Selected Filters


Loading...

Availability


2003 DODGE Ignition Components

Part Groups

Results 1 - 24 of 45

On Sale

Holley Sniper EFI HyperSpark Distributor Kits

Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation

4.22 out of 5 stars ( 23 )

$1,024.95


$921.95

Summit Racing™ Volt Max X-TREME Spark Plug Wire/Cap and Rotor Kits

Tune-up your entire ignition at once with Summit Racing™ Volt Max X-TREME spark plug wires, cap, and rotor kits. They're made to handle extreme conditions while perfectly matching OEM specs. The ultra-low resistance wire core is wrapped in a high dielectric capacitance jacket to keep voltage directed to the plug, and is protected by a tough silicone outer jacket. Stainless steel terminals (solid brass for Ford D.I.S. applications) with hardened, positive snap-locks ensure a permanent connection, and the silicone boots can handle up to 450 degrees F of heat. The wire sets include dielectric grease to seal terminals and boots, plus wire separators (a must if your OEM wire are 7mm). Select the tune-up kit designed for your vehicle.

4.69 out of 5 stars ( 153 )

$90.98

Summit Racing™ Distributor Cap and Rotor Kits

Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.

4.39 out of 5 stars ( 390 )

$31.99

COMP Cams Bronze Distributor Gears

Don't ruin your new steel roller cam by running the wrong distributor gear. Install one of these quality bronze distributor gears from COMP Cams. A stock cast iron gear is not compatible with a steel camshaft and can cause serious damage. These bronze gears are machined from AMPCO-45 extruded aluminum bronze with 5 percent nickel. They feature a high-strength tooth design that resists wear, even when used with high-pressure oil pumps.

3.9 out of 5 stars ( 40 )

$91.95

MSD Non-Current Limited Ignition Tachometer Adapters

If you are triggering an MSD Blaster, 5, 6, SCI, or 7 Series ignition with its white wire or points terminal, with a non-current limiting ignition (originally equipped with a ballast resistor) you will need one of these MSD factory ignition module tachometer adapters. They correct the operation of most voltage-triggered tachometers or fuel injection systems that do not work directly off of the tach output terminal of the MSD ignition unit.

4.0 out of 5 stars ( 17 )

$101.95

JMS Chip PowerMAX FuelMAX Fuel Pump Voltage Boosters

You don't need a new fuel pump; you need JMS Chip PowerMAX FuelMAX—the "Boost-A" devices that truly deliver! They provide clean continuous voltage and the highest amperage available to provide maximum power and fuel for your vehicle--up to an 80 percent increase in fuel delivery is possible. PowerMAX FuelMAX voltage boosters feature proprietary enclosures, industrial heat sink, 10-gauge heavy-duty wiring, and either 40 or 80 amp fuses, along with a host of new and innovative features to further improve your experience. Choose from single or dual inputs/outputs, plug-and-play versions, and 3-ways to trigger boosted output. JMS voltage boosters are pre-engineered for use on most Dodge, Ford, GM, and import vehicles—as well as most any others utilizing an electronic fuel pump.

4.38 out of 5 stars ( 8 )

$399.75

MSD Sport Compact Replacement Coils

MSD sport compact coils are direct bolt-in replacements that intensify the spark output of your ignition, helping your air/fuel intake charge burn more completely. The results are smooth idle and improved mid-range power. Installation is a snap--the coils connect right to your factory wiring.

4.71 out of 5 stars ( 38 )

$128.95

Davis Unified Ignition SOS Ignition Coil Packs

Davis Unified Ignition SOS ignition coil packs feature advanced technology to pack more electrifying voltage into them for pure ignition performance. The SOS (Sultans of Spark) ignition coils are designed with increased windings to boost spark output up to 40,000 V! That is a 60 percent increase in spark energy over the 25,000 V produced by the stock ignition coils. The higher voltage, along with an increased spark duration, allows spark plug gaps to be opened up. The larger gap exposes a hotter spark in the combustion chamber for an increased burn of the fuel mixture, resulting in more horsepower and better fuel economy. Davis Unified Ignition SOS ignition coil packs also provide quicker starting, smoother idle, and excellent throttle response. They are direct replacements for the factory coil packs and do not require any special modifications for installation.

4.64 out of 5 stars ( 84 )

$45.99

$375.00

Davis Unified Ignition Screamin' Demon Coils

The little devil in you will enjoy tormenting the competition with Davis Unified Ignition extreme Screamin' Demon coils. They allow you to widen your plug gaps up to a whopping .065 in. You get an intense spark through the entire rpm range to keep you "screaming" down the road without a loss of power. And your spark plugs stay cleaner longer! The brass terminals of these coils are more conductive than stock aluminum and resist corrosion longer, too. Demon coils are hot stuff and you'll need a better-than-stock set of wires to deliver that hotter spark to your plugs. So, turn up the heat on performance with Screamin' Demon coils from Performance Distributors.

4.57 out of 5 stars ( 214 )

$79.99

$199.00

Summit Racing™ High-Output Ignition Coils

Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.

4.5 out of 5 stars ( 377 )

$41.99

$72.99

aFe Scorcher High-Performance Ignition Coils

aFe Power offers Scorcher high performance ignition coils for a wide range of cars, trucks, and vans—including models by Chrysler, Dodge, Jeep, Ram, BMW, Cadillac, Chevrolet, GMC, Ford, Lincoln, Lexus, Scion, Toyota, Audi and Volkswagen from 2000 and up. These premium coils are a direct replacement upgrade over your stock originals. They feature a lower primary resistance than factory coils, resulting in a high energy spark that ensures complete combustion from idle to redline. Scorcher ignition coils keep pace with the demands of higher RPM ranges and at wide-open throttle, always delivering the peak performance you expect. Order the model recommended for your vehicle. Additional details: * Up to 20 percent more spark energy * Increase horsepower and torque * Improved drivability and smoother idle * Easier cold starts * Longer coil life * Available individually or in a set of 4, 6, or 8

4.5 out of 5 stars ( 4 )

$134.00

Mr. Gasket Distributor Hold-Down Clamps

Since you're installing that new distributor, you'll need to hold it down with something. Why not use one of Mr. Gasket's hold-down distributor clamps? Made from heavy gauge steel, these clamps are the perfect way to dress up the engine compartment.

3.54 out of 5 stars ( 28 )

$15.61

On Sale

MSD Street Fire Coils

MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.

4.71 out of 5 stars ( 645 )

$411.95

Cardone New Distributors

Cardone new distributors offer OE fit and form, built better! Cardone has seen where and why parts fail, so their new distributors are built with technology and design—plus, they're 100 percent computer-tested for guaranteed, long-lasting performance. Cardone also knows that a part has to look good, so their distributors are appearance-inspected for complete satisfaction. New distributors include the cap and rotor to make your installation a snap. For quality and reliability backed by nearly a half-century of experience, order the Cardone new distributor designed for fitment on your vehicle.

4.15 out of 5 stars ( 155 )

$89.99

Denso Ignition Coils

Denso developed the auto industry's first compact stick-type ignition coil. The space-saving design of Denso ignition coils requires no high-tension ignition cables, fitting neatly into the engine's spark plug bore. Along with its stick coil technology, other advanced features include micro-sized driver circuits and diagonal inductive windings. That same expertise is put to use on all Denso ignition coils regardless of their configuration. Each Denso ignition coil is designed and optimized for its specific application, then continually improved by Denso's global engineering team. One key to effective combustion in today's low-emission, high-efficiency engines is consistent, high-energy ignition output. Denso direct ignition coils deliver it. Additional features and benefits of Denso ignition coils include: * Integrated driving circuit in the top of the coil * Superior-quality components and materials ensure optimal performance * Tested and inspected to ensure high quality * Diagonal windings eliminate sectioned bobbins, reducing size and weight * Improved coil efficiency lessens the need to generate high voltage * Eliminates phantom misfires * Small in size, light in weight, and easy to install * Provides maximum available voltage under all operating conditions

4.92 out of 5 stars ( 99 )

$29.99

$33.99

NGK Ignition Coils

NGK ignition coils are designed to precisely control the spark intensity, delivering optimum power and the quality you expect from NGK. These replacement coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're easily installed and provide longevity and durability of your spark energy. NGK offers ignition coils as individual replacements or in a Multi-Pak for convenience and to maintain a proper service procedure.

4.48 out of 5 stars ( 61 )

$35.99

$158.99

Summit Bucks

Delphi Ignition Coils

Delphi ignition coils will definitely spark a response! Precise spark timing offers increased fuel economy and faster crank-to-run. These coils provide accurate electrical energy to create a voltage potential at the spark plug—and that provides you with superior engine performance, better control over emissions, and fuel economy. You'll get the OE performance, durability, and electromagnetic capacity level that your vehicle requires with Delphi ignition coils. Order the model designed for your vehicle application.

4.66 out of 5 stars ( 83 )

$20.99

$70.99

On Sale

MSD Blaster OEM Replacement Coils

When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.

4.72 out of 5 stars ( 633 )

$732.95


$488.66

Mopar Replacement Distributor Rotors

Mopar Replacement distributor rotors are genuine OE replacements offering the right fit, function, and peace of mind. The rotors work in conjunction with other ignition components to keep your Chrysler, Dodge, or Jeep firing properly and staring every time. Keep the energy flowing by making the best choices to service your vehicle--Mopar Replacement distributor rotors.

4.0 out of 5 stars ( 4 )

$30.99

Mopar Replacement Ignition Coils

Mopar Replacement ignition coils are genuine parts you can count on to supply the OE fit and function you're expecting. Manufactured from quality materials, Mopar ignition coils will provide the necessary voltage to fire your spark plugs.

4.83 out of 5 stars ( 6 )

$169.99

On Sale

MSD Pro-Billet Dual Sync EFI Distributors

MSD Pro-Billet Dual Sync EFI distributors feature high-quality dual Hall effect sensors, a QPQ coated precision billet shutter wheel, and distributor shaft that's guided by a sealed ball bearing. They also include a race-proven distributor gear, and a performance cap and rotor. The distributors are designed for use with Holley EFI systems; they may also fit other systems requiring a Hall effect sensor. Order the model recommended for your vehicle and engine application. (Note: an ignition adapter is required when Pro-Billet Dual Sync EFI distributors are utilized with Sniper EFI.) Features, specs, and parts may include: * CNC-machined billet aluminum housing * Precision-machined shutter wheel designed for improved accuracy at extreme engine rpm * Plug-and-play with Holley EFI * Can be used to trigger popular TBI fuel injection systems * Hall Effect sensor design provides precise timing control and noise immunity * Integrated LEDs allow for easy setup * Shutter wheel is pinned and welded to distributor shaft for superior reliability

3.82 out of 5 stars ( 17 )

$511.95


$459.95

ARP Ignition Coil Bracket Fasteners

Add a touch of class to your coil bracket installation with ARP ignition coil bracket fasteners. They are available in black oxide finished chromoly or rustproof stainless steel, as well as with a conventional hex head or 12-point. These fasteners are great for tight, hard-to-reach ignition coils.

5.0 out of 5 stars ( 17 )

$35.99

Davis Unified Ignition Cap and Rotor Kits

For great firepower, you need all of the spark that you can get. and Davis Unified Ignitions cap and rotor kits from Performance Distributors will give you every jolt that you need. These quality high performance cap and rotors offer up to 50 percent higher dielectric strength and can handle all available voltage. Manufactured using the ideal resin material to handle any system, these rotors have an improved well design to eliminate burn-through, nylon rotor screws to eliminate a "ground" for the voltage to jump at high rpm, and brass terminals on the cap to give you maximum conductivity. These cap and rotor kits are available in a wide selection, including Vortec applications. Plus, many are available in several color choices. Spark your ride into action with Performance Distributors cap and rotor kits.

4.44 out of 5 stars ( 160 )

$41.75

On Sale

ACCEL Super Coils

ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.

4.53 out of 5 stars ( 808 )

$89.35

$665.95