Availability
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 191 )
$119.99
—
$191.99
Instant Rebate
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 499 )
$649.99
—
$789.99
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 898 )
$251.99
—
$327.99
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1959 )
$118.95
All cylinders, all the time! Get the most out of every mile with a Range Technology AFM/DFM Disabler Device. These modules allow your V6 or V8 GM vehicle to run in full cylinder mode at all times. This patented technology is the only product that will disable AFM or DFM without reprogramming the factory ECU. You get full power delivery all the time without factory warranty concerns. Additional features: * No more shuddering or dropping cylinders * Fast and easy setup; simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM or DFM system * No tools needed; simply remove to uninstall * All-terrain power and control in any situation—bad weather, off-road, and carrying heavy loads * Safe and reversible: leaves no trace; unplug it to return to factory settings * Fits all V6 and V8 General Motors AFM/DFM vehicles, including cars, trucks, and SUVs * Device is available in multiple color options
( 214 )
$259.95
You don't have to sacrifice safety or quality to save money; our affordable Summit Racing™ bracket racer SFI dampers have been spin-tested to 12,500 rpm and carry an SFI-18.1 rating. The carbon steel dampers have an injection-molded and bonded elastomer, easy-to-read engraved timing marks, removable counterweights (where applicable), and a highly polished baked-enamel finish, so they look as good as they perform.
( 389 )
$228.99
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 352 )
$149.99
—
$202.99
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 369 )
$42.99
—
$306.99
Lares new (not remanufactured) power steering pumps are engineered to OE specifications to ensure proper fit, form, and function. They're manufactured from the same high-quality materials as your original components to provide long-lasting performance. Over a hundred models are available, with or without an included reservoir, for vehicle and engine applications from 1960 and up. Order the replacement pump recommended for your ride.
( 134 )
$117.50
—
$170.99
Yukon Gear & Axle Dura Grip positraction carriers offer great traction and strength, and yet are not overly aggressive for the streets. These nodular iron or steel replacements are 4-spring, Raybestos composite, clutch-style, limited-slip carriers—with internal gears machined from forged 4320 steel with stronger teeth. Assembled in the USA, the Yukon differential carriers are rebuildable, allowing for repairs or modifications without buying a new unit. They're available for fitment with nearly two dozen axle models. What are you using to transfer power? Choose smooth operation with strong lockup abilities to transfer torque—benchmarks of the Yukon Gear & Axle Dura Grip positraction carriers.
( 136 )
$394.00
—
$538.00
The engineers at FAST teamed up with the airflow specialists at RHS to develop a 3-piece, polymer intake manifold. They are constructed from a proprietary advanced polymer material that offers a host of benefits over aluminum aftermarket intakes, including lighter weight and improved strength and heat dissipating characteristics. While they feature a 102mm air inlet that is perfectly suited to the FAST Big Mouth 102mm throttle body, they can also be used with stock or aftermarket 90mm or 92mm throttle bodies. Other features include integrated nitrous bungs and perfect bolt-on fitment that allows for the use of factory accessories without modifications or clearance concerns. FAST LSXR intake manifolds' 3-piece modular design allows for easy disassembly and porting. This new design gives you the ability to remove individual runners from the manifold for modification.
( 26 )
$450.95
—
$1,210.95
Summit Bucks
ACDelco offers rear main seal housings for a wide range of year/make and engine applications. The one-piece aluminum replacements are designed, engineered, tested, and backed by General Motors. They are validated OE parts for specific Chevrolet, Buick, GMC, and Cadillac vehicles. These components are designed to give the engine oil leak protection from between the crankshaft output flange and the engine block. Order the engine crankshaft seal housing recommended for your ride.
( 8 )
$66.99
Edge Insight CTS3 monitors are the most comprehensive, state-of-the-art, multi-gauge touch screen display on the market. This third generation design is faster and more capable than ever. A simple installation that just plugs into an OBDII port and works on most domestic gas and diesel vehicles. They are the perfect tool for those who want to monitor their vehicle's performance and prefer not to program their vehicle--or for those who already have significant performance upgrades and want to safely monitor their vehicle's performance. Edge Insight CTS3 features include: * 5 in. full color, 720P high-resolution, swipe screen * 1 GB of on-board Ram * High-speed data logging export * Test and track performance runs such as 0 to 60 mph and 1/4 mile * Log, graph, and export parameters to track for improved performance * Set audible and visual alert notifications when certain parameters or temperatures are met * Multiple shift-on-the-fly performance tuning settings with EAS * Custom color mixer for gauge arcs, needles, and backgrounds * Multiple gauge screen layouts * Fully customizable backgrounds * One-touch easy menu navigation * Notification center * Switch between US or metric units of measure * Displays dozens of parameters * Light sensitivity meter to dim screen as ambient light decreases * Wi-Fi update-able * Backup camera adaptable
( 21 )
$499.95
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 136 )
$123.99
—
$152.99
Air Lift WirelessAir 2nd generation on-board air compressor EZ mount systems give you everything you need for the fastest, easiest installation possible. EZ Mount systems package the manifold and upgraded, heavy-duty compressor into one convenient, pre-assembled and factory-tested bracket—giving you everything you need to have full control of your air springs in no time at all. Control the air like a boss with your Air Lift WirelessAir 2nd generation EZ mount kit. Features and items: * Inflate and deflate each air spring independently to different pressures * LCD-display wireless controller * One-touch control from inside or outside vehicle is perfect for uneven/top-heavy loads * Two user-defined memory buttons * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * All wiring, hardware, and fittings required for installation
( 8 )
$799.95
Red Line created the industry of pushing bubbles out of the way to ensure cooling with their Water Wetter cooling system treatment. It's a unique agent for cooling systems that doubles the wetting ability of water. It offers rust and corrosion protection that allows for use of straight water in racing or reduced antifreeze levels in warm climates. It also improves heat transfer and reduces cylinder head temperature. Help your engine keep its cool with Red Line Water Wetter cooling system treatment. Instructions and specs: * Use 1 bottle for most passenger cars and light trucks—treats 3 to 5 gallons or 13.2 to 15.9 liters * Use 2 bottles with larger cooling systems * Use 1 oz. (3 to 4 capfuls) per quart for small cooling systems * Compatible with new or used antifreeze (including those with DEX-COOL and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems * Satisfies ASTM D2570 and ASTM D1384 corrosion tests for glycol-based antifreezes * Contains no ethylene glycol
( 169 )
$13.30
DiabloSport PredatorX tuners deliver the latest in tuning technology, allowing you to take control of your tuning needs from your smartphone. The iOS/Android compatible apps pair with the PredatorX dongle to give you complete tuning access from your pocket. The OBDII dongle can stay connected to the vehicle full time, so you're always just seconds away from being able to make tuning changes. The tuners are preloaded with power adding tunes for multiple octane levels, as well as transmission tunes for applications where they are needed. For those seeking more than the provided tunes offer, there is a plethora of end user based parameters that can be adjusted. Speed limiter, tire size, timing and fueling at wide-open-throttle, rev limiters, idle speed and so much more can be adjusted through the PredatorX. Features: iOS and Android support Tune from your smartphone! Preloaded with Performance tunes Trucks get tunes for 87 octane and Premium fuel Performance cars get tunes for 91 and 93 octane fuel TCM tunes are included End user adjustable parameters Disable AFM! Calibrate Speedometer for Taller Tires Set axle ratio if you've swapped gears Remove Speed Limiter Adjust Idle Speed Raise Rev Limiters Live data monitoring Read/Clear Diagnostic Trouble Codes (DTCs) Adjust options like idle, speed limiters, rev limiters, tire size, gear ratios and more. Support for 07-18 GM gas trucks and SUVs, 05-19 Corvette, and 10-24 Camaro V8, and more!
( 14 )
$295.95
If you're running headers with close tolerances or have an engine bay with little room, Summit Racing™ ceramic ignition wire sets are the cure for burnt and melting boots. Their ceramic coating acts as a heat mirror, reflecting infrared energy and heat away from the plug boot—and it's engineered to resist flaking and peeling. The 8mm spiral core silicone wires deliver maximum energy to the spark plugs with built-in RFI suppression for your street-driven vehicle. These affordably priced wire sets are true performance upgrade replacements for OE types. They're available (assembled or non-assembled) with different terminal and boot ends for fitment on a range of vehicle applications.
( 87 )
$127.99
—
$134.99
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 19 )
$24.99
—
$54.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 68 )
$69.99
—
$109.99
Trust Summit Racing™ to give you timing sets that will deliver accurate, reliable cam timing. Our billet steel true roller timing sets have rugged double-row, true-roller chains teamed up with billet steel crank and cam sprockets. The crank sprockets have multiple keyways, which allow you to modify your cam timing. Get reliable timing from Summit Racing™ billet steel timing sets.
( 119 )
$138.99
—
$152.99
The chain of command between a crankshaft, camshaft, and engine valves is central to your vehicle's basic movement—which is why it's so important to protect the timing belt. Fel-Pro timing cover gaskets provide a tight seal to keep contaminants out of the gear shaft area. They're offered in hundreds of single or multi-piece sets for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs; gaskets for industrial use are also available. Ideal for stock replacement (not intended for racing applications), Fel-Pro gaskets are made from materials such as fiber, cork, and rubber. Choose the kit which corresponds to your year/make and engine application.
( 544 )
$50.99
ATI Super Damper Serpentine Series harmonic balancers are patented and feature grooves for serpentine belts machined into the outer damper shell. The dampers come with six outer grooves for standard OEM drive systems—but eight and 10 grooves are available for supercharger or turbo applications. Serpentine dampers are offered in a variety of diameters, and crank hubs may be fitted with a 6-groove serpentine pulley to drive external oil pumps or vehicle accessories. The Serpentine Series Super Dampers fit all ATI GM-front crank hubs and can be adapted to many engine combinations, providing maximum flexibility. They're available in steel or lightweight, hardcoated aluminum. Features and benefits: * Eliminates torsional crankshaft vibrations * Exceeds SFI 18.1 specs * Black zinc chromate finished * Tunable, rebuildable, and extremely efficient at all rpms * Laser-engraved 360 degree timing marks
( 237 )
$419.90
—
$467.49
Summit Racing™ heavy-duty LS truck motor mount kits are a bolt-in upgrade to replace factory fluid filled mounts on select 2007-14 GMC and Chevrolet truck models. These mounts are constructed from powdercoated heavy-gauge steel and have a urethane insulator to limit engine vibration. The bolt together design can withstand all the abuse you can throw at your truck. Eliminate and replace weak factory motor mounts that are prone to breaking with Summit Racing™ heavy-duty LS truck motor mount kits.
( 15 )
$356.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
