Availability
Showing In Stock Items. Show All 26 Items.
BluePrint Engines Chevy LS 376 c.i.d. 530 hp EFI Retrofit dressed long blocks are for those wanting maximum horsepower and durability. Every BluePrint engine is dyno-tested for proven results and is backed by their exclusive 30-month/50,000-mile warranty. Specs and components for the Chevy LS 376 crate engines include: * New GM 6.2L block * Nodular iron rotating assembly * Forged connecting rods * Hypereutectic pistons * Aluminum cylinder heads -- 68cc chamber -- 2.165 in. intake/1.600 in. exhaust valves * Roller camshaft -- .612 intake/.585 exhaust lift -- 225 intake/238 exhaust duration at .050 -- 113 degree lobe separation * Compression ratio 10.7:1 * LS3 intake manifold * Fuel injection included * Coil packs * Oil pan * Valve covers * Timing cover * Water pump * Harmonic balancer * Spark plugs and wires
( 6 )
$11,149.00
ATK High Performance Chevy LQ4 6.0L 460 hp long block crate engines lay down impressive power that can be run with factory fuel injection or retrofitted with a carburetor. They're hand-built, balanced, and blueprinted using top-quality parts. Don't waste time trying to salvage a high-mileage short block when you can get a fresh mill that's ready for your choice of components to make it your own. ATK Chevy LQ4 6.0L 460 hp long block crate engines include: * Handpicked and seasoned 6-bolt main block * Aligned and honed main bores * OE steel crankshaft * 3.622 in. stroke * OE connecting rods * Hypereutectic dish top pistons * Aluminum cylinder heads * Hydraulic roller camshaft * Timing chain and gear set * 1.7:1 ratio rocker arms * 24-tooth reluctor
( 10 )
$5,049.99
BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 625 horsepower, this standard edition builder series includes a polished pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 565 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * OEM style (4.060 in. bored to 4.069 in.) * Main caps are 6-bolt * One-piece rear main seal Rotating Assembly: * New forged crankshaft * Stroke – 4.125 in. * Forged connecting rods (6.125 in.) * Forged pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.624 in. * Exhaust valve lift – 0.624 in. * Intake duration at 0.050 in. of lift – 239 * Exhaust duration at 0.050 in. of lift - 255 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * ECM supplied with calibration (initial and total timing are controlled by PCM) * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * All required (to make engine run) sensors and wiring harness (LS controller package only controls engine) * Unlocked ECU for local Dyno shop tuning refinement * LT4 87mm DBW (Drive-By-Wire) throttle body * Valve covers, retro-fit oil pan (fits most 1955-95 GM front engine, RWD, V8 cars), and timing cover * LS3 car intake manifold * Fuel injectors (42 lbs.) and return-less fuel rail * Coil packs * Spark plug wires * Gas/throttle pedal * Complete front accessory drive includes A/C, power steering, alternator, belts, and pulleys * ACDelco 41-985 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91-93 octane. Recommended oil is BPP710. Not designed for use with dry sump or pollution-controlled vehicles.
Not Yet Reviewed
$26,499.00
On Sale
With ATK High Performance Chevy LM7 5.3L 385 hp long block crate engines expect big mid to upper end power and a noticeable idle. They were designed to be performance upgrades for a 1999-2007 Chevy truck LM7 or an LS swap in a hot rod. Technical specifications include: * Horsepower: 385+ * Torque: 390+ * Block: GM 5.3L iron LM7 * Bore/stroke: Up to 3.809 x 3.622 * Year range: 1999-2007 * Displacement: 323 c.i.d. * Crankshaft: OEM GM 3.622 in. stroke internally balanced 24 tooth reluctor wheel .857 in. flange * Connecting rods: OE GM forged powder metal 6.093 in. stock bolts * Pistons: Hypereutectic dish * Piston rings: Moly rings * Compression ratio: 9.5:1 compression * Camshaft: Hydraulic roller * Camshaft specifications: Custom grind * Camshaft bearings: Installed and clocked to OEM position * Cylinder heads: OE aluminum 61.15cc 1.89/1.55 * Freeze plugs: Brass installed and sealed * Rocker arms: OE powdered metal 1.7 ratio * Oil Galley plugs: Installed and sealed * Weight: 385
( 15 )
$4,189.99
$3,989.99
On Sale
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 70 )
$4,785.99
$1,855.99
—
$6,664.99
ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LQ4 6.0L 535 hp base long block crate engine is fitted with LS3 heads. Engine specifications: * Horsepower: 535 * Torque: 485 * Block: OE LQ4/LQ9 6.0L iron * Bore/stroke: up to 4.030 in. x 3.622 in. * Displacement (cu.in): up to 371c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- ATK LS3 rectangular port aluminum -- 69cc/255cc -- 2.160 in. intake/1.600 in. exhaust * Rocker arms: OE 1.7 ratio with trunnion upgrade * Oil pump: Melling M295
Not Yet Reviewed
$5,199.99
ATK High Performance Chevy LM7 5.3L short blocks are assembled with OE flat top pistons and offer these engine specifications: * Seasoned 5.3L LM7 block * 1999-2007 year range * Bore/stroke: 3.810 in. x 3.622 in. * Displacement: 330 cu.in * OEM GM 24-tooth reluctor wheel crankshaft * OEM GM forged powder metal rods * Stock hypereutectic flat top pistons with two valve reliefs * Compression ratios: 61cc = 9.8:1/64cc = 9.5:1/68cc = 9.1:1 -- Can vary due to deck height/gasket thickness * Plasma moly rings * Camshaft bearings: Installed and clocked to OEM position * Freeze plugs: Installed and sealed * Oil galley plugs: Installed and sealed
Not Yet Reviewed
$2,043.99
ATK Marine Engines offers premium-quality rebuilt long block engines specifically for boating applications. These engines are designed to deliver maximum performance and long-term durability for your boat. Order the model recommended for your marine application. ATK Marine rebuilt engines include: * Special marine pistons and rings * Special marine camshaft * Marine gaskets * New intake and exhaust valves * New main, rod, and cam bearings * New valve lifters, rocker nuts, and swivels * Heavy-duty double roller timing chains * Cam sprocket * Crank gear * Freeze plugs
( 45 )
$5,153.99
—
$5,300.99
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a polished (or black) pulley kit and T56 manual transmission. The BluePrint aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged steel crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 trans combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged steel crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,599.00
—
$25,699.00
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a pulley kit and 4L65/70E automatic transmission. The aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,499.00
BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 625 horsepower, this standard edition builder series includes a choice of black or polished pulley kits and a T56 manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 565 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and T56 transmission combos. Other product features, items, and specifications include: Block: * OEM style (4.060 in. bored to 4.069 in.) * Main caps are 6-bolt * One-piece rear main seal Rotating Assembly: * New forged crankshaft * Stroke – 4.125 in. * Forged connecting rods (6.125 in.) * Forged pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.624 in. * Exhaust valve lift – 0.624 in. * Intake duration at 0.050 in. of lift – 239 * Exhaust duration at 0.050 in. of lift - 255 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * ECM supplied with calibration (initial and total timing are controlled by PCM) * Firing order is 1-8-7-2-6-5-4-3 Assembled 6-speed Transmission Package: * McLeod Super Street Pro twin-disc clutch * Steel bellhousing * Non-weighted billet flywheel * Starter * Gear ratios are 2.66:1 (first), 1.78:1 (second), 1.30:1 (third), 1.00:1 (fourth), 0.80:1 (fifth), and 0.63:1 (sixth) * Torque converter with 2,200–plus rpm stall Other Components: * All required (to make engine run) sensors and wiring harness (LS controller package only controls engine) * Unlocked ECU for local Dyno shop tuning refinement * LT4 87mm DBW (Drive-By-Wire) throttle body * Valve covers, retro-fit oil pan (fits most 1955-95 GM front engine, RWD, V8 cars), and timing cover * LS3 car intake manifold * Fuel injectors (42 lbs.) and return-less fuel rail * Coil packs * Spark plug wires * Gas/throttle pedal * Complete front accessory drive includes A/C, power steering, alternator, belts, and pulleys * ACDelco 41-985 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91-93 octane. Recommended oil is BPP710. Not designed for use with dry sump or pollution-controlled vehicles.
Not Yet Reviewed
$26,709.00
ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LM7 5.3L 500 hp base long block crate engine is fitted with AFR heads. Engine specifications: * Horsepower: 500 * Torque: 440 * Block: OE LM7/5.3L iron * Bore/stroke: up to 3.903 in. x 3.622 in. * Displacement (cu.in): up to 347c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- AFR CNC ported aluminum -- 59cc/200cc -- 2.000 in. intake/1.570 in. exhaust * Rocker arms: OE 1.7 ratio with trunnion upgrade * Oil pump: Melling M295
Not Yet Reviewed
$5,199.99
ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LM7 5.3L 500 hp long block crate engine is fitted with AFR heads and FiTech EFI. Engine specifications: * Horsepower: 500 * Torque: 440 * Block: OE LM7/5.3L iron * Bore/stroke: up to 3.903 in. x 3.622 in. * Displacement (cu.in): up to 347c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- AFR CNC ported aluminum -- 59cc/200cc -- 2.000 in. intake/1.570 in. exhaust * Rocker arms: OE 1.7 ratio * Oil pump: Melling M295 * EFI System: -- FiTech Ultra port injection LS1 750 hp with transmission control -- Wiring harness and ECM/TCM included * Fuel injectors: FiTech 55 lb. * Spark plugs: Autolite #104 * Spark plug wires: 8mm * Balancer: Stock internally balanced
Not Yet Reviewed
$8,899.99
ATK High Performance Chevy LM7 5.3L Gen IV short blocks are assembled with OE flat top pistons and offer these engine specifications: * Seasoned 5.3L LM7 Gen IV block * 1999-2007 year range * Bore/stroke: 3.810 in. x 3.622 in. * Displacement: 330 cu.in * OEM GM 58-tooth reluctor wheel crankshaft * OEM GM forged powder metal rods * Stock hypereutectic flat top pistons with two valve reliefs * Compression ratios: 61cc = 9.8:1/64cc = 9.5:1/68cc = 9.1:1 -- Can vary due to deck height/gasket thickness * Plasma moly rings * Camshaft bearings: Installed and clocked to OEM position * Freeze plugs: Installed and sealed * Oil galley plugs: Installed and sealed
Not Yet Reviewed
$2,206.99
These ATK High Performance Chevy LS 408 short blocks are made to handle some serious power. The foundation of any high performance engine is a rock-solid short block, so ATK designed and developed these to be just that. They feature a fully forged, balanced, and blueprinted rotating assembly that is available in a variety of configurations to fit naturally aspirated, nitrous, and forced induction builds, as well as those with 24 and 58-tooth cranks. These ATK High Performance Chevy LS 408 short blocks include the following: * GM LS Iron blocks * Aligned and hone main bores * Manley 4340 forged crankshaft * 4.00 in. stroke * Manley 4340 H-beam connecting rods * Manley forged pistons
( 4 )
$4,828.99
Whether you're looking to build a reliable engine for towing and hauling or want the foundation for a high-performance build, the Chevrolet Performance 6.0L 366 C.I.D. L76 Remanufactured Crate Engines are a great starting point and at a more affordable cost. These crate engines boast a number of features and benefits. Each engine is tested to meet or exceed GM's original equipment specifications. Additionally, every component is inspected and replaced if necessary. As a result, these remanufactured crate engines provide excellent value and dependability. Specific information (instructions): The replacement crate engines are built with two different designed oil pans. Differences are the first design oil pan has threaded hole for oil level sensor; the second design oil pan is without hole for the oil level sensor. Transfer oil pan from original engine or procure new, if required. For C/K Trucks, G-van applications, the oil pan on the replacement engine has been upgraded with a new oil deflector (shield) installed over a new oil pressure relief valve. If transferring the original oil pan to the replacement engine transfer these new components to that oil pan. --Transfer crankshaft balancer, crankshaft sensor, camshaft sensor, sensor wiring harness and bracket from original engine or procure new. --Install new crankshaft balancer bolt that is included with engine assembly. --Refer to instruction sheet for general/detailed information and instructions on components that are required to be transferred from the original engine assembly or procured new. --Transfer crankshaft balancer, crankshaft sensor, camshaft sensor, sensor wiring harness and bracket from original engine or procure new. --Install new crankshaft balancer bolt that is included with engine assembly. The replacement engine is built with a first or second design oil pan. The first design pan has a threaded hole for applications equipped with an oil level sensor. The second design oil pan is for applications that do not use an oil level sensor; no threaded hole. Transfer oil pan from original engine or procure new, if required. The replacement engine is built with first or second design valve rocker arm covers. The first design valve covers do not use quick connect PCV tubes. The second design valve covers use quick connect PCV tubes. Transfer valve covers from original engine or procure new, if required. The replacement engine may use rivet-type plugs in place of the coolant air bleed covers located at the top rear of each cylinder head. In applications that contain the rivet-type plug, it is not necessary to install the coolant bleed covers. For LS4 Applications, transfer the A/T flywheel/flexplate locator that is pressed into the rear hub of the crankshaft from the original engine or procure new. For C/K Trucks, G-van applications, the oil pan on the replacement engine has been upgraded with a new oil deflector (shield) installed over a new oil pressure relief valve. If transferring the original oil pan to the replacement engine transfer these new components to that oil pan. For 2007 Cadillac Escalade and GMC Yukon Denali applications w/6.2L L92: Engines prior to April 2006 were built with AFM (Active Fuel Management) hardware components, but the AFM system is not enabled on the 2007 L92 engine. The replacement engine does not contain the AFM hardware; it includes a valley cover that is used in place of the VLOM (valve lifter oil manifold). Do not transfer AFM hardware to replacement engine. When performing an engine replacement on a L92 engine that was originally equipped with AFM hardware, the VLOM electrical connector must be removed from the wiring harness. Included Engine Content: * Engine Block * Pistons * Crankshaft * Connecting Rods * Cylinder Head * Camshaft * Front Cover * Housing, Cr/Shf Rear Oil Seal * Valve Cover/Cam Cover * Valve lifter Oil Manifold (VLOM) * Oil Pan
Not Yet Reviewed
$7,373.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
