2004 - Customizable - Free Shipping on Orders Over $109 at Summit Racing

Zumbrota Remanufactured Axle Assemblies

Zumbrota Drivetrain remanufactured axle assembles offer reliable performance at a value price. They're available for thousands of applications—from passenger and off-road vehicles, to race cars and pulling trucks. The axle tubes are straightened to OE specifications; the housings are hydro-blasted and rinsed, then tested for surface wear and cracks; and the gear patterns and rolling torque are properly adjusted to ensure optimum tooth contact. Zumbrota replaces all seals, bearings, crush sleeves, pinion nuts, and shims on the front and/or rear axle assemblies. Order the replacement model recommended for your specific vehicle.

4.0 out of 5 stars ( 9 )

$1,026.99

—

$1,495.99

Zumbrota Remanufactured Transfer Cases

Zumbrota remanufactured transfer cases are put through a proprietary cleaning method, and arrive looking like new. But before they ship, each unit goes through complete inspection, component replacement, and quality control process to assure dependable, reliable shift-ability. Zumbrota rebuilds units from New Process, Borg Warner, and other major manufacturers to fill fitments for foreign and domestic passenger cars, trucks, and SUVs. Benefits of Zumbrota remanufactured transfer cases include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All cases are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent replacement of seals, bearings, viscous couplers (when applicable), and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.86 out of 5 stars ( 7 )

$1,075.99

—

$1,431.99

Callies Compstar Crankshafts

You're installing value without compromising quality with Callies Compstar crankshafts. Finished and inspected by Callies, Compstar cranks maintain proper geometry and design. Hardened with deep nitride, They're ideal for all types of abusive racing environments and available in a wide variety of strokes and journal sizes to fit most common cubic inch requirements. All rod journals are drilled and counterweights are profiled for piston clearance. Sometimes you need to race within a budget, but with Callies' consistent grind and polish, as well as their precise stroke and index, you don't need to compromise on quality. Choose Callies Compstar crankshafts--they're better by design.

4.6 out of 5 stars ( 10 )

$1,011.00

FTI Performance SRL-3 Series Billet Triple Clutch Torque Converters

FTI Performance SRL-3 Series billet triple clutch torque converters are designed for engines with some serious power! They're engineered to be locked up under full throttle and can withstand some abuse. The billet lockup piston, triple bearings, and anti-ballooning impeller hub are designed to get the job done. These converters are available in different stall torque ratios and stall ratings to match your engine and transmission combination.

3.86 out of 5 stars ( 7 )

$1,429.00

FTI Performance SRL Series Billet Lockup Torque Converters

FTI Performance SRL Series billet lockup torque converters feature a computer-designed, CNC-machined billet front cover and a billet lockup piston--making premature clutch wear a thing of the past. With custom stator designs and multiple blade angle pumps, stalls are available from 2,800-4,400 rpm. They are custom-built to your exact needs and driving style. With furnace-brazed and heli-welded fins, severe-duty sprague, and anti-ballooning flanged impeller hub, these torque converters are virtually indestructible.

4.06 out of 5 stars ( 18 )

$1,099.00

ATI Fuel & Blown Torque Converters

Nothing is tougher on a torque converter than putting it behind a blown fuel engine. Made for supercharged engines, ATI Fuel & Blown torque converters are designed for the ultimate in high-horsepower holding for big cubic inch nitrous or supercharged engines. They feature a special 22-element sprag with double-cage construction to simultaneously control each sprag element. The sprag sits in concentric races that are heat-treated to 65 on the Rockwell C scale. A specification sheet must be filled out prior to ordering. Please call us at 1-800-230-3030 for further information.

Not Yet Reviewed

$1,499.00

Zumbrota Remanufactured Manual Transmissions

Zumbrota remanufactured manual transmissions are some of the most dependable 5-speed, 6-speed, and transaxle units available. Each transmission is put through tremendous testing and inspections to assure the highest quality possible to use in your vehicle. Benefits of Zumbrota remanufactured manual transmissions include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing * 100 percent replacement of seals, bearings, and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.71 out of 5 stars ( 21 )

$1,245.99

—

$1,458.99

ATI Serpentine Conversion Pulley Kits

ATI serpentine conversion pulley kits contain everything you need to convert your stock 6-rib serpentine belt to an 8 or 10-rib. If you are requesting more boost, causing your 6-rib belt to slip, then these kits are for you. The wider 8-rib belt gives you more belt surface, which can create more boost without slippage. ATI also offers a 10-rib kit for those who need even more boost. These conversion kits include a damper, a power steering pulley, a tensioner with a bearing, and an alternator pulley.

Not Yet Reviewed

$1,080.00

—

$1,184.04

Banks Power Ford 1999-2004 6.8L V10 Stinger Systems

Banks Power Ford 1999-2004 6.8L V10 Stinger systems will strengthen your truck's muscle with impressive gains in horsepower and torque. Banks designed these kits to provide you with more hauling muscle. They manufacture the components from quality materials to ensure performance and durability. Kits include the following components: * Ram Air intake system * Stainless steel Dynaflow muffler * Stainless steel 3.5 in. tailpipe * Stainless steel 4.0 in. exhaust tip

Not Yet Reviewed

$1,149.00

—

$1,369.00

The Detail Zone Telorvek Ford 4.6/5.4 V8 Modular EFI Wiring Harnesses

The Detail Zone puts you in control of your Ford wiring job with their Telorvek Ford 4.6/5.4 V8 Modular EFI wiring harnesses. Your 4.6 or 5.4 V8 Modular-powered ride will run like factory with these TDZ fully functional, closed-loop, fully scannable wiring systems. Installation starts with the Telorvek panels--your centrally located link between your engine sensors and computer. Detail Zone supplies all of the correct and necessary connections, terminals, and 20 ft. of fire-resistant wire--no predetermined wire lengths! Not only will you have plenty of length, but all wires are printed with sensor and terminal information, so there's no guessing which is which or where it goes! You'll have no more long hours spent tracing circuits, cutting, or soldering. The Telorvek panel is capable of being used as a breakout box required for diagnostic procedures to take voltage readings of different circuits. Take control of your project for a guess-free install and a trouble-free start-up with The Detail Zone Telorvek Ford 4.6/5.4 V8 Modular EFI wiring harnesses.

5.0 out of 5 stars ( 3 )

$1,156.35

Banks Power Ford 1999-2006 6.8L Stinger Systems

Banks Power Ford 1999-2006 6.8L Stinger systems will strengthen your truck's muscle and durability with impressive gains in horsepower and torque. They're manufactured from quality materials to ensure performance, durability, and more hauling muscle. Kits include the following components: * Ram Air intake with air filter housing * 3.50 in. stainless steel Dynaflow muffler and a tailpipe * 4.00 in. polished stainless steel tailpipe tip

Not Yet Reviewed

$1,149.00

Carrillo Pro-A Connecting Rods

Carrillo Pro-A connecting rods are your choice connection to economical high performance. They offer a lightweight design for high engine speeds and limited cylinder pressures. These tapered connecting rods are crafted from robust forged steel that's heat-treated, shot-peened, and subjected to continuous quality checks to meet their stringent tolerances. On this quest for perfection, Carrillo has created their Pro-A rods with a symphony of precision that will make your engine sing at a price that will have you humming a happy tune. From their design engineers to their craftsmen, from premium materials through the forging process to shipping, they strive to put you in the winner's circle. Do you need rods? Choose Pro-A connecting rods from Carrillo--the people dedicated to creating success.

Not Yet Reviewed

$1,174.96

ATI Super Damper Supercharged Series Harmonic Balancers

These Supercharged series dampers place the powerful protection of ATI Super Damper inside of the crankshaft blower pulley. Available in 66 to 77-tooth 8mm pitch, and 40 to 51-tooth 14mm pitch, these balancers eliminate torsional crankshaft vibrations. These balancers exceed SFI 18.1 specs, have laser-engraved 360 degree timing marks, and are finished in a black zinc chromate. Numerous pulley offsets are available to keep the blower drive as close to the engine as possible, reducing the bending moment to the crankshaft nose.

4.72 out of 5 stars ( 18 )

$1,116.00

Banks Power Ford 1997-2005 6.8L V-10 Class A Motorhome PowerPack Systems

Is your motorhome "shift-happy"? If so, Banks PowerPack systems can give your Ford 6.8L V-10 Class A coach a whole new attitude! With a swift kick of performance, Banks PowerPacks optimize your engine's airflow for increased power, prolonged engine life, and better mileage. The systems include proven bolt-on power adjusters like: Ram Air with a Super Scoop; stainless heat-shielded 5-tube TorqueTube exhaust manifolds—with a patented PowerPickle pulse converter; a low-restriction Dynaflow muffler; and a Monster exhaust with a tailpipe and tip. An OttoMind engine calibration module may be included, depending on the application. All of these components pack the power for all speeds under all conditions with plenty of torque when you need it the most. Plus, they can raise your average mpg by 7.4 percent! You can end the shift-happy behavior of your Ford V-10 motorhome with a Banks Power PowerPack system.

Not Yet Reviewed

$1,497.00

RevMax Stage 4 Billet Triple Disc Torque Converters

RevMax Stage 4 billet triple disc torque converters are designed for those who have heavily modified engines or for those that tow heavy weights. The newest designs incorporate custom-tuned lockup clutch dampers. These dampers soften the application of the lockup clutches while still resisting shudder. This softer apply is much gentler on the input shaft then traditional triple disc converters. These converters work best when paired with their diesel performance valve bodies. All Revmax Stage 4 converters are rated for approximately 700 to 750 horsepower and a maximum 1,500 ft-lbs. of torque. Give your ride the powertrain it deserves with an assist from the RevMax Stage 4 billet triple disc torque converter best suited for your application. More product features, items, and specifications include: * Billet front cover * Triple-disc, high-performance lockup clutch system * Custom-tuned clutch damper assembly * Exclusive custom stator designs and upgraded sprag retainer * Upgraded lockup clutch material and high-performance seals * Upgraded stator billet bearing cap and dual-sided Torrington bearing stator design * 4130 chromoly flanged impeller hub * Lowered internal clearance for maximum fluid coupling * 4340 hardened turbine hub and splines * Furnace-brazed impeller and TIG-welded brazed turbine * Torrington high-performance stator and turbine bearings * Computerized robotic sealing welds followed by fully pressurized leak testing * Precision internal clearances set to increase efficiency and improve performance * Rust-resistant high-quality paint * TCRS machine computerized high-speed balancing to less than 5 grams * Runout tolerances of less than 0.005 in.

Not Yet Reviewed

$1,045.00

2004 Parts and Accessories