Availability
Showing In Stock Items. Show All 51 Items.
Clearance
USA Standard Gear spider gear sets offer OEM-quality at a low price. They're available in dozens of configurations for applications from 1955 and up. Depending on the kit you choose, your selection may include all or a combination of side gears, pinion gears, spider gear thrust washers, cross pin shaft, cross pin bolt, and/or roll pin. Restore the performance of your differential with the quality of a USA Standard spider gear set.
( 16 )
$205.99
—
$329.99
$105.50
—
$180.50
Summit Bucks
Clearance
Keep your FWD/AWD front axles perfectly aligned with ACDelco replacement axle housings. Cracked or warped housings can lead to excessive transmission or wheel bearing wear, as well as damage the axle splines. Order the model recommended for your application.
( 1 )
$304.99
$214.50
Clearance
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 51 )
$128.99
$104.50
Clearance
Motive Gear master ring and pinion installation kits include everything that's in their regular differential kit—plus pinion shims, carrier shims, and ring gear bolts (where applicable). You also have the option of upgrading to higher quality bearings by adding "T" to the end of the part number on some models. Make a better choice for your ring and pinion installation with Motive Gear differential master bearing kits. Order the model designed for your vehicle application.
( 338 )
$170.99
$113.50
Clearance
USA Standard Gear ring and pinion sets are high-quality and precision-machined replacements. They're offered for a wide variety of common and hard-to-find applications, differential case designs, and ratios. The right choice adds confidence to your install; select the USA Standard ring and pinion set recommended for your vehicle.
( 49 )
$300.99
—
$353.99
$187.50
—
$241.50
Clearance
USA Standard Gear master overhaul kits have everything you need to properly rebuild the differential in your vehicle. They let you finish your ring and pinion gear installation or axle rebuild with confidence. These install kits offer a lower price alternative when costs must be kept down. Most USA Standard Gear master overhaul kits include: * Pinion bearings and races * Pinion shims * Carrier bearings and races * Carrier shims * Crush sleeve (if applicable) * Slingers (where used) * Pinion seal and nut * Ring gear bolts * Cover gasket or gasket maker (RTV) * Marking compound with brush * Thread locker
( 31 )
$377.99
$241.50
Clearance
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 318 )
$383.99
—
$422.99
$228.50
—
$244.50
Clearance
Spicer Drivetrain Products rear axle shafts feature application-specific design and engineering, quality materials, precision manufacturing processes, and statistically-controlled testing. Through induction heat treating with a slower scan rate, Spicer delivers more consistent and stronger axle shafts. In addition, the cold-formed rolled spline eliminates the need for machining, which can cause stress fractures and premature failures. The Spicer Drivetrain rear axle shafts are available in a variety of styles, configurations, and options to fit your specific rear axle type.
( 51 )
$163.99
$117.50
Clearance
What kind of hidden performance does your vehicle possess that's ready to be unleashed? Spicer Drivetrain Products differential carriers supply the power for you to find out! You can increase your off-road traction, maintain streetability, and get ready to rock and roll in your truck or Jeep with the selection of carriers offered by this legendary manufacturer. Spicer goes above and beyond so your rig can do the same! Order the model and options recommended for your vehicle.
( 37 )
$297.99
$207.50
Clearance
SKF Bearings wheel bearing and hub assemblies are premium parts produced using high-quality steel and surface finishes, premium seals, factory-grade sensors, precision manufacturing techniques, and strict assembly tolerances. They're 100 percent tested to the actual OE specifications for fit, form and function. SKF bearing assemblies are easy to install, pre-adjusted, and lubricated for life. Plus, SKF offers the broadest range of hub bearings and kits in the aftermarket. SKF wheel bearing and hub assemblies provide everything you need in one box to complete your install. Depending on the model selected, your kit may include bearing and flange, axle nut, circlip, O-ring, seal, or other parts. Order the assembly designed for fitment on your vehicle application.
( 67 )
$196.99
—
$290.99
$136.50
—
$183.50
Clearance
Motive Gear ring and pinion gear installation kits include high-quality components to complete your project. Depending on the axle application, the kits can include: a cover gasket, pinion shims, carrier shims, crush sleeve, pinion seal and nut, and ring gear bolts. Some kits also come with marking compound and a brush. To ensure proper fitment, order the installation kit designed for your specific axle model.
( 48 )
$212.99
—
$273.99
$101.50
—
$152.50
Clearance
FAG USA wheel bearing and hub assemblies are compact, lightweight, maintenance-free hubs. They combine the cost-effectiveness and proven performance characteristics of other bearings with the convenience of an integral mounting flange for mounting brake, disc, and wheel. Fischer Aktien-Gesellschaft (FAG) has been around for over 100 years and part of the automotive industry for more than 50 of them. Put your trust in proven manufacturing and components with FAG USA wheel bearing and hub assemblies, available for hundreds of applications.
( 11 )
$151.99
—
$231.99
$108.50
—
$166.50
Clearance
SKF Bearings hub bearing kits are specifically designed with premium components based on SKF's many years of wheel end technology. All the parts needed for the wheel hub repair are included, so you have less downtime and faster service. Components are made from heat-treated high carbon steel for superior strength and SKF's "sealed for life" design ensures problem-free operation. For your vehicle, get the quality you can count on from SKF hub bearing kits.
Not Yet Reviewed
$166.99
$100.50
Clearance
BCA Bearing by NTN wheel bearing and hub assemblies are premium OE-quality units with application-specific design and engineering for reduced noise, vibration, and harshness, as well as extended life. BCA Bearing by NTN wheel bearing and hub assemblies will include one of their superior Gen 1, Gen 2, and Gen 3 hubs—high-quality wheel end replacement parts for domestic and import vehicles.
( 10 )
$165.99
—
$230.99
$100.50
—
$134.50
Clearance
Mopar Replacement automatic transmission solenoids are genuine OE-replacements. That means your Chrysler, Dodge, Plymouth, or Jeep will receive the perfect part to repair and/or restore performance, just as it should be. These solenoids are made from quality materials to provide reliable, long service with the right fit, function, and value. Control the flow of automatic transmission fluid with Mopar solenoids. Order the model designed for your vehicle application.
( 2 )
$240.99
$121.50
Clearance
Yukon Gear & Axle spider gear kits offer better performance for your differential. Utilizing high-quality materials and better-than-OE design, Yukon spider gears get you through turns with the traction that you need. The kits are available in a variety of carrier styles and are compatible with dozens of axle models, front and rear. Improve your differential with the addition of a Yukon Gear & Axle spider gear kit.
( 69 )
$247.99
—
$270.99
$170.50
—
$209.50
Clearance
Zoom MU Series clutches are OEM replacement clutch kits that provide more grip without the stiff pedal of most aftermarket clutches. Matched components are engineered to perform together correctly for maximum durability and performance. Select the model for your application needs. Features: * New OEM computer-tested pressure plate * OEM-style clutch disc with non-asbestos facings built to exceed the OEM specs * New release bearing on some applications * Pilot bearing/bushing * Alignment tool for the perfect clutch installation
( 239 )
$235.99
—
$367.99
$102.50
—
$214.50
Clearance
ATP automatic transmission master repair kits enable you to conveniently rebuild and restore performance. They include everything needed to give your transmission new service life—including clutch plates, gaskets, seals, O-rings, and (depending on your application) they may include an oil filter, bushings, or even a vacuum modulator. If you have transmission work to perform, let the pros at ATP furnish the master repair kit designed for your model.
( 44 )
$234.99
$146.50
Clearance
Alloy USA front axle shafts will uphold your hardcore adventures with strong, premium alloy steel, offering great durability to keep you moving with confidence. These terrain-tested axles are engineered and manufactured using high-tensile strength 4340 chromoly that's heat-treated, tempered, induction-hardened, and CNC-machined and anodized to produce stronger-than-stock axles. Horsepower is useless if you can't get it to the ground. Let Alloy USA front axle shafts help you get dialed-in for the maximum power connection, both on the road and off.
( 1 )
$239.99
$142.50
Clearance
Richmond gear differential carrier rebuild kits include everything you will need to rebuild your differential case—such as spider gears, side gears, thrust washers, cross shaft bolt and pin, and more (depending on kit). These rebuild kits contain precision-machined replacements designed to restore factory-style function. Order the model recommended for your vehicle make and axle application.
( 1 )
$147.99
$120.50
Clearance
Avoid premature failure with Spicer Drivetrain Products differential inner gear kits. Containing the only parts engineered to meet Dana specifications for strength and durability; these kits have everything you need to rebuild your differential case. Forged for longer life in Dana axles, you'll receive spider gears and side gears with shims, as well as the cross shaft and retainer pin. Choose top performance differential inner gear kits manufactured by a legendary name--Spicer.
( 24 )
$195.99
$118.50
Clearance
These Standard Motor automatic transmission control solenoids are designed to replace faulty factory units to keep your transmission shifting smoothly. They meet or exceed OEM specifications and are available for a variety of applications.
( 14 )
$140.99
$116.50
Clearance
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 380 )
$227.99
—
$377.99
$115.50
—
$229.50
Clearance
Add more travel to the short driveshaft on your hot rod. Dorman slip yokes are the perfect solution when you need to move the engine forward or want to get rid of the clunking noise in your driveshaft. Save yourself a lot of time and money by not having to mess with lengthening the driveshaft. These slip yokes are nickel coated steel to resist corrosion—and you'll be amazed at the performance lifespan.
( 8 )
$154.99
—
$181.99
$113.50
—
$146.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
