2003 CADILLAC ESCALADE Parts & Accessories

Melling Performance Oil Pumps

Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.

4.66 out of 5 stars ( 199 )

$155.99

—

$201.99

Powermaster XS Torque Starters

Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.

4.56 out of 5 stars ( 918 )

$249.99

Summit Racing™ Bracket Racer SFI Harmonic Dampers

You don't have to sacrifice safety or quality to save money; our affordable Summit Racing™ bracket racer SFI dampers have been spin-tested to 12,500 rpm and carry an SFI-18.1 rating. The carbon steel dampers have an injection-molded and bonded elastomer, easy-to-read engraved timing marks, removable counterweights (where applicable), and a highly polished baked-enamel finish, so they look as good as they perform.

4.57 out of 5 stars ( 396 )

$228.99

On Sale

MSD 8.5mm Super Conductor Spark Plug Wire Sets

MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.

4.65 out of 5 stars ( 2007 )

$120.95

$108.85

Melling High-Volume Oil Pumps

Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.

4.62 out of 5 stars ( 371 )

$163.99

ACDelco GM Genuine Parts Engine Timing Covers

ACDelco GM Genuine Parts engine timing covers are OE replacements for a variety of applications. The aluminum covers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. The timing cover is an essential component designed to protect the timing belt, timing chain or cam belt of your car from road debris, grime and gravel; timing belts or chains control the rotation of the camshafts and crankshaft in the internal combustion engine. Order the cover recommended for your vehicle.

4.67 out of 5 stars ( 3 )

$118.99

Clevite H-Series Main Bearings

Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.

4.61 out of 5 stars ( 144 )

$123.99

—

$166.99

ACDelco Mechanical Water Pumps

ACDelco mechanical pumps are ideal replacement components for many vehicles on the road today. They're manufactured to meet and exceed OE specifications for fit and performance. The pumps are available in many styles, materials, and other options. Order the model recommended for your application. Features and benefits include: * Available for practically all GM vehicles as well as a wide range of non-GM vehicles * Completely pressure-tested for reliable, leak-free performance * Coated seals support seal longevity and durability * Heat-treated shaft assemblies and impellers provide superior strength and durability * High-quality bearings are permanently sealed and lubricated for greater durability and long life * Uniform wall sections and smooth coolant-flow cavities for efficient operation * Cast iron, aluminum, or steel design, depending on vehicle

4.7 out of 5 stars ( 467 )

$149.99

—

$160.99

King XP-Series Main Bearings

Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.

4.47 out of 5 stars ( 47 )

$115.99

—

$138.99

Summit Racing™ Plastic/Aluminum Radiators

A Summit Racing™ plastic/aluminum radiator gives your engine bay the current cooling update it needs. These units are designed for premium performance, while fitting your vehicle's original mounts, so your ride can have a new radiator without modifications to the brackets and fittings. The radiators are available in various sizes and styles to fit your application. Efficient and economical, Summit Racing™ replacement radiators are an excellent option to restore the cooling performance your vehicle requires.

4.44 out of 5 stars ( 90 )

$158.99

—

$216.99

Motive Gear Ring and Pinion Sets

Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.

4.44 out of 5 stars ( 287 )

$166.99

—

$199.99

Lokar Midnight Series Flexible Braided Stainless Transmission Dipsticks

Lokar's Midnight Series flexible braided stainless transmission dipsticks feature a heat-resistant PTFE rod with a black braided stainless steel cover. The flexible inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting them inside of the headers. They're available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length recommended for your transmission application.

4.65 out of 5 stars ( 81 )

$151.95

—

$176.95

Fel-Pro Conversion Set Gaskets

Fel-Pro conversion set gaskets are ideal for stock rebuilds or street-driven cars and trucks. They include every seal necessary for lower engine work. When combined with a Fel-Pro head set, conversion sets can be used for a complete overhaul. Order the gaskets designed for fitment with your engine type and designation.

4.68 out of 5 stars ( 85 )

$154.99

PowerStop Performance Powdercoated Brake Calipers

PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Performance powdercoated brake calipers are made specifically with the enthusiast in mind. They bolt directly in place of the stock calipers, and they look and perform great behind stock or custom wheels. PowerStop calipers and the brackets are treated with an electrostatic high-temperature powdercoating. The easy-to-clean powdercoating helps to resist rust and corrosion, thus extending their life. They are 100 percent pressure-tested to verify piston operation and prevent any possible leaks from occurring, ensuring that every caliper is inspected for quality and safety. Calipers are expertly assembled using new pistons, seals, slide pins (where applicable), dust boots, bleeder screws, and stainless-steel brake pad abutment clips. High-temperature EPDM rubber dust boots and premium silicone lubricant are used for a smoother operation and an extended life in extreme conditions.

4.17 out of 5 stars ( 746 )

$223.99

—

$243.99

PowerStop Z36 Truck and Tow Brake Upgrade Kits

PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Z36 Truck and Tow brake upgrade kits are recommended for trucks, 4x4s, and SUVs that not only work hard, but play hard as well. They come with everything you need, including premium stainless steel hardware, for an easy, bolt-on installation. The low-dust Z36 Extreme ceramic brake pads are reinforced with carbon fiber to provide severe-duty stopping power without sacrificing everyday drivability. These pads are paired with Evolution drilled, slotted, and zinc plated rotors that keep brake temperatures down by maximizing heat dissipation, critical for those long mountain descents. Whether towing a boat or trailer, hauling for the jobsite, or tackling a tough off-road trail, you'll get an easy and affordable, bolt-on performance upgrade with PowerStop's Z36 Truck and Tow brake upgrade kits. Features and Benefits<ul><li>This complete brake kit has been engineered to handle the added stress of towing, hauling, mountainous driving and lifted trucks</li><li>Proprietary Carbon-Fiber Ceramic Z36 brake pads enhance the strength of a typical ceramic brake pad compound to handle heavier loads</li><li>Stainless-steel pad shims resist the increased temperatures common on heavy duty applications</li><li>Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE</li><li>Drilled & Slotted performance rotors provide maximum cooling</li><li>Bolt-on upgrade for stock brakes, no modifications necessary</li><li>Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant</li><li>Brake rotors, pads & hardware engineered to work together to increase the overall braking power on vehicles with heavier loads</li><li>Rotors are zinc plated for maximum protection against rust</li><li>Buy with confidence from the originator & industry leader of brake kits</li></ul>

4.77 out of 5 stars ( 2806 )

$242.99

Summit Racing™ OE Replacement Alternators

Summit Racing™ offers OE replacement alternators for a wide range of vehicles from 1995 and up. They're designed to fit in the factory location and install easily without any modifications. The alternators are manufactured from high-quality materials that meet or exceed the factory specifications. Available for passenger cars, trucks, SUVs, and vans, these stock-style alternators will eliminate your battery charging problems for good. Order the model recommended for your application.

4.39 out of 5 stars ( 33 )

$160.99

Powermaster OEM-Style High-Torque Replacement Starters

Powermaster OEM-style high-torque replacement starters look like your OE starter, but pack a hidden surprise of high-torque cranking power! How do they do it? Easy--they combine an electric motor that is much stronger than a stock starter, high temp solenoid, and direct drive for serious torque. Hardware is provided for some applications, and some models also come available in a chrome plated finish.

4.35 out of 5 stars ( 468 )

$160.99

—

$238.99

King XP-Series Coated Main Bearings

Give your engine the winning edge with King XP-Series coated main bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote™ nano-composite coating takes protection to the next level without adding any additional thickness! Order the replacement main bearings designed for fitment with your engine. pMaxKote™ provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation

4.5 out of 5 stars ( 8 )

$174.99

—

$193.99

Yukon Gear & Axle Master Overhaul Kits

Yukon Gear & Axle master overhaul kits are what you need for a successful differential rebuilding. All of the high-quality parts that you need are provided to do your job right. Yukon master kits go through extensive research to ensure a perfect fit and hassle-free install utilizing the best components, including Timken bearings and races! Choose from their huge selection of kits to meet your replacement application. Yukon Gear & Axle master overhaul kits may include: * Pinion bearings * Carrier bearings * Pinion seal * Crush sleeve or preload shims * Pinion depth shims * Carrier shims (varies by application) * Gear marking compound and brush * Pinion nut * Baffles and slingers (varies by application) * Gasket and/or silicone * Ring gear bolts (for application) * 20-page instruction manual

4.66 out of 5 stars ( 108 )

$204.99

ACL Performance Race Series Rod Bearing Sets

ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts

4.78 out of 5 stars ( 9 )

$106.99

—

$159.99

ACL Performance Race Series Main Bearing Sets

ACL Performance Race Series main bearing sets deliver everything performance bearings should be by utilizing design, metallurgy, engineering, precision quality control, and of course, years of knowledge and experience. Main bearings feature multi-layered tri-metal copper alloy construction that blends characteristics to provide high strength and excellent seizure resistance. They are manufactured to exact tolerances ensuring a reliable fit and helping to maintain consistent clearances. Main bearings are augmented with extended grooves, as well as other bearing enhancements, like increased crush, bearing eccentricity, and enlarged I.D. chamfers. ACL Performance Race Series main bearing sets are produced in standard and extra clearance versions, with or without friction reducer coating, and with modifications to meet specific build requirements, such as narrowed bearings that permit additional edge clearance when running crankshafts with exceptionally large fillet radii. In the heat of competition proven technology always comes through. The choice for your build should always be ACL Performance Race Series engine bearings. Choose the main bearing set designed for your vehicle.

5.0 out of 5 stars ( 1 )

$157.99

—

$230.99

PowerBond Premium OEM Replacement Harmonic Balancers

PowerBond Premium replacement harmonic balancers offer high-quality for the professional engine rebuilder or shade tree mechanic. Featuring a spheroidal graphite iron casting which is considered near-steel strength material, they use both inserted and pressure-bonded rubber that produces rubber strength that is stronger than competitive balancers. PowerBond Premium replacement harmonic balancers are available for the most popular passenger cars, light commercial trucks, and 4WD applications.

4.55 out of 5 stars ( 215 )

$102.99

ACDelco GM Genuine Parts Fuel Injection Throttle Bodies

ACDelco GM Genuine Parts fuel injection throttle bodies are GM-recommended replacements for your vehicle's original component. It is located on the intake manifold, and contains the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. These true OE fuel injection throttle bodies have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

4.87 out of 5 stars ( 47 )

$176.99

Mr. Gasket Automatic Transmission Oil Pans

These automatic transmission oil pans from Mr. Gasket are stock-depth chrome plated pans. They come complete with a washer and gasket and most have drain plugs.

4.21 out of 5 stars ( 96 )

$129.95

2003 CADILLAC ESCALADE Parts and Accessories