2002 Engines & Components - Free Shipping Savings Central - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

BluePrint Engines 350 C.I.D. Cruiser Fully Dressed Crate Engines

BluePrint Engines 350 c.i.d. Cruiser fully dressed crate engines make an great choice for daily drivers and cruising. These fully dressed engines make up to 18 in. of vacuum and work excellent with power brakes, stock torque converter and stock gearing and they will run on 87 octane fuel. Details and specs: * 341 hp/371 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder Heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners Roller Cam specs: * .477 intake/.471 exhaust * 202 intake/212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Harmonic balancer * Spark plugs * Spark plug wires * Standard rotation long style water pump * Waterneck and thermostat * Fuel pump * Oil pan * Timing cover * Aluminum intake * HEI distributor * 600 cfm carburetor * Dyno test results shipped with engine

4.28 out of 5 stars ( 29 )

$6,199.00

—

$8,199.00

On Sale

Holley Mid-Mount Complete Accessory Systems

Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.

4.61 out of 5 stars ( 106 )

$4,509.95

$1,888.95

—

$4,560.95

BluePrint Engines GM 350 C.I.D. 390 HP Long Block Crate Engines

BluePrint Engines GM 350 C.I.D. 390 HP Long Block crate engines deliver 390 hp and 410 lbs.-ft. of torque. They feature aluminum heads, hydraulic roller cam, cast iron crankshaft, hypereutectic pistons, and a compression ratio of 9.2:1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty

4.08 out of 5 stars ( 12 )

$5,299.00

Summit Racing™ Pro LS Crankshafts

Summit Racing™ Pro LS forged steel crankshafts deliver industry-leading fit, finish, and durability at an affordable price. Order the model recommended for your year/make and engine application. Check out the long list of premium features: * 4340 forged steel * Tested to over 1,200 hp in boosted applications * Core hardened to optimum strength, then tempered to remove stresses * Nitride hardened, which results in less distortion, excellent case depth, and more fatigue life * Profiled counterweights reduce windage * Precision stroke and indexing * Lightening holes are drilled in the rod journals for quicker engine acceleration * Gun-drilled Main Journals for quicker engine acceleration * Each crank is magnetic particle tested to ensure it's free of flaws * Large radius fillets for increased strength, narrowed rod bearings for reduced friction * Straight shot oiling for maximum lubrication just prior to maximum load angle * Maximum journal tolerances of +/- .0001 in. ensure consistent bearing clearance * Micro-polished journals with chamfered oil holes for maximum durability and bearing life * Optimized counterweight placement for reduced twisting at high RPM and ease of balancing * High-quality reluctor rings are installed with precision fixturing * Extra 3/16 in. front keyway for blower cars

4.58 out of 5 stars ( 12 )

$899.99

BluePrint Engines GM 400 C.I.D. 500 HP Dressed Long Block Crate Engines

Dressed for high performance, BluePrint Engines GM 400 c.i.d. 500 hp long block crate engines are not your grandpa's 400! Built by skilled craftsmen, these blocks are assembled with ignition and carburetor, as well as valve covers, oil pan, and timing cover. The most complete crate engine available, they offer you fast, easy installation. And because they're dyno-tested, you can be sure all the components will work together perfectly! BluePrint's GM 400 c.i.d. 500 hp dressed engines feature: * Cast iron block with 4-bolt mains * Compression ratio: 10.3:1 * Forged crankshaft * 5.7 in. connecting rods * 150,000 psi rod bolts * Forged pistons * Hydraulic roller cam * BluePrint aluminum heads with 64cc chamber * Intake manifold dual plane, satin aluminum * Carburetor * Dyno test results shipped with engine * 30-month/50,000-mile warranty

4.25 out of 5 stars ( 12 )

$8,699.00

BluePrint Engines 350 C.I.D. Cruiser Crate Engines

BluePrint Engines 350 c.i.d. Cruiser crate engines make an excellent choice for daily drivers and cruising. These crate engines make up to 18 inches of vacuum and are designed to work with power brakes, stock torque converter, stock gearing--and run great on 87 octane fuel. Get a new engine and bring your ride to life with BluePrint Engines Cruiser crate engines.! More features, products, and specifications include: * 341 hp / 371 lbs.-ft. torque * Compression ratio: 9.2:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.020 in. intake / 1.600 in. exhaust valves * 195cc intake / 75cc exhaust runners Roller cam specifications: * 0.477 intake / 0.471 exhaust * 202 intake / 212 exhaust duration @ 0.050 in. 115-degree LSA (Lobe Separation Angle) Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Oil pan * Timing cover * Dyno tested results shipped with engine

4.56 out of 5 stars ( 9 )

$5,099.00

BluePrint Engines 350 C.I.D. Cruiser Fully Dressed Crate Engines with Fuel Injection

Complete your perfect build with a BluePrint 350 c.i.d. Cruiser fully dressed crate engine with fuel injection. The engine makes up to 18 in. of vacuum and works with power brakes, stock torque converter, stock gearing--and runs great on 87 octane fuel, which makes it excellent for daily drivers and cruising! Three models are available; compare options and select the engine that best fits your needs. Details and specs: * 341 hp / 371 lbs.-ft. * Compression ratio: 9.0:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front / external rear engine balance Cylinder Heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake / 1.60 in. exhaust valves * 195cc intake / 75cc exhaust runners Cam specs: * .477 intake / .471 exhaust * 202 intake / 212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Oil pan * Timing cover * Aluminum intake * HEI distributor * EFI system * Dyno test results shipped with engine

5.0 out of 5 stars ( 4 )

$6,799.00

—

$9,299.00

BluePrint Engines 350 C.I.D. Cruiser Base Crate Engines

BluePrint Engines 350 c.i.d. Cruiser base crate engines make an excellent choice for daily drivers and cruising. These crate engines make up to 18 inches of vacuum and are designed to work great with power brakes, stock torque converter, stock gearing, and run great on 87 octane fuel. Details and specs: * 341 hp/371 lbs.-ft. * Compression ratio: 9.0:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners Roller Cam specs: * .477 intake/.471 exhaust * 202 intake/212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Oil pan * Timing cover • Aluminum intake manifold * HEI distributor • 600 cfm Carburetor * Dyno tested results shipped with engine

4.32 out of 5 stars ( 19 )

$5,799.00

Edelbrock Total Power Package 338 HP Small Block Chevy Top-End Engine Kits

The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.

4.73 out of 5 stars ( 11 )

$2,389.95

Summit Racing™ Forged Crankshafts

Summit Racing™ forged crankshafts offer maximum strength and the best value for your dollar! Our crankshafts are non-twist forged from certified 4340 steel. They are put through several stages of heat-treatment, and then stress-relieved and shot-peened to provide the strength and reliability you demand for your high performance application. Each journal is micro-polished and a .125 in. radius is used for increased strength. Summit Racing™ forged crankshafts help you get the most in value and performance.

4.1 out of 5 stars ( 10 )

$699.50

—

$1,099.99

BluePrint Engines GM 383 C.I.D. 436 HP Fully Dressed Stroker Long Block Crate Engines

Bolt some serious power into your ride with these BluePrint Engines GM 383 c.i.d. 436 hp dressed stroker long block crate engines. These engines are built from the ground up to provide a reliable 436 hp and 443 lbs.-ft. of torque to power your street rod, muscle car or any other project that needs serious power. Each engine is hand-assembled, and precision balanced to ensure it will run smooth and strong for years to come. BluePrint GM 383 c.i.d. 436 hp dressed stroker crate engines include: * 4-bolt main block * New cast crankshaft * Hypereutectic pistons * Chevy heavy beam rods with 150,000 psi bolts * Moly rings * Balanced rotating assembly * Melling high-volume oil pump * Hydraulic Roller lifter camshaft * Heavy-duty double roller timing set * Aluminum cylinder heads * Hardened retainers and springs * Swirl polished intake and exhaust valves * Hardened pushrods * Dual plane satin finish intake manifold * Carburetion * Distributor, plug wires and plugs * Water pump * New valve covers * Brass freeze plugs * Front accessory drive with water pump, A/C compressor, alternator, and power steering pump * Dyno tested—and shipped with results

1.0 out of 5 stars ( 1 )

$8,299.00

—

$10,299.00

On Sale

Summit Racing™ Vortec Cast Iron Cylinder Heads

Deliver power-building airflow to your engine with Summit Racing™ Vortec cast iron cylinder heads. These heads outflow the early model small Chevy heads with wide-open intake runners, efficient combustion chambers, and a high-performance valve job. They are made from a strong cast iron alloy that makes them less brittle than comparable Vortec heads on the market. For performance and great value, select the Summit Racing™ Vortec cast iron cylinder heads preferred for your build.

4.58 out of 5 stars ( 76 )

$649.99

$499.99

Summit Racing™ Cast Crankshafts

Summit Racing™ cast crankshafts are perfect for mildly built street engines or just to replace stock crankshafts that have seen better days. These cast crankshafts are precision-ground and micro-polished to exacting tolerances. Order the Summit Racing™ cast crankshaft in the application that you need.

4.11 out of 5 stars ( 47 )

$279.99

BluePrint Engines GM 350 C.I.D. 260 HP TBI Long Block Crate Engines

BluePrint Engines GM 350 C.I.D. 260 HP TBI Long Block Crate Engines have been tested in a factory-equipped 1987-95 OEM 5.7 truck with factory torque converter, fueling system, and ECU, while using 87 octane fuel. These increased horsepower, replacement long blocks are designed specifically to install in 1987-95 TBI trucks without any tuning or fuel system upgrades required. Recommended spark plugs are ACDelco CR43TS with .035 in. gap. Customers will re-use their existing intake manifold, ECU, and fuel system from '87-95 truck engine. This is an excellent upgrade for your truck, gaining roller cam, 4-bolt main, and horsepower; otherwise retaining stock components, such as torque converter and exhaust. * SPECIFICATIONS: HP and Torque: 260 hp / 342 lbs.-ft. Gain of up to 50 hp and 42 lbs.-ft. vs factory Compression Ratio: 9.1:1 1987-1995 GM Iron Heads Hydraulic Roller Cam Cast Steel Crankshaft Hypereutectic Pistons * BLOCK: NEW BluePrint Block 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Steel Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear * CYLINDER HEADS: 1987-1995 GM Iron Cylinder Heads 64cc chamber 1.94 in. intake/1.50 in. exhaust valves * CAM SPECS: Cam Type: Roller .447 Intake, .459 Exhaust 201 Intake / 208 Exhaust duration At .050 - 117 degree lobe separation * IGNITION TIMING: Controlled by OEM Computer * ALSO INCLUDES: New valve covers Oil pan Timing cover Harmonic Balancer Dyno test results shipped with engine * WARRANTY: 30 month / 50,000 mile * NOTES: Not for use in pollution-controlled vehicles

Not Yet Reviewed

$5,999.00

BluePrint Engines GM 383 C.I.D. 436 HP Dressed Stroker Long Block Crate Engines

Bolt some serious power into your ride with a BluePrint GM 383 c.i.d. 436 hp dressed Stroker long block crate engine. They're built from the ground up to provide a reliable 436 hp and 443 lbs.-ft. of torque to power your street rod, musclecar, or any other project that needs serious power. Each engine is hand-assembled and precision-balanced to ensure it will run smooth and strong for years to come. Three models are available; compare options and order the engine that best fits your needs. Product features and specifications: * 4-bolt main block * New cast crankshaft * Hypereutectic pistons * Chevy heavy beam rods with 150,000 psi bolts * Moly rings * Balanced rotating assembly * Melling high-volume oil pump * Hydraulic roller lifter camshaft * .544 intake / .555 exhaust * 230 intake / 236 exhaust duration at .050 * 110 degree lobe separation * Heavy-duty double roller timing set * Aluminum cylinder heads * Hardened retainers and springs * Swirl polished intake and exhaust valves * Hardened pushrods * Dual plane satin finish intake manifold * Carburetion * Distributor, plug wires and plugs * New valve covers * Dyno tested—and shipped with results

4.79 out of 5 stars ( 62 )

$8,199.00

—

$8,399.00

Chevrolet Performance 5.7L 350 HO 333 HP Turnkey Long Block Crate Engines

The Chevrolet Performance 5.7L 350 HO 333 HP Turnkey long block crate engines are assembled with all-new parts and high-flow heads, giving you more power than just about any production-spec small block ever installed at the factory. Designed, engineered, and tested to stringent Chevrolet specifications, these cast-iron blocks with four-bolt main caps is the foundation for the 350 HO, which is topped with iron Vortec heads fitted with 1.94/1.50 in. valves. In addition, durable rotating assembly has aluminum pistons that deliver a 9.0:1 compression ratio. Chevrolet Performance pioneered their high-performance crate engine half a century ago—and they have never stopped working to offer enthusiasts new and more powerful solutions for their projects. You've got a dream in your garage. Chevrolet Performance wants to help you bring it to life. Tech Specs: * Engine Type: Chevy Small-Block V-8 * Displacement (cu. in.): 350 * Bore x Stroke (in.): 4.000 x 3.480 * Block: Cast-iron with four-bolt main caps * Crankshaft: Nodular iron * Connecting Rods: powdered-metal steel * Pistons: cast-aluminum * Camshaft Type: hydraulic flat tappet * Camshaft Lift (in.): .435 intake / .460 exhaust * Camshaft Duration (@.050 in.): 212° intake/222° exhaust * Cylinder Heads: Vortec iron; 64-cc chambers * Valve Size (in.): 1.940 intake/1.500 exhaust * Compression Ratio: 9.0:1 nominal * Rocker Arms: stamped steel * Rocker Arm Ratio: 1.5:1 * Water Pump: cast iron, long-style * Flexplate: 12.750 in. * Recommended Fuel: premium pump * Ignition Timing: 32° Total @ 4,000 rpm * Maximum Recommended RPM: 5100 * External balance

4.0 out of 5 stars ( 1 )

$8,634.77

Clearance

ATK Marine Rebuilt Long Block Engines

ATK Marine Engines offers premium-quality rebuilt long block engines specifically for boating applications. These engines are designed to deliver maximum performance and long-term durability for your boat. Order the model recommended for your marine application. ATK Marine rebuilt engines include: * Special marine pistons and rings * Special marine camshaft * Marine gaskets * New intake and exhaust valves * New main, rod, and cam bearings * New valve lifters, rocker nuts, and swivels * Heavy-duty double roller timing chains * Cam sprocket * Crank gear * Freeze plugs

4.4 out of 5 stars ( 45 )

$2,997.99

BluePrint Engines GM 383 C.I.D. 436 HP Dressed Stroker Long Blocks with Fuel Injection

BluePrint Engines GM 383 c.i.d. 436 hp dressed stroker long block crate engines with fuel injection will provide you a great foundation to return your vehicle to the performance level you desire. They feature a new one-piece rear main BluePrint engine block with 4-bolt mains and passenger side dipstick. Inside the block is a cast crankshaft and connecting rod rotating assembly, with 10.1:1 compression hypereutectic pistons hung on the end. The full roller camshaft provides .544 intake/555 exhaust Lift with 230 intake/236 exhaust Duration at .050 with a 110 degree lobe separation. Up top is a dual-plane intake manifold with Holley Sniper fuel injection system The engines also include an oil pan, a set of valve covers, and a timing cover to finish them off.

4.9 out of 5 stars ( 10 )

$10,399.00

BluePrint Engines Low Profile GM 383 C.I.D. 436 HP Dressed EFI Long Block Crate Engines

BluePrint Engines low profile GM 383 c.i.d. 436 hp dressed EFI long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared to power up your project. These GM compatible engines are designed with a small diameter harmonic balancer, small cap distributor, and drop base air cleaner for vehicles with low firewall or hood clearance. They are a great choice to replace your tired old factory engine with fuel-injected performance. They are offered with or without front accessory drive kit. Features, specs, and contents: * Horsepower and torque: 436 hp/443 lb.-ft. * Cast iron block * 4-bolt main * 4.00 in. bore * Cast steel crankshaft * 3.750 in. stroke * OEM-type 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Aluminum cylinder heads--64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners * Hydraulic roller cam * .544 intake/.555 exhaust * 230 intake/236 exhaust duration at .050 * 110 degree lobe separation * Holley Sniper EFI, Premium vintage valve covers and air cleaner, aluminum intake manifold, oil pan, timing cover, spark plugs and under header spark plug wires, small cap ready-to-run distributor with tach drive and coil, harmonic balancer * 30 month/50,000 mile warranty

Not Yet Reviewed

$11,399.00

Eagle Street and Strip Rotating Assemblies

Eagle Street and Strip rotating assemblies consist of name-brand quality components for a wide range of engines at an affordable price. These kits feature a crankshaft, pistons, piston rings, rod and main bearings, and connecting rods. Based on your application, balanced assemblies are also available. Order the model designed for fitment on your year/make vehicle and engine application.

4.43 out of 5 stars ( 87 )

$1,236.99

—

$2,666.99

AFR 260cc LS3 Mongoose Cylinder Heads

AFR 260cc LS3 Mongoose cylinder heads are 100 percent 5-axis, CNC-ported, and feature titanium retainers, A356 aluminum castings, and Pac Racing springs. These CARB certified heads require 4.000 in. or larger bore applications on up through 454 cu. in. engines operating at or below 7,000 rpm—and flow over 380 cfm at 0.700 in. lift and are designed primarily for street and strip applications. Other structural features include Air Flow Research's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and thick wall runners provide unparalleled durability. Use of AFR stud girdles and full roller rocker arms are required. When it comes to building power, start with these AFR 260cc LS3 Mongoose cylinder heads.

5.0 out of 5 stars ( 5 )

$3,188.00

ATK High Performance Chevy LM7 5.3L 385 HP Long BLock Crate Engines

With ATK High Performance Chevy LM7 5.3L 385 hp long block crate engines expect big mid to upper end power and a noticeable idle. They were designed to be performance upgrades for a 1999-2007 Chevy truck LM7 or an LS swap in a hot rod. Technical specifications include: * Horsepower: 385+ * Torque: 390+ * Block: GM 5.3L iron LM7 * Bore/stroke: Up to 3.809 x 3.622 * Year range: 1999-2007 * Displacement: 323 c.i.d. * Crankshaft: OEM GM 3.622 in. stroke internally balanced 24 tooth reluctor wheel .857 in. flange * Connecting rods: OE GM forged powder metal 6.093 in. stock bolts * Pistons: Hypereutectic dish * Piston rings: Moly rings * Compression ratio: 9.5:1 compression * Camshaft: Hydraulic roller * Camshaft specifications: Custom grind * Camshaft bearings: Installed and clocked to OEM position * Cylinder heads: OE aluminum 61.15cc 1.89/1.55 * Freeze plugs: Brass installed and sealed * Rocker arms: OE powdered metal 1.7 ratio * Oil Galley plugs: Installed and sealed * Weight: 385

4.93 out of 5 stars ( 15 )

$4,189.99

VEGE Remanufactured Long Block Crate Engines

VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.

3.76 out of 5 stars ( 74 )

$2,224.99

—

$6,554.99

PROMAXX Performance GM 6.5 Diesel Cylinder Heads

PROMAXX Performance designed and developed these cylinder heads from the GM 6.5 diesel casting. They are cast iron direct bolt-on replacements for your 6.5L diesel engine. The assembled heads have straight intake bolt holes in the cylinder head, and will typically use a one-piece intake manifold. Order the model recommended for your Chevy or GMC truck.

4.88 out of 5 stars ( 8 )

$538.00