Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
2006 DODGE Engines & Components
Showing In Stock Items. Show All 46 Items.
COMP Cams Hydraulic Roller Lifters
These lifters are for use with the newly designed Hydraulic Roller Cam Series from COMP Cams—or as replacements for stock hydraulic roller lifters. You must be certain that the lifter is correct for the type of block used, because some later model blocks require special lifter designs. Order the model tailored for your engine application.
( 11 )
$517.95
Fluidampr Harmonic Dampers
Using only three parts (a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two), SFI-approved Fluidampr harmonic dampers can control all crankshaft vibration--not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.
( 144 )
$574.82
—
$643.31
COMP Cams HRT Stage 2 Camshafts
COMP Cams HRT Stage 2 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads.
( 1 )
$579.95
Eagle H-Beam Connecting Rods
Free your engine's horsepower on the wings of Eagle H-beam connecting rods. Their 2-piece, forged, vacuum-degassed, 4340-certified steel construction provides outstanding strength, while still weighing much less than stock rods. Each rod is multi-stage heat-treated, X-rayed, sonic-tested, magnafluxed, 100 percent machined, and then shot-peened to stress-relieve the metal. The rods have precision cap alignment sleeves to positively locate each rod cap, silicon bronze bushings for floating pin models—and are available in stroker models that allow additional cam-to-rod clearance for large stroke combinations. They come standard with 190,000 psi rated ARP 8740 and 230,000 psi rated ARP 2000 rod bolts, or 265,000 psi rated ARP L-19 bolts as upgrades. Instructions and rod bolt lubrication are included. Order the model designed for your vehicle year/make and engine application.
( 85 )
$694.99
—
$704.99
COMP Cams Evolution Series Hydraulic Roller Lifters
COMP Cams Evolution Series hydraulic roller lifters with Hydraulic Cartridge Technology (HCT) are revolutionary patented tappets. A combination of a self-contained hydraulic cartridge within a thick-wall lifter body and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter on the market. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market today. Startup noise is greatly reduced, and a precision-controlled bleed down rate ensures excellent performance at high RPM. The cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. The patented HCT tappets are a completely new design that was developed specifically by COMP Cams to meet the demanding performance and durability required for modern street and performance street engines. The HCT and proprietary manufacturing processes of these lifters ensure precision and longevity that exceed any lifter on the market. Other features include increased duration and lift to the camshaft and two oiling features. Another industry first is the fact that the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild lifters in his or her own garage. Order the Evolution lifters recommended for your year/make and engine application.
( 13 )
$646.95
COMP Cams HRT Stage 3 Camshafts
COMP Cams HRT Stage 3 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles engineered to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT Stage 3 cams receive the Micro Surface Enhancement (MSE) finishing process as a standard feature to increase strength and performance by reducing surface peak roughness. This also provides noticeable improvement in the effective load bearing area, thus allowing for much higher loads. Order the model recommended for your vehicle and engine application.
( 1 )
$579.95
Holley Gen III Hemi Timing Covers
Holley Gen III Hemi timing covers are offered in two finishes for your mid-mount accessory drive system. Available for Hemi engines with or without VVT, these covers are the correct replacements for those originally supplied in your Holley complete accessory system. They will provide the perfect fit and expected performance to service your system. Choose the Gen III Hemi timing cover required for your setup.
Not Yet Reviewed
$530.95
—
$587.95
PRW Dodge Cummins Rocker Arm Systems
PRW Dodge Cummins rocker arm systems are the perfect upgrade to provide more power and run your diesel engine more efficiently. Each rocker is made from alloy steel substantially stronger than stock. PRW Cummins shaft systems are manufactured to exceed OEM specifications as a "drop in" assembly using the stock arm ratios. The upgraded rocker arm systems are complete with everything you need, from ball adjusters and fasteners, along with silicon bronze bushings instead of OEM-style needled bearings for prolonged life expectancy. Note: some applications are pre-machined for high performance cylinder head stud kits.
( 1 )
$679.93
COMP Cams HRT Stage 1 Camshafts
COMP Cams HRT Stage 1 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads. All HRT Stage 1 camshafts do not require upgraded valve springs.
( 1 )
$579.95
ATI Super Damper Diesel Harmonic Balancers
ATI Super Damper diesel harmonic balancers are designed with absolute precision in mind and are one of the highest quality harmonic balancers purpose-built for Cummins, Duramax, and Power Stroke diesel engines. These dampers eliminate torsional vibration at the crankcase to significantly reduce wear on your engine, as well as allow power to come on much quicker and smoother to balance out the engine. ATI Super Damper diesel harmonic balancers are tunable, serviceable, and SFI-approved!
( 8 )
$518.95
Mahle Original OE Replacement Pistons
Mahle Original replacement pistons have the same great OE features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Choose the model designed for your vehicle and engine application.
( 7 )
$678.99
COMP Cams Xtreme Fuel Injected Camshafts
COMP Cams Xtreme fuel injected camshafts are designed for late model applications. Ground using faster-opening and more efficient ramp profiles, Xtreme camshafts are engineered for 1.6 ratio rocker arms and beehive valve springs, which provide a dramatic increase in torque and horsepower.
( 29 )
$579.95
Manley Steel H-Beam Connecting Rods
Manley steel H-beam connecting rods are made from forged 4340 steel alloy. They're packed full of performance features, such as a compact uniform-grain structure for ultimate strength, full machining, stress relieving, and magnafluxing. The wrist pin and big end bores are honed to a +/-.0002 in. tolerance, and the wrist pins get a bronze alloy bushing. These units include cap screw ARP 8740 alloy rod bolts, and each rod set is weight-matched to within 2 grams. Available individually or in a set, order the model recommended for your vehicle year/make and engine application.
( 8 )
$744.28
VEGE Remanufactured Cylinder Heads
VEGE Remanufactured cylinder heads are a popular choice for performance and value. With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured cylinder heads with a level of quality that equals that of new OEM products—at extremely competitive prices. The rebuilt cylinder heads are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include a cast iron or aluminum cylinder head, intake and exhaust valves, valve springs, retainers, locks, stem seals, rocker arm studs, and more. Many heads include rocker arms. Nearly a thousand models are available, for fitment on countless applications.
( 43 )
$546.99
—
$563.99
COMP Cams Turbo and Blower HRT Camshafts
Comp Cams turbo and blower HRT camshafts are available in a variety of mild-to-aggressive styles. These replacement hydraulic roller tappet models work with your blower, turbo, or supercharger to help provide the most power possible. Choose the grind and options needed for your vehicle and engine application.
( 1 )
$579.95
Mahle Original OE Replacement Single Piston and Ring Kits
Mahle Original single piston and ring kits have the same great OE features to provide the perfect fit and function in your vehicle. Things like compensated ring grooves to ensure proper ring loading and oil control and expansion-controlled designs for small fitting clearances to reduce engine noise, wear, emissions, and improve oil control. They offer pistons ready for installation with mounted piston rings, with pin and clips included for the convenience of the engine builder. Whether you're repairing or restoring, you can count on the performance of Mahle Original single piston and ring kits.
Not Yet Reviewed
$524.99
Melling M-Select Class 1 Camshafts
Melling M-Select Class 1 camshafts are part of their full line of high performance camshafts graded from Class 1 to Class 4. Class 1 camshafts have durations of 200 to 215 degrees at .050 in. lift. They feature good idle quality with strong low-rpm torque and midrange performance. These cams will work well with stock or slightly modified engines with either manual or automatic transmissions. M-Select Class 1 camshafts may have lower vacuum than OE camshafts.
( 34 )
$502.99
D.S.S. FX-Series Forged 2618 Alloy Pistons
If you're pushing the envelope on your engine combination or need parts that will stand up to the demands of today's power levels, D.S.S. FX-Series forged 2618 alloy pistons will increase your horsepower potential without killing the budget. Forged and machined with premium aircraft quality 2618 alloy, these pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. The FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Select the pistons for your application. Key features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High-strength piston wrist pins * Deep CNC valve reliefs
( 5 )
$719.95
COMP Cams Xtreme Energy Camshafts
COMP Cams Xtreme Energy camshafts employ the latest cam technology to provide maximum performance. Whether your use is off-roading, towing, or street performance, there's an Xtreme Energy cam available for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers—while delivering increased engine vacuum. Hundreds of models are available for fitment on vehicles from 1955 to the present. Select the cam designed for your application.
( 342 )
$704.95
ICON Premium Forged Piston and Ring Kits
You don't need a king's ransom to rule the track, thanks to ICON premium forged piston and ring kits. They deliver high-performance racing pistons crafted from high-strength, primary aluminum alloys and matching performance piston rings. The pistons feature fully machined heads and valve ports, advanced accumulator and mini groove technology, drilled pin holes, triple-wound spiral lock rings, and their proprietary diamond-finished skirts. ICON premium forged pistons can handle the pressure and abuse from the horsepower numbers that your engine produces. If you're ready to give up your kingdom to build more horsepower with a great set of pistons--think again! The ICON premium forged pistons and ring kit best suited for your application will help you reign victorious without spending a lot of cash.
( 20 )
$679.99
—
$734.99
Milodon Drag Race Oil Pans
Milodon drag race oil pans ensure an ample supply of lubricant under rapid acceleration. These pans have a full-length louvered windage tray and double trap doors to provide a positive oil control system. This results in consistent oil pressure and significant horsepower output increases. They also feature durable steel construction and a gold iridited finish.
( 18 )
$587.72
COMP Cams Tri-Power Xtreme Camshafts
COMP Cams Tri-Power Xtreme camshafts have been designed to work with the FAST-FLASH programmers to optimize torque and horsepower and improve fuel efficiency. They are available for late model, fuel injected, computer-controlled engines. The COMP Cams Tri-Power Xtreme camshafts work with a standard valvetrain, and require no modifications to install.
Not Yet Reviewed
$579.95
Melling Timing Chain Sets
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 133 )
$577.99
Dualoy Cast Pistons
Dualoy cast pistons are designed for diesel and medium-duty gas engines. They're cast from aluminum and machined in-house to maintain the highest level of quality and consistency. The diesel applications feature an iron ring insert in the top ring groove designed to accept the Keystone-style top ring. Dualoy piston sets are available for most popular diesel light or medium-duty truck applications and engine codes.
Not Yet Reviewed
$531.99
