Availability
Showing In Stock Items. Show All 260 Items.
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 898 )
$251.99
—
$327.99
All cylinders, all the time! Get the most out of every mile with a Range Technology AFM/DFM Disabler Device. These modules allow your V6 or V8 GM vehicle to run in full cylinder mode at all times. This patented technology is the only product that will disable AFM or DFM without reprogramming the factory ECU. You get full power delivery all the time without factory warranty concerns. Additional features: * No more shuddering or dropping cylinders * Fast and easy setup; simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM or DFM system * No tools needed; simply remove to uninstall * All-terrain power and control in any situation—bad weather, off-road, and carrying heavy loads * Safe and reversible: leaves no trace; unplug it to return to factory settings * Fits all V6 and V8 General Motors AFM/DFM vehicles, including cars, trucks, and SUVs * Device is available in multiple color options
( 213 )
$259.95
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 369 )
$286.99
—
$306.99
GM performance fans will be geeked to learn about MSD's direct plug-in 2-Step launch controls for LS engines. These units are easy to install with factory-style connectors for a splice-free installation. When you're staged, you can hold the pedal to the floor, while the rpm stays at a consistent level, producing consistent launches.
( 86 )
$349.95
DiabloSport PredatorX tuners deliver the latest in tuning technology, allowing you to take control of your tuning needs from your smartphone. The iOS/Android compatible apps pair with the PredatorX dongle to give you complete tuning access from your pocket. The OBDII dongle can stay connected to the vehicle full time, so you're always just seconds away from being able to make tuning changes. The tuners are preloaded with power adding tunes for multiple octane levels, as well as transmission tunes for applications where they are needed. For those seeking more than the provided tunes offer, there is a plethora of end user based parameters that can be adjusted. Speed limiter, tire size, timing and fueling at wide-open-throttle, rev limiters, idle speed and so much more can be adjusted through the PredatorX. Features: iOS and Android support Tune from your smartphone! Preloaded with Performance tunes Trucks get tunes for 87 octane and Premium fuel Performance cars get tunes for 91 and 93 octane fuel TCM tunes are included End user adjustable parameters Disable AFM! Calibrate Speedometer for Taller Tires Set axle ratio if you've swapped gears Remove Speed Limiter Adjust Idle Speed Raise Rev Limiters Live data monitoring Read/Clear Diagnostic Trouble Codes (DTCs) Adjust options like idle, speed limiters, rev limiters, tire size, gear ratios and more. Support for 07-18 GM gas trucks and SUVs, 05-19 Corvette, and 10-24 Camaro V8, and more!
( 13 )
$295.95
DiabloSport inTune i3 Platinum computer programmers come pre-loaded with industry-best Diablo tunes created by their experienced, professional calibrators. They too, are performance enthusiasts addicted to horsepower and racing—and they appreciate the need for custom tunes to take their vehicles to the next level with additional modifications. inTune i3 Platinum units will get your ride "dialed-in," whether you've added a cam, headers, a supercharger, or power-adder. The i3 performance programmers work hand-in-hand with CMR (Chip Master Revolution), allowing you (and the tuning shop of your choice) to tune specifically for your aftermarket modification—from there, the sky is the limit! You've made a significant investment in premium parts for your vehicle. Now let the DiabloSport inTune i3 Platinum computer programmers tie all the ingredients together to make your ride stand out! Order the model designed for your vehicle application.
( 147 )
$464.95
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 641 )
$499.95
On Sale
With Holley Sniper throttle bodies, Holley engineers went back to the drawing board to build the ultimate air valve for your engine! They feature enlarged bore sizes, allowing for increased airflow to support your higher horsepower needs. A progressive throttle pulley enhances low-speed drivability, and a double return spring provides solid and secure throttle control feel. These units are maximized for your application, with a 4-bolt style mounting pattern; most models include bolts and gaskets. Order the throttle body designed for fitment with your year/make and engine family.
( 39 )
$267.95
—
$320.95
Behind the scenes, but still important—McLeod's 1400 Series hydraulic throwout bearings play a special role in the optimal performance of your vehicle. Their most versatile choice to fit most applications, the 1400 bearings slip right over the front collar of your transmission. They're self-adjusting, meaning that you'll never have to adjust them as your clutch wears—and they can be set for the proper mounting clearance needed. The bearings are made of the finest hard-anodized billet aluminum, and equipped with quality elbow swivel fittings and high-pressure stainless steel lines for extreme durability. What happens backstage is just as crucial as what happens out front to bring about a rousing performance. You can't see McLeod 1400 Series throwout bearings as they work, but the part they play is vital to optimize the performance of your mean street or strip vehicle.
( 37 )
$475.00
—
$485.00
Banks Power PedalMonster is the first OBD-II connected throttle sensitivity controller for gas and diesel vehicles. Controlled via Banks iDash or mobile app, PedalMonster is the only module of its kind to offer safety features like ActiveSafety, Reverse Safety, and Adjustable Low-Speed Trim. Select the model that best suits your application. Product features: * City, Sport, and Track modes, each with 10 sensitivity levels * OBD-II connected * ActiveSafety failsafe circuitry with Health Monitoring * Reverse safety returns pedal to stock in reverse gear * Adjustable Low-Speed Trim controls how fast sensitivity is added at slow speeds * Powered by +12 V via OBD, not low-overhead pedal circuit * Controlled by iDash DataMonster, iDash SuperGauge and mobile app * View PedalMonster's activity in real-time via iDash and mobile app * Simple plug-and-play installation * Warranty friendly. Does not leave footprint after removal
( 38 )
$319.00
PowerBond Race performance harmonic balancers bring the advantages of bonded balancers to high-revving and high-horsepower street/race applications where an SFI-approved balancer is required. They have been tested beyond 21,000 rpm without failure, and every balancer features a precision CNC-machined AISI 1045 forged steel hub bonded to an equally strong steel inertia ring. They are very light and in most cases, they are only marginally heavier than the original cast iron balancer. The steel inertia ring on the Race Series models is positively protected against forward and backward movement. PowerBond uses our Race Series high-pressure, low-cure that features a natural rubber developed in our laboratory. Every model has easy to read computer etched timing marks and meet SFI specification 18.1.
( 98 )
$291.99
—
$353.99
Maradyne Jetstreme electric fans feature a low-profile design to allow for turbo or supercharger installations. They use a sealed motor tested in accordance with DIN EN 60529 and are dust and waterproof to IP68. The fans utilize an S-blade design for quieter operation and have a rubber seal that eliminates vibration contact and increases airflow. Maradyne Jetstreme electric fans have all glass-filled nylon construction for maximum durability.
( 18 )
$452.41
Cold-Case performance aluminum radiators are available and affordable for all. These high-quality, tube-and-fin performance radiators are true OE styles for most applications. Each Cold-Case design distributes fluid more evenly, eliminating hot and cold spots. Also, the massive cores take up the entire width of their tanks, so you get the most efficient cooling possible. The radiators drop-in without modifications needed (on most) and look original. Plus, Cold-Case stands behind its quality and research with a limited lifetime warranty on their products. All Cold-Case radiators feature: * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 628 )
$520.54
Superchips Flashpaq tuners will optimize both engine and transmission calibration throughout the entire powerband. They're effective from part-throttle through wide-open throttle. Features include: * Internet updateable * Built-in diagnostic trouble code definitions * Built-in help screens * USB communications * Custom application upgradeable * Multiple tuning levels * Increased user options for more control * Ergonomically-designed case * Large, soft key buttons * Permanently mounted cable * 300 percent larger screen * Backlit screen for easy-to-read night use
( 97 )
$449.95
Using only three parts (a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two), SFI-approved Fluidampr harmonic dampers can control all crankshaft vibration--not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.
( 142 )
$466.77
DiabloSport inTune i3 is their third generation of computer programmers, delivering the same great power, features, and application coverage that has established DiabloSport as must-haves for performance enthusiasts. The inTune i3 units, while designed to keep drivers equipped with added horsepower and torque, are also available with 50 state certification. DiabloSport has bundled performance and compliance to offer more for your car, SUV, or truck—paired with the assurance of knowing you're covered at your local smog or emissions center. There's no need to sacrifice power when you choose DiabloSport inTune i3 computer programmers. Order the model designed for your vehicle application. Key features of DiabloSport inTune i3: * Vehicle licenses available to tune multiple vehicles with just one device * New intuitive online update software to keep your i3 current with extended coverage/features, add an extended product warranty, and more * Industry-leading vehicle application coverage for thousands of cars, trucks, Jeeps, and SUVs * Update on the go with Wi-Fi connectivity
( 28 )
$464.95
Granatelli Motor Sports Street Fighter coil packs offer true high performance featuring advanced bobbin technology, a specialized magnetic steel core, and optimum windings. These features result in higher energy and voltage outputs, plus arc duration. Installation is easy, too--they're direct bolt/plug-in units.
( 25 )
$359.10
On Sale
MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.
( 240 )
$449.95
Put the engineering expertise of Trick Flow® to work on your engine with a Track Max® harmonic damper. These SFI-18.1 rated, carbon steel dampers have an injection-molded and bonded elastomer plus engraved timing marks for easy adjustment. The corrosion-resistant black powdercoated finish provides good looks and long-lasting durability.
( 68 )
$349.99
Improved Racing set out to design the best air-oil separating catch cans specifically for the factory supercharged vehicles. Focused on three simple design goals: maximized efficiency, durability, and ease of use, the development of the CCS oil catch cans happened over several years and included ANSYS Fluent CFD simulations, extensive bench tests, and on-vehicle street and track tests. Final prototype testing also included a 9-month beta testing program in collaboration with various road racers, drag racers, and drifters. The CCS's design maximizes air-oil separation efficiency, resulting in a peak separation efficiency of 85 to 90 percent. For comparison, none of the competitor's catch cans tested showed a peak efficiency of more than 60 percent. The CCS oil catch cans are durable, made from high-quality, reliable components and, as with any Improved Racing product, nothing will vibrate loose or come apart under racing conditions. Keep contaminants out of your intake to increase octane and keep your engine clean with Improved Racing CCS oil catch can kits. Select the kit specifically designed for your application needs. Product details: * The CCS features tangential entry port for cyclonic separation for maximized efficiency—separates as much vapor from crankcase blow-by fumes as possible with minimal restriction * Other features include stainless steel filter with multiple filter seals, primary seal, bell mouth exit plenum, anti-splash-back funnel with spiral drain groves, and 7.0 fluid oz. or 3.5 fluid oz. reservoir * Quick-turn, easy to service reservoir * Includes mounting bracket and custom made, emissions friendly, quick-connect lines—designed specifically for factory supercharged vehicles * CNC-machined aluminum bracket locks into position every 22.5 degrees—allows for different mounting options specific per the make and model vehicle to offset catch can from engine to clear larger engine covers, evap lines, etc. * Optional drain kit (sold separately) is available to allow for remote draining without removing the catch can—because engine bay fitment is tight on specific vehicles * Fast and flexible mounting bracket system for installation/removal and positioning—tool-free bracket nut can be removed without tools, or snug it down with 5/8 in. wrench * No sight glass needed—just push-up and twist a 1/8th turn to remove the reservoir and look inside, no more fumbling, or endless unscrewing to remove the reservoir * A powerful wave spring keeps the reservoir locked in place—included positive safety lock clip is also included just in case you want to be absolutely sure the reservoir cannot be removed
( 2 )
$299.00
Cast flywheels are not explosion-proof and can be dangerous when used in high performance applications at higher rpm. RAM billet steel flywheels are recommended as replacements for factory-cast flywheels in high performance and racing vehicles. Made in America and produced in-house, all RAM flywheels are computer balanced within a 1/2 oz., surface ground (which results an optimum mating surface), and are ready to run out of the box. They're better for launching heavier drag race cars and provide better drivability in street vehicles. SFI-approved, RAM billet steel flywheels are CNC-machined from certified materials. Order the model recommended for your year/make and engine application. Technical note: As they spin, heavy flywheels store more energy than lighter ones. Engine and gearing combinations that require more power or inertia to make the car launch without bogging the motor need heavier flywheels. However, heavier flywheels accelerate slower. Lighter flywheels create less inertia at launch, but accelerate quicker through the gears. When choosing a flywheel, you must consider the car's weight, operating rpm of the engine, and, most importantly, the gearing. Insufficient gearing will cause an engine with too light of a flywheel to "bog" on launch.
( 132 )
$279.00
Restore proper engine function with Dorman throttle bodies. These electronic assemblies will maintain the correct volume of airflow into your engine. Each of these units features a butterfly valve, which is electronically controlled by the ECU to precisely open and close for the correct regulation of the fuel/air mixture. Many feature cast aluminum housings with an exact fit for an easy installation. Dorman throttle bodies offer durable, reliable performance that is essential to the operation of your engine.
( 16 )
$289.99
If you're looking for pistons with an unbeatable combination of performance and value, then Speed-Pro hypereutectic pistons are for you. These pistons are manufactured from aluminum alloy that contains 16 percent silicon for greater strength and wear resistance. They're also molded in the latest permanent-mold technology to ensure the precise fit and tight bore clearances that today's top engine builders demand. Hypereutectic pistons are ideal for use in high performance street, bracket, and oval track racing—and will work perfectly with normal ring end gaps. Choose the model designed for your vehicle and engine application.
( 332 )
$277.99
—
$397.99
Summit Racing™ Protorque Starters are 100 percent new! Our lightweight Nippondenso-type starters offer a 4.0:1 gear-reduction ratio and a whopping 1.9 HP. That's 222 ft.-lbs of racecar cranking power. If that's not enough cranking power to suit you, there are even more powerful 3.1 hp monsters, which are a pound lighter! They have a 4.44:1 reduction ratio and churn out an awesome 342 ft.-lbs. of torque. Both of our Summit Racing™ powerhouses are suitable for engines up to 502 c.i.d., and compression ratios of up to 18.0:1. GM versions are adjustable for five mounting positions; Ford types, for 18. And, to prevent corrosion and electrical shorts, both starters wear a gold dichromate finish.
( 600 )
$261.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
