Availability
Showing In Stock Items. Show All 40 Items.
For the price, no other part can give you the horsepower and fuel economy improvements of Hedman headers. They make Hedman Street headers so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of the headers. Hedman Street headers are available uncoated or in Black Maxx or their polished HTC thermal ceramic coated finishes and, as an added bonus, they also come with all necessary gaskets and mounting hardware. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 2445 )
$262.99
—
$561.99
Hot rodding has always been about taking two or more parts that were never designed to work together and make then work together seamlessly. It is a never-ending effort to shove as much horsepower and torque under a vehicle's hood as possible. Unfortunately, any project can come to a screeching halt when it comes to bolting up a set of headers. Hedman Hot Rodz engine swap headers are specifically designed for non-factory engine and vehicle model combinations. Available in mild steel or stainless with 16-gauge header tubes uncoated and coated. The HTC silver and Black Maxx ceramic-metallic coatings offer superior heat insulation and anti-corrosion properties to protect your "Hedder" investment and retain more heat inside the header tubes for increased exhaust velocity and improved scavenging.
( 69 )
$352.99
—
$454.99
On Sale
Hooker Blackheart Gen III Hemi swap headers are one part of a fully engineered swap system that provides maximum component clearances, ideal drivetrain geometry and clearance for an aftermarket exhaust system. These high-quality long tube Tri-Y swap headers are made from 304 stainless steel and feature 3/8 in. thick flanges, 18-gauge with 1 7/8 in. primary tubes, and 3.00 in. collectors. These swap headers provide clearance to the brake booster, steering shaft, starter motor (both left and right side mounted starters), and provide clearance for several automatic and manual transmission options. This highly engineered swap system eliminates the installation guesswork, and compatibility uncertainty that is common with universal swap parts.
( 2 )
$376.95
Headers are widely believed to be one of the best performance values available today--so why put stock manifolds on your trick ride? After dropping a different engine into your project vehicle, help it produce more horsepower and fuel economy with these specialty and engine swap headers from Hedman. They feature durable 18-gauge steel construction and have thick 1/4 in. flanges for a long-lasting, leak-proof seal. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 183 )
$306.99
—
$499.99
On Sale
Flowtech LS turbo headers improve smooth-flow engine breathing and increase cylinder scavenging effect by providing consistent tubing diameters. Constructed of heavy-duty, 16-gauge stainless steel, they're available in natural, black painted, and ceramic coated finishes. These headers offer 1 3/4 and 1 7/8 in. tubing diameters for increased exhaust flow, increased performance, and improved throttle response. A 3 in. collector provides additional strength and durability.
( 27 )
$290.95
—
$399.95
Shorty headers from BBK will help your vehicle produce an extra 8 to 15 hp. Constructed from mandrel-bent steel tubing with 3/8 in. thick die-stamped flanges, the exhaust units are available in tube diameters to fit a variety of engine sizes. (Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer; this includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc.) If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment.
( 302 )
$399.99
—
$549.99
BBK CNC Series performance headers are built tough enough to handle the stresses of day-to-day driving or off-roading. These exhaust performance upgrades feature CNC mandrel-bent heavy-gauge tubing and laser-cut flanges that ensure long life and they include gaskets and installation hardware. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 81 )
$499.99
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 990 )
$668.95
$299.95
—
$525.95
On Sale
Increase your horsepower and torque with JBA Cat4ward headers! They are designed with 3/8 in. thick laser-cut flanges, mandrel-bent primary tubes, and feature JBA's patented Firecone merge collectors. They're available in either steel or 409 stainless steel and are offered in a chrome plated or high-temperature silver ceramic finish for most applications. JBA includes premium-quality mounting hardware and instructions for the installation and, unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This would include components such as cylinder heads, chassis, steering, motor mounts, body mounts, bushings, etc. If aftermarket components, parts from other applications, or custom-altered parts are used on your vehicle, it is the installer's responsibility to verify fitment.
( 514 )
$463.10
—
$592.00
$416.79
—
$532.80
On Sale
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 703 )
$510.85
$459.76
On Sale
XForce headers look impressive, flow like the mighty Mississippi, and growl out a cadence that makes people stand up and take notice. The unique header design increases power throughout the rev range, while their stainless steel construction guarantees corrosion resistance and a long service life. Choose the style, size, and other options recommended for best performance.
( 30 )
$283.50
—
$359.10
Our Summit Performance® headers are manufactured from mandrel-bent tubing for superior flow and greater horsepower. The headers feature a pressure-formed collector for a better flow rate and a JIG-welded tube-to-flange plate for a perfect fit. They're made for off-road and racing use only. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. The headers are available in a wide range of styles, sizes, and configurations. Order the pair recommended for your application. (Special warning regarding Summit Racing™ painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.)
( 2009 )
$499.99
On Sale
Flowtech shorty headers are just the ticket for those who want the best of both worlds--top performance and a clean machine. They bolt on to your OEM exhaust system, offering real horsepower gains plus increased efficiency. These headers are made from durable 16-gauge tubing; feature TIG-welded, extra-thick 3/8 in. flanges for a leak-free seal, and come complete with premium gaskets and hardware. Plus, Flowtech Shorty headers are available in high heat-resistant black paint, ceramic thermal barrier coating or natural stainless finishes for improved rust and corrosion resistance. Additional features: * Designed as a direct fit replacement for OEM exhaust manifolds * High-flow, mandrel-bent tubes provide consistent tubing diameters for smooth flow and increased exhaust velocity Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Flowtech recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 86 )
$549.95
$302.95
Pacific Performance Engineering replacement high-flow up-pipes allow as much as 53 percent more flow than stock pipes, and they're a direct bolt-on to your factory manifolds. Diesel engines, even stock, produce high temperatures and pressures. OEM up-pipes eventually fail from constant temperature and pressure fluctuation. Unlike factory parts, these OE replacement high-flow up-pipes are manufactured from 11-gauge 304 stainless steel. They include internally-sleeved bellows that can take the abuse of high temperature and high pressure. Order the model recommended for your application.
( 2 )
$269.99
DC Sports race headers are designed to eliminate your catalytic converter for all-out racing applications. They are constructed from mild steel and come available in either 4-into-1 or 4-2-1 configurations, depending on your vehicle application. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
Not Yet Reviewed
$474.99
DC Sports 4-2-1 headers are second-to-none when it comes to performance. They feature a one-piece design for lighter weight and a cleaner look, while maximizing your engine's output to produce the most power available. They're made from CNC mandrel-bent tubing, have specially designed flanges, and are built using the latest TIG/MIG-welded construction. They'll provide you with an increase of up to 10 hp and are available in your choice of polished stainless steel or ceramic coated finishes. Instructions are included. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
Not Yet Reviewed
$427.49
Clearance
Schoenfeld IMCA Modified adjustable headers allow you to choose the best fitment for your open front-wheel racer. These headers have slip-on collectors to adjust for your engine location. The left side collector may be a Style 3, while your right may be a Style 8, and there are several combinations available, making them easy to fit and replace if damaged! Get the fit, quality, and performance you want at a reasonable price with Schoenfeld IMCA Modified adjustable headers, available for a variety of vehicle and engine application. (Special warning regarding Schoenfeld painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high-heat paint or coating designed for use on headers be applied.)
( 3 )
$391.99
$266.50
Big Gun Exhaust Evo R Series head pipes draw on Big Gun's heritage of making power. Offered for various off-road MX and sport ATV models, EVO R is a tried-and-true series that will save weight, add noticeable performance gains, and sound tremendously better than stock. Features: * Precision-bent, TIG-welded, 304 stainless steel head pipe construction * Larger diameter than stock head pipe * Lighter than stock head pipe * Increased horsepower and torque gains
Not Yet Reviewed
$259.99
These Rugged Ridge headers are extra-tough for extreme usage. The flanges are welded 360 degrees to stand up to the hottest conditions! All Rugged Ridge headers come with gaskets. These headers are offered in a choice of materials and applications to best suit your needs.
( 8 )
$479.99
FMF Racing PowerBomb header pipes make your race explosive. These redesigned header pipes are 4-stroke headers that locate the FMF patented PowerBomb module at a precise key location in the system. Increased performance and flow are achieved through the expansion and contraction of exhaust sonics through the system by placing the "bombs" just so they offer an increase in flow of about 10 percent. Plus, they act kind of like a pre-muffler, helping to lower your bike's sound output. Add some power to your race bike with PowerBombs from FMF Racing.
( 4 )
$251.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
