Availability
Showing In Stock Items. Show All 22 Items.
Mr. Gasket MLS (multi-layered steel) header gaskets are designed for extreme cylinder pressures produced by high horsepower, high compression, turbo-charged, supercharged and nitrous equipped engines. MLS header gaskets are manufactured from three stainless steel layers that resist corrosion, will not burn through or push out, and maintain maximum fastener torque retention. Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal excessive exhaust pressure produced from cylinder heads.
( 14 )
$56.69
Typical aftermarket exhaust manifold bolts are much shorter than stock which after numerous heat cycles can cause them to fatigue and start to stretch, leading to exhaust leaks and possible breakage after repeated re-torques. The finish and coating on most of these bolts can also lead to premature corrosion and zinc embrittlement. Replace damaged or corroded exhaust manifold bolts with BD Diesel class 10.9 bolts and spacers which improve thermal durability to stand up to the heat and non-Zinc plated fasteners prevent zinc embrittlement. Order the kit recommended for your vehicle and engine application. BD Diesel exhaust manifold bolt and spacer kit #1041483 details: * Exhaust spacers ensure fastener operates in elastic stretch without fracture or permanent yield * Class 10.9 hardware * Non-zinc plated fasteners prevent zinc embrittlement * Includes 16 exhaust spacers (18mm) * Includes 16 flange head exhaust bolts (M8x1.25 – 40mm 10.9)
Not Yet Reviewed
$93.95
Leaks in the exhaust manifold produce bad exhaust valves, a loss of power, and increased fuel consumption. Mahle Original exhaust gaskets require metal beads where the gas passes through at very high temperatures and low pressure. These metal beads are reinforced with metal sheets to resist the component movement that arises from large fluctuations in temperature.
( 14 )
$64.99
Manufactured from reusable .062 in. thick flat annealed copper, these SCE Pro Copper exhaust gaskets will conform to rough or damaged surfaces to provide a tight, leak-proof seal. Whether your ride is a motor home or hot rod, or used for towing or racing you'll appreciate the trouble-free seal of properly fitted SCE Pro Copper exhaust gaskets.
( 5 )
$99.48
Clean, flat surfaces are essential to a good seal. However, that type is surface is rarely available. The best way to seal a warped or uneven exhaust is with SCE Pro Copper embossed exhaust gaskets. These replacements feature an embossed O-ring around the exhaust port to increase sealing pressure for tight, leak-proof performance, even on imperfect surfaces. Whether your ride is a motor home or hot rod, or is used for towing or racing, you'll appreciate the trouble-free seal of SCE Pro Copper embossed exhaust gaskets, available for a wide range of port styles and sizes.
( 102 )
$51.38
—
$59.05
BD Diesel exhaust manifold gaskets will provide a leak-free seal to get rid of pesky exhaust leaks. They are made of a special composite material that will ensure that there will be no leaks. The gaskets are designed to fit BD Diesel exhaust manifolds without any modifications.
( 3 )
$85.95
We have put together these Summit Racing™ exhaust gasket and bolts Pro Packs to ensure a leakproof seal for your headers. They feature Fel-Pro Performance exhaust header gaskets made from high-temperature, high-density fiber material around a perforated steel core for durability and heat resistance. To provide a tight seal, we include Stage 8's Grade 8 locking header bolts. They use a patented system that consists of a grooved hex head bolt, a retainer, and a snap clip. The retainer fits over the bolt head and locks the bolt against the header tube, and the snap clip holds the retainer in place. Use one of these Summit Racing™ exhaust gasket and bolts Pro Packs to eliminate blown header gaskets from loose bolts.
( 7 )
$83.69
—
$102.91
Flatout offers a comprehensive line of performance gaskets, including header gaskets, which are engineered from top-grade materials to take on high-heat produced by your exhaust headers. Their high thermal conductivity pulls heat away from the heat source and allows them to expand and contract without damage. Flatout header gaskets feature smooth contours, accurate hole locations, and tight tolerances to provide an exceptional fit and seal. Get the most performance out of your engine, use Flatout header gaskets--they seal where others don't!
( 10 )
$50.99
—
$61.99
Fatout Armored RCC (rubber coated copper) header gaskets features a rubber coating that is inert to almost all fluids and solvents and can withstand the extreme temperatures produced by the hottest drag motors. The dry coating is very thin to ensure low torque loss and is durable enough to be reused in most cases.
( 13 )
$61.99
Dorman EGR cooler gasket kits provide a tight seal for your EGR cooler, to stop and prevent air leaks. They contain all of the gaskets and O-rings you need for a complete repair of the EGR cooler. The kits may also be used for a variety of other automotive repairs, including intake manifold replacement and oil cooler service.
Not Yet Reviewed
$78.95
Cometic Gasket exhaust gaskets deliver performance. Whether you are looking for OE replacements or the higher performance of spiral-wound stainless steel or graphite, Cometic has exhaust gaskets to seal your motorcycle.
( 1 )
$53.48
—
$98.63
Patriot header flange gaskets are thick, tear-resistant, and cut to match your Patriot header flanges. Constructed from graphite coated steel core laminate, the gaskets are available in a variety of styles. Order the model recommended for your application.
( 9 )
$58.35
Unwanted engine noise and fumes under the hood can often be traced to poor seals. Fel-Pro offers an extensive line of replacement gaskets to provide a leak-free connection between your intake and exhaust manifolds. Designed for OE-style fitment on hundreds of specific makes/models, the gaskets are crafted from top-quality materials, such as steel core laminate and compressed fiber laminate. Order the gasket configuration to match your exhaust manifold specs.
( 193 )
$74.99
—
$84.99
HardDrive exhaust port gaskets offer a great replacement for installing that aftermarket exhaust system or just fixing a pesky leak in general. Their knit-wire design are great for sealing and offer lasting durability. Fits most popular applications.
Not Yet Reviewed
$71.06
HardDrive exhaust port gaskets deliver improved sealing capabilities. Crafted in the knit wire-style, these tapered graphite options will efficiently prevent leaky connections. They fit most popular applications, so next time you change mufflers, change your exhaust port gaskets to HardDrive.
Not Yet Reviewed
$71.06
Doug's premium header flange gaskets are made extra-thick from specially formulated gasket material. These gaskets are rated up to 1,100 degrees F and handle exhaust pressures of up to 3,700 psi. Each gasket is designed for an exact port match with Doug's headers.
( 29 )
$50.35
JBA Performance Exhaust offers exhaust header gaskets to aid in the fitment of your JBA exhaust product to fix an exhaust manifold gasket leak—or prevent it from happening in the first place. These premium header flange gaskets feature a steel core laminate construction to ensure a good seal and are available in a variety of gasket applications to be an exact port match with JBA Performance Exhaust headers.
( 16 )
$61.95
Beck/Arnley high-quality exhaust manifold gaskets are designed to meet or exceed OEM standards for ultimate form, fit, and performance. They're available in a wide range of materials and configurations for fitment on countless vehicles from the 1950s and up. Order the replacement model recommended for your application.
( 1 )
$50.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
