Availability
COMP Cams short travel XD hydraulic roller lifters offer the advantages of both light pre-load and reduced oil volume, producing the most stable and highest-revving hydraulic lifter available. The XD versions feature heavy-duty tool steel pushrod seats. This adds strength and durability in extreme-duty applications, such as turbo drag cars and offshore powerboats. Certain engines respond better to a light lifter pre-load because it recovers more quickly from any bad harmonics in the valvetrain. Others work better with a heavy pre-load because oil volume is reduced under the plunger, which increases lifter stiffness. Now you have the best of both—with COMP Cams short travel XD hydraulic roller lifters. Order the model designed for your vehicle and engine application.
( 4 )
$969.95
COMP Cams XFI NSR Camshafts for Ford 4.6L/5.4L modular 3-valve engines are the first truly "drop-in installation" camshafts ever created for this popular application – striking the perfect balance of performance versus installation difficulty. An excellent alternative to the regular COMP Cams Xtreme Energy Ford Modular camshafts, these 2-staged cam sets require no computer re-tuning; however testing has shown that mild tuning can result in power gains even greater than the normal 25 rear wheel horsepower. These camshafts are fully compatible with the factory variable cam timing (VCT) system and are designed to operate in the stock rpm range.
( 7 )
$1,028.95
COMP Cams introduces another industry first with their Max-Lift BSR shaft rocker systems, a bolt-in bushed shaft rocker system that increases valve train stiffness helping your engine achieve higher levels of performance. By tying all eight rocker arms together on a single shaft that fits in the stock rocker stand, COMP Cams has found a way to improve valve train dynamics, increase valve train stiffness and reduce deflection under extreme loads. The increased valve train stiffness created the BSR rocker system allows your existing cam to act like a larger camshaft by transferring more of the motion to the valve or the use of more aggressive, higher lift cams without losing control of the valve train. Take complete control of your valves with the COMP Cams Max-Lift BSR shaft rocker system.
( 3 )
$774.95
COMP Cams Xtreme Energy modular 2-valve camshafts are specifically created for high-demanding, overhead-camshaft engine configurations. From stock replacements to ultimate performance, there is an Xtreme Energy cam to meet your performance goals.
( 20 )
$838.95
COMP Cams Sportsman solid roller lifters feature premium-quality, high-value components designed for sportsman and professional racing, along with high-end street machines. They're available in both needle-bearing and bushing configurations. Each design features two pressurized EDM oil feeds, as well as an edge-orifice feed to the wheel. This delivers a more reliable oil feed than most competing options. COMP Cams Sportsman solid roller lifters are also designed with a shallower oil band than competitors' versions for increased strength and rigidity, while internal machining helps to reduce weight. The body utilizes a skirted wheel that strengthens the lifter ears, and the skirt also provides more contact area with the lifter bore for further lifter stabilization. In addition, staked axles eliminate clips and provide robust axle retention. This feature increases the stiffness of the lifter ears and helps to prevent the ears from spreading. The COMP Cams Sportsman solid roller lifters are built from 8620 premium steel for increased strength and wear resistance and they feature a captured, stainless steel link bar design. The lifters also utilize a tapered and slotted link bar tower for reduced weight and improved aesthetics. Choose the size and options tailored for your engine application.
( 9 )
$888.95
—
$941.95
COMP Cams Ultra Pro Magnum rocker arm upgrade kits include Ultra Pro Magnum rocker arms, guide plates, rocker studs, adjusting nuts, and set screws. These kits are designed to fit under the stock valve covers without machining. Build up your engine with COMP Cams Ultra Pro Magnum upgrade kits.
( 1 )
$784.95
COMP Cams Thumpr NSR modular 3-valve camshafts for Ford 4.6L/5.4L engines deliver an aggressive "thumping" exhaust idle and generous power gains in the middle and upper rpm range. They will turn your Ford 3-valve engine into a performance machine with a minimum of installation difficulty; they only require the addition of COMP Cams cam phaser limiter kits and computer tuning. These cam phaser limiter kits safely modify the factory variable cam timing (VCT) system, allowing for the use of aggressive camshaft lobe technology without sacrificing the benefits of the VCT. Choose between three unique cam designs—Thumpr, Mutha' Thumpr, and Big Mutha' Thumpr. Each delivers excellent horsepower gains and broad torque curves for your musclecar.
( 3 )
$1,028.95
COMP Cams short travel hydraulic roller lifters have been engineered from a patent-pending design that specifically performs at higher engine speeds. They're designed to limit the lifter's internal piston as it is pumped up. By limiting that movement, the COMP Cams short travel hydraulic roller lifters cut down on the loss of power and limit valvetrain failure at higher rpm. The lifters are REM-finished and then black oxide coated for extreme durability, even for those high-revving engines. Choose the size, quantity, and other options tailored for your high performance application.
( 8 )
$781.95
—
$813.95
COMP Cams Thumpr LS camshaft packages come as a complete valvetrain parts package that is matched for specific LS applications and desired performance. COMP Cams engineers have spent countless hours testing and creating valve train component combinations that are perfectly matched for maximum horsepower and dependability, as well as creating that wildly popular Thumpr sound in GM LS applications. Thumpr camshaft packages can add anywhere from 60 to 110 hp (depending on the application). COMP Cams Thumpr LS camshaft packages include: * Thumpr LS camshaft * Pushrods * Valve springs * Retainers * Valve locks * Spring seats * Valve seats
Not Yet Reviewed
$865.95
COMP Cams Tri-Power Xtreme modular 2-valve camshafts have been designed to work with the FAST-FLASH programmers to optimize torque and horsepower and improve fuel efficiency. They are available for late model, fuel injected, computer-controlled engines. These 2-valve camshafts feature a hydraulic roller swinging follower design, work with a standard valvetrain, and require no modifications to install.
Not Yet Reviewed
$854.41
Ford 4.6L/5.4L modular 3-valve engines found in 2005 and newer Mustangs are all the rage. So the question on everyone's mind becomes, "How can I further improve the performance of these powerful engines?" COMP Cams XFI VSR Modular 3V (Valve Springs Required) Camshafts deliver a great power improvement over stock levels. These cams are the next step up from the COMP Cams NSR (No Springs Required) Cams and represent a major upgrade in power production. When compared to the NSR, stock valve spring compatible cam series, the VSR cams offer a substantial power gain in the higher rpm ranges. To achieve this, a high-lift design that requires a COMP Cams Beehive Valve Spring upgrade was created to maximize power within the limits of the OEM unmodified cam phasers. These new VSR camshafts are available for both naturally aspirated and supercharged engines, with two levels available in each series; one designed for maximizing mid-range power and torque, while the other maximizes top end horsepower. The performance secret behind these camshafts is in the extensive dyno testing that allowed them to determine precise cam timing events. Combining these optimized timing events with a high-lift lobe design offers substantial improvements in both power and throttle response. Designed to work flawlessly with the factory VCT, which is programmed to retard the cam timing above 4500 rpm, the new COMP Cams XFI VSR Ford 4.6L/5.4L Modular 3V Cams optimize both mid and high rpm performance.
Not Yet Reviewed
$1,028.95
The COMP Cams XFI SPR Ford 4.6L/5.4L modular 3V (Springs & Phaser Mods Required) camshafts are the best way to achieve the most power and torque increases possible with the popular Ford Modular 3V engine. These designs are the next step up from the COMP Cams VSR (Valve Springs Required) cams. When compared to the VSR cams, the SPR cams offer additional mid-rpm power increases as well as substantial power gains in the higher rpm ranges. In addition to increases in horsepower, you can also expect another 800-1000 rpm of useable engine speed and an awesome sounding idle lope to match. To achieve this extra level of performance, lobe profiles and timing events were specifically designed to work with the factory variable cam timing (VCT) system cam phasers for all 2005 and newer Ford Modular 3V engines. These cam phasers were modified with the required COMP Cams Cam Phaser Limiter kit to restrict their movement to no more than 20 degrees. This simple modification gains additional piston to valve clearance, allowing for much larger cam designs. This results in cams that not only maintain low and mid-range power, but have incredible high rpm performance as well, all while maintaining the benefits of cam phasing. As noted by the COMP Cams engineering staff during extensive dyno testing, these camshafts provided the biggest power and torque improvements of any cam series they've ever tested in the Ford Modular 3V engine.
( 1 )
$1,028.95
COMP Cams LST Series hydraulic roller camshafts deliver "Low Shock Technology." These LST camshafts feature lobe profiles designed to maximize horsepower, while improving stability at higher rpm. They're also easier on the valve springs, enhancing durability and reducing load loss. From street durability to track power, COMP Cams LST Series hydraulic roller camshafts are an awesome choice for your build. The cams are available for a variety of engine, piston, and engine applications.
Not Yet Reviewed
$876.95
COMP Cams Endure-X roller lifters set the standard for solid roller lifter technology. The hydraulic roller lifters are designed with oiling and inboard link bars, they're engineered to withstand the demands of aggressive cam lobe designs and increased RPM ranges. The lifters feature a wear-resistant tool steel axle, precision sorted needle bearings, and most applications include EDM oil injection technology that guarantees the bearing assembly receives a constant flow of oil. Endure-X solid roller lifters are heat treated, machined to ultra-high tolerances, and fully rebuildable.
( 40 )
$780.95
—
$833.95
COMP Cams Tri-Power Xtreme camshafts have been designed to work with the FAST-FLASH programmers to optimize torque and horsepower and improve fuel efficiency. They are available for late model, fuel injected, computer-controlled engines. The COMP Cams Tri-Power Xtreme camshafts work with a standard valvetrain, and require no modifications to install.
Not Yet Reviewed
$855.95
COMP Cams Xtreme Energy camshafts employ the latest cam technology to provide maximum performance. Whether your use is off-roading, towing, or street performance, there's an Xtreme Energy cam available for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers—while delivering increased engine vacuum. Hundreds of models are available for fitment on vehicles from 1955 to the present. Select the cam designed for your application.
( 338 )
$971.95
—
$1,067.95
COMP Cams LST Series solid roller camshafts deliver "Low Shock Technology." These LST cams feature lobe profiles designed to maximize horsepower, while improving stability at higher rpm. They're also easier on the valve springs, enhancing durability and reducing load loss. For maximum horsepower with either stock or aftermarket pistons (choose the model suited to your application), COMP Cams LST Series solid roller camshafts are an excellent option for your build.
Not Yet Reviewed
$855.95
Meet your high performance goals with COMP Cams XFI RPM high-lift cam and lifter kits. The cams are designed to increase horsepower and extend the rpm range of your engine. COMP Cams matches them with a set of performance lifters just right for the cam, so you can reap the benefits of a power engineered system. Designed for applications where a high lift is necessary, these COMP Cams XFI RPM high-lift cam and lifter kits have the power to not only meet your performance goals, but exceed them.
Not Yet Reviewed
$785.95
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 273 )
$823.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
