Availability
Showing In Stock Items. Show All 216 Items.
Your valves will open more quickly from a fully closed to a fully opened position with a roller setup, compared with conventional flat lifters. With Sealed Power Hydraulic roller lifters you will notice higher performance, quieter engine operation, and more horsepower. They also provide proper vacuum and idling capabilities.
( 26 )
$121.99
—
$216.99
Fel-Pro headbolt kits contain a complete set of the highest quality headbolts and hardened washers available. They're cold-formed to ensure molecular integrity, then heat-treated prior to thread rolling and machining. Reduced-diameter bolt heads eliminate the need for valvetrain removal and facilitate cylinder head re-torquing. The bolts are available in a variety of head styles for fitment on specific vehicle and cylinder head applications.
( 216 )
$32.99
—
$169.99
Mopar Replacement rocker arms offer an original equipment fit. That means their fitment and install will be hassle-free. These genuine OE Mopar parts will help to keep your vehicle's engine running its best. Select the Mopar Replacement rocker arms designed for fitment for your vehicle application.
( 18 )
$161.99
Using only three parts (a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two), SFI-approved Fluidampr harmonic dampers can control all crankshaft vibration--not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.
( 140 )
$574.82
—
$618.51
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 344 )
$202.99
—
$212.99
For maximum performance and durability on the street or at the track, trust Fram HP Series oil filters. They offer twice the oil flow rate and four times the dirt-holding capacity of standard oil filters. Their extra-thick steel cans and heavier gauge tapping plates are designed to withstand the high pressures and flexing caused by demanding driving conditions. Tough steel end caps hold a spiral-shaped center tube to offer more durability and protection against collapse. Fram HP Series oil filters are compatible with all oil types and have been optimized for racing and high performance street cars. Additional features include: * Low-restriction racing media designed for high oil flow * 94 percent efficiency at 20 microns * Silicone anti-drainback valve on many applications * 10 to 18 gpm recommended maximum oil flow, depending on model * Maximum burst pressure: 350 to 500 psi, depending on model * Maximum operating pressure of 200 psi * Screen over bypass valve for extra protection against large contaminants * High-flow bypass valve * Flanged steel end caps
( 124 )
$13.99
—
$16.99
PRW Dodge Cummins rocker arm systems are the perfect upgrade to provide more power and run your diesel engine more efficiently. Each rocker is made from alloy steel substantially stronger than stock. PRW Cummins shaft systems are manufactured to exceed OEM specifications as a "drop in" assembly using the stock arm ratios. The upgraded rocker arm systems are complete with everything you need, from ball adjusters and fasteners, along with silicon bronze bushings instead of OEM-style needled bearings for prolonged life expectancy. Note: some applications are pre-machined for high performance cylinder head stud kits.
( 1 )
$679.93
Whether you're building a tow rig, race truck, or just want to keep your daily driver on the road for the long haul, you need to upgrade your head bolts with Gator Fasteners heavy-duty head stud kits. Gator head studs have a much higher strength and will not stretch like the factory bolts, helping to keep your truck from popping head gaskets. Designed for stock to moderately built engines. Gator studs are manufactured with 8740 material with an added proprietary element and black oxide finished. They are rated at 220,000 psi tensile strength, providing the clamping force required to keep cylinder heads from lifting due to higher combustion pressures. Choose the head stud kit designed for your truck.
( 2 )
$424.99
Replace your worn or ticking lifters with premium-quality valve lifters from Crown Automotive. They're available in a variety of hydraulic styles—such as flat tappet, roller, and lash adjuster. Order the model designed for fitment on your specific vehicle.
( 1 )
$139.99
Mahle Original fasteners deliver the clamping force necessary to seal the combustion chambers, as well as the oil and coolant passages--even at extreme temperatures and pressures. On your next cylinder head reassembly, use bolts designed to exact specifications for the best sealing solution--Mahle Original head bolt kits.
( 33 )
$30.99
—
$134.99
Trans-Dapt Performance remote oil filter relocation kits allow you to move your oil filter to a more accessible location, making filter changes quick and easy. They're available in single or dual filter kits. Dual filter kits double the filtration of your oil system to keep oil cleaner and add an extra quart of oil capacity.
( 79 )
$102.99
—
$151.99
Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.
( 38 )
$80.28
—
$112.40
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 310 )
$105.99
—
$172.99
Lokar's flexible and machined engine dipsticks are designed to coordinate with their flexible transmission dipsticks. The slim design allows for an easy installation inside of your headers to work with OEM and Sanderson cast exhaust manifolds. They have clearance for block-hugger headers or can be applied straight into the engine block (without tube), depending on your application. All engine dipsticks feature an E-Z read aluminum or steel stick for an accurate measurement of engine oil.
( 347 )
$102.95
—
$157.95
Mopar Performance valve springs are made from stronger steel than OEM and are intended for general performance use. They're available for many applications in single and dual versions. And make a great choice for your muscle car.
( 4 )
$13.99
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 251 )
$78.99
—
$90.99
On Sale
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 69 )
$3,927.99
—
$4,357.99
Get oil filtration that's as good as gold with K&N Performance Gold oil filters. Keep your engine free from contaminants as small as 10 microns. They use a resin-impregnated filter media to provide maximum filtering and an inner core to lend extra structural support to the filter, preventing filter collapse. Plus, many of these K&N oil filters have an anti-drainback valve (where applicable) that eliminates dry starts and prevents oil from draining back into the crankcase during engine shutdown. And they're protected by a heavy-duty outer shell that guards against rock and stone damage and provides over 550 psi hydrostatic burst strength. So, if you want golden-level oil protection, then you want K&N oil filters.
( 505 )
$15.99
—
$17.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 133 )
$95.99
—
$208.99
Hayden oil filter relocation kits allow you to relocate your oil filter to a more accessible location, such as in the engine compartment. Hayden manufactures these oil filter relocation kits out of quality materials to ensure performance and durability. Additional oil capacity helps cool internal engine parts providing maximum engine protection.
( 20 )
$82.99
Many installations, particularly oil cooler installations, require the oil filter to be relocated. Earl's has bypass adapters for most spin-on and many bolt-on applications. They're designed to be quick and easy to install.
( 13 )
$82.39
—
$119.95
ATI Super Damper diesel harmonic balancers are designed with absolute precision in mind and are one of the highest quality harmonic balancers purpose-built for Cummins, Duramax, and Power Stroke diesel engines. These dampers eliminate torsional vibration at the crankcase to significantly reduce wear on your engine, as well as allow power to come on much quicker and smoother to balance out the engine. ATI Super Damper diesel harmonic balancers are tunable, serviceable, and SFI-approved!
( 8 )
$518.95
Take up the slack with Dayco No Slack Idler pulleys. These specially formulated glass-filled polymer or steel-bodied pulleys have smoother surfaces and tighter dimensional tolerances for less vibration and longer belt life. They meet or exceed OEM specifications and feature lifetime-lubricated bearings and high-temperature seals to ensure peak bearing performance. Maximum structural integrity and optimal performance mean Dayco value for you. Keep your belts from slacking off with Dayco No Slack Idler pulleys.
( 80 )
$19.99
Mopar oil filters are ready for high performance. They are engineered to meet the demands of your heavy-duty and high-power applications. The the best performance of your vehicle choose genuine Mopar Performance oil filters.
( 5 )
$11.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
