered for a range of applications and setups. These clutch kits are made using high performance materials and include everything you need for your clutch installation. Many kits include Kevlar® pilot bushings. When it comes to street performance, you can count on South Bend for top-quality components.
( 79 )
$1,769.82
South Bend Clutch Dyna Max organic feramic clutch kits are manufactured with performance organic and feramic friction materials, which provide moderate clutch engagement. The Dyna Max organic clutch feramic kits by South Bend Clutch are durable and reliable. They come with the necessary parts you need to do the job—and many kits include Kevlar® pilot bushings. These kits are available for a variety of clutch styles and applications, with or without the flywheels. Select the kit best suited for your application needs.
( 23 )
$1,537.72
Trick Flow® GenX® 260 square port cylinder heads for GM LS7 are the best choice for your LS-based performance build for several reasons. The A356-T6 aluminum castings feature more material for increased rigidity and strength. Factory LS7 port locations, valve angles, and valve locations have been maintained to work with existing intakes and pistons. One-piece modular, 2024-T4 billet aluminum rocker arm mounts enhance valvetrain stability and are removable for shaft rocker setups. High flow, high velocity CNC Competition Ported runners with the premium high resolution surface finish provide all-out air flow and performance throughout the entire powerband. Plus there's clearance for 3/8" pushrods and through-deck coolant holes that fit all GM LS gasket and block combinations, Trick-Alloy™ powdered metal valve guides, and solid stem valves. Fully assembled heads also include Trick Flow® by PAC Racing Pacaloy valve springs, steel or titanium spring retainers, die forged steel valve locks, and stainless steel valves. Trick Flow® GenX® 260 cylinder heads are emissions-legal under CARB E.O. D-747 for 2006 to present GM vehicles with 7.0L engines. They are available fully assembled or as bare castings and sold individually.
( 2 )
$1,524.99
—
$1,599.99
Trick Flow® Twisted Wedge® Track Heat® 185 series cylinder heads are the best aftermarket heads for Ford 2V Modular engines with power adders and/or high rpm applications. The heads feature CNC-profiled Twisted Wedge combustion chambers and intake valves moved to the opposite side of the cam. These features provide dramatic increases in mid-lift airflow, piston-to-valve clearance, and valve-to-bore clearance for using higher lift cams and larger valves without altering bore size or flycutting pistons. Other exclusive features include Fast As Cast® runners that deliver near-CNC-ported airflow, OE PI-style intake inlets, patented replaceable cam bearing journals (no more junking heads because of trashed cams!), 3/4" thick decks, and 3/4"-reach spark plugs. Trick Flow Twisted Wedge Track Heat 185 heads fit all 2V Romeo and Windsor engines and accept all OE-style camshafts, followers, lash adjusters, valve covers, and most OE Ford front covers. The heads are available fully assembled or as bare castings. Sold individually.
( 7 )
$1,649.99
—
$1,699.99
Trick Flow® Twisted Wedge® 185 Series cylinder heads are the best aftermarket heads for mildly modified Ford 2V Modular engines. The heads feature Twisted Wedge combustion chambers and intake valves moved to the opposite side of the cam. These features provide dramatic increases in mid-lift airflow, piston-to-valve clearance, and valve-to-bore clearance for using higher lift cams and larger valves without altering bore size or flycutting pistons. Other exclusive features include Fast As Cast® runners that deliver near-CNC-ported airflow, CNC-profiled combustion chambers, OE PI-style intake inlets, patented replaceable cam bearing journals (no more junking heads because of bad cam bearings!), 3/4" thick decks, and 3/4"-reach spark plugs. Trick Flow Twisted Wedge 185 heads fit all 2V Romeo and Windsor engines and accept all OE-style camshafts, followers, lash adjusters, valve covers, and most OE Ford front covers. The heads are available fully assembled or as bare castings. Sold individually.
( 3 )
$1,599.99
March Performance Chevy LS Series serpentine kits offer an exciting new look when mounting an accessory drive in your vehicle. They're designed for vehicles that do not have air conditioning. The driver side features a remote power steering pump with an attractive aluminum cover, while the passenger side has March's own billet alternator (except where noted). An OEM-style tensioner ensures perfect belt tension. All pulleys and brackets are CNC-machined from 6061-T6 aluminum for strength and perfect fit—and hard-coated on high wear areas for durability. Order the kit recommended for your vehicle. LS Series kits include: * Aluminum water pump * March billet alternator (except where noted) * Alternator pulley with fan * Water pump pulley with nose cover * Alternator bracket * Polished spring-loaded belt tensioner with cover * Crank pulley (required adapter sold separately) * Mounting hardware Kits with power steering include: * Type 2 remote power steering pump * Billet pump case * Power steering pulley with nose cover * Mounting hardware
( 1 )
$1,694.99
Injector Dynamics ID1300x fuel injectors are high-flow models with characteristics specific to the needs of motorsport tuners. You get superior flow without sacrificing idle and cruising performance in low fuel demand situations. This perfect balance between reliability and performance makes the 1300x Series one of the most popular options in today's motorsports. These injectors not only work with gasoline, but any ethanol fuels your engine is tuned for. The stainless internals prevent corrosion, add durability, and provide dependable flow in high performance engines. Order the ID1300x fuel injectors recommended for your vehicle.
( 1 )
$1,873.20
—
$1,890.00
Chevrolet Performance has taken the hassle out of transmission installation. Clutch kits are available on their own, or with other key components you need to complete the job more easily. Choose the kit that's appropriate for your particular transmission—and experience a faster installation utilizing the quality Chevrolet Performance parts included.
( 2 )
$1,713.45
Fleece Performance Cheetah Holset turbochargers are 100 percent drop-in, bolt-on, and enjoy big top-end power units. These turbos provide quick and smooth throttle response, lower EGT's, and stock-like spooling with 40 to 45 psi operating range. They use a high-flow turbine wheel and Fleece's 63mm billet compressor wheel in order to support up to 650 rwhp. Give your diesel truck the kind of bolt-on performance most vehicles only dream of—with Fleece Performance Cheetah Holset turbochargers!
( 3 )
$1,847.50
Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque
( 9 )
$1,572.50
—
$1,912.50
Edelbrock Performer RPM Chrysler Gen III HEMI cylinder heads are bolt-on performance upgrades for Gen III HEMI engines. They are designed to fit with the stock intake manifold, exhaust manifold, valve cover, rockers, spark plugs, and accessories, as well as Hellcat components. The cylinder heads have been machined to be used on either the driver or passenger side of the block. They are cast from A356 aluminum and are heat-treated to T6 specifications. Edelbrock Performer RPM Chrysler Gen III HEMI cylinder heads feature fully CNC-machined combustion chambers, along with CNC-profiled bowls and port entries/exits for improved airflow. They also feature more material in the deck and reinforced combustion chambers for increased cylinder pressures. The rocker bosses have been reinforced for improved stability and strength, and extra material has been added around the intake and exhaust ports to allow for porting in racing applications. Both the intake and exhaust port flanges have remained in the factory location for use with OEM components. The intake and exhaust valves have been tipped away from the bore wall to unshroud the larger valves, while maintaining factory geometry. The seat diameters have also been increased for improved heat transfer and durability over stock.
( 3 )
$1,611.50
—
$1,639.50
Borla S-Type II axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type II axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies often associated with resonance or drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type II axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type II axle-back exhaust systems.
( 25 )
$1,653.99
—
$1,736.99
Installed behind the rear axle, Borla ATAK axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (rear section) performance exhausts are less restrictive than factory exhaust systems. Welded tips are standard on most systems. ATAK (Acoustically Tuned Applied Kinetics) technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK-equipped exhaust systems deliver the highest available dB (decibel) levels in the Borla street-legal lineup. Unlike inferior brands that lose significant sound quality at higher volumes, ATAK systems are tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. They are calibrated on a vehicle-by-vehicle basis and their specifically-tuned internal muffler cores deliver the most desirable sound. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla ATAK axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla ATAK axle-back exhaust systems with the power of race-winning Borla Multicore technology.
( 156 )
$1,617.99
—
$1,923.99
Oliver Speedway Series connecting rods are designed for severe applications where engines are subject to high-rpm endurance racing or high loads over a wide variation in rpm. These rods are often used in large cubic inch late model dirt cars and forced-induction applications. All Oliver rods are precision-machined using only premium mill-certified aircraft quality E4340 chromoly alloy, heat-treated to produce a 100 percent martensite grain structure. The I-beam connecting rods feature an exclusive "Parabolic Beam" design that reduces beam stress and delivers the highest strength-to-weight ratio of any connecting rod currently made. Oliver Speedway Series connecting rods provide quality craftsmanship, materials, and processes to deliver the ultimate durability and strength—allowing you to push the limits. Order the length needed for your vehicle and engine application.
( 6 )
$1,599.97
—
$1,666.00
Intended for the high horsepower street/strip fan, McLeod RXT 1200 twin disc clutch kits are able to handle 1,200 crank horsepower. With a higher clamp load than standard RXT twin disc clutch kits, RXT 1200 clutch kits can handle almost any horsepower you can throw at them and still remain streetable. Ceramic-lined clutch discs provide smooth engagement with a stock-like pedal feel to make them ideal for the street performance enthusiast. A flat-style flywheel with a crank relief of 6.250 in. diameter or less is required for proper fitment.
( 12 )
$1,599.00
—
$1,795.00
Summit Racing™ Turbocharger Hot Side combo kits provide premium components and accessories, carefully matched, to successfully reach your power and performance target. Each of our combos contain BTR multi-layer header gaskets, an ARP chromoly header bolt kit, and Precision Turbo and Engine turbocharger gaskets, along with a Summit Racing™ Pro LS turbo manifold and wastegate. Completing each combo will be one of our Summit performance turbochargers or a VS Racing turbocharger. Choose the combo best suited to your power needs. Contents and features: * BTR LS multi-layer steel gasket * ARP chromoly head bolts--12-point, rated at 170,000 psi to handle severe conditions * Precision Turbo and Engine turbocharger gaskets—stainless steel, provides a positive leak-free seal in high-temperature situations * Summit Pro LS turbo manifold—universal, 304 cast stainless steel, T4 flange, designed to handle the heat and horsepower * Summit wastegate--stainless steel base and 6061 aluminum cap with black anodized finish * VS Racing turbochargers with T4 housing * Summit 2600 or 2700 Series performance turbochargers--T4 turbine housings--true race turbos offering the latest in compressor aero technology with quick-spooling and free-flowing turbines specially designed, balanced, and precision assembled with 2618 billet forged compressor wheels for class leading racers.
( 2 )
$1,537.32
—
$1,607.32
Pedders' renowned expertise plus advanced technology equals XA Extreme coilover kits that let you click, tune, and play! These height-adjustable coilover shocks are built to Pedders' stringent quality standards. They feature sports-calibrated tunable damping, motorsports coil springs individually tuned to suit each application, and a host of other high performance features—including engineered mounting bracketry. Plus, shocks have a 30-position adjustable bump and rebound damping setting which offers a fine-tuned suspension that's ready to play with just a click of a button. For the performance enthusiast, Pedders XA Extreme coilover kits are a great fit. Order the kit designed for your vehicle application.
( 13 )
$1,529.96
DeWitts Pro-Series direct-fit radiator modules install in the stock mounting position and use the factory connections without any modifications or adapters. Expertly assembled and then furnace-brazed, their epoxy-free cores feature two rows of 1.00 inch cooling tubes and a serpentine fin. The radiators' press-formed end tanks are manually TIG-welded by skilled craftsmen to provide the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch; some models also have a built-in transmission cooler. DeWitts Pro-Series direct-fit radiator modules are available in crossflow and downflow styles, as well as a range of sizes for vehicle-specific applications.
( 41 )
$1,589.99
—
$1,642.99
Wilwood AERO6-DM direct mount truck brake kits were designed for the specific purpose of providing big capacity braking with large diameter rotors for heavy weight and extreme duty vehicles. For trucks and SUV's, it provides big stopping power for towing, off-road, and enhanced braking with wheel and tire upgrades. The kits provide better hold while crawling and more thermal capacity for high-demand off-road and highway use, including towing, hauling, and commercial applications. These kits are engineered for direct mounting on Chevy, Ford, Jeep, and Toyota trucks, SUVs, and 4x4s. Forged aluminum AERO6-DM six-piston calipers deliver increased clamping force and are compatible with OEM rear brakes, master cylinder, and computer systems. The premium grade, long-grain carbon iron alloy rotors substantially increase braking performance with fade-resistant Wilwood performance brake pads. These kits fit in most 17 in. and larger wheels. Order the model designed to fit your application.
( 6 )
$1,755.59
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
