Availability
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
The legacy continues … and now it is bigger, better, and faster! Built for enthusiasts and professionals, MPV13 is the fastest most sophisticated OBDII interface device to date, and Pro is the new standard. Take advantage of Pro Feature Set capabilities, like standalone data logging and PROLINK+ compatibility (sold separately) already built in. MPVI3 redefines the limits of speed and control with faster standalone data logging and two times the storage capacity compared to the previous generation. Log more runs (faster) and store more calibrations on your MPVI3, all with the convenience of eliminating your laptop from the equation. HP Tuners VCM Suite MPVI3 Credit Pro packages equip you with the most inclusive scanning, logging, and calibration, making them the only tool you need in your toolbox. The MPVI3 connects your vehicle's control modules to HP Tuners' VCM Suite software. You can run complete diagnostics, monitor vehicle performance, read from various vehicle control modules, and more in VCM Suite. Optimize your performance, fuel economy, or whatever your vehicle goals may be in VCM Editor with a multitude of defined parameters. When you are ready, license and tune any vehicle currently supported by HP Tuners with the fastest read and write speeds available. Connect, read, edit, write, drive; HP Tuners VCM Suite MPVI3 Credit Pro packages are offered with or without tuning credits.
( 1 )
$799.91
XS Power RSV Titan8 lithium batteries are designed to maximize capacity and deep cycling abilities. Part of XS Power's Lithium Titanate Oxide (LTO) Series, they have double the amount of storage energy but only half of the instant discharge energy, giving them double the capacity rating, but half of the wattage rating. The built-in 2/0 bussing allows up to four positive and four negative hidden direct connections to each module without the need for any external exposed bussing, while still leaving two easily accessible top terminals and four series or parallel expansion terminals to easily build a bank of nearly any configuration from 12 V, 24 V, 36 V, or any configuration imaginable. XS Power RSV Titan8 BCI direct-fit models are also available.
Not Yet Reviewed
$999.99
On Sale
Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.
( 51 )
$861.84
—
$1,007.33
FiTech presents Ultimate LS standalone ECUs. These self-learning ECUs are offered with and without transmission control. So if you're considering utilizing a factory intake, throttle body, and injectors, FiTech Ultimate LS standalone ECUs will get your engine ready for optimal performance.
( 51 )
$959.00
It's time to outfit your vehicle with a high-quality, high performance ignition system—and these MSD combos from Summit Racing™ make it a breeze! The kits start with a 6A digital CD ignition box, then add a high-efficiency Blaster coil and a Pro-Billet distributor. We finished the combos with a complete set of Street Fire wires to deliver all of that powerful spark! Wake up your street and strip engine with a powerful Summit Racing™ MSD complete ignition combo, available for applications as far back as the 1950s.
Not Yet Reviewed
$1,030.54
The next generation Edge Evolution CTS3 programmers will continue to include all of the great features, benefits, and extended coverage from the CTS2 product line, while adding a sleek, new exterior and cutting-edge screen. The Evolution CTS3s reprogram your vehicle's stock computer through the OBDII port, saves the factory files to easily return to stock, and then uploads the Edge calibrations. They come with multiple power levels custom tuned by a whole team of engineers, and can be installed in minutes without ever popping the hood. Edge Evolution CTS3 programmers greatly increase horsepower and torque, and not only re-tunes your vehicle, they stay mounted in the cab of the vehicle offering real-time, monitoring of vital engine and vehicle data for a complete gauge package. Edge Evolution CTS3 programmers feature: * Most comprehensive, state-of-the-art, multi-gauge/tuner touch screen display on the market * 3rd generation design is faster and more capable than ever * Power levels designed for daily driving, towing, performance, and extreme * Simple installation just plug into OBDII port--no wiring required * Monitor key vehicle parameters like transmission temperature, boost, rpm, and dozens more * Full color, 5 in. capacitive touch screen with auto-dimming * Offers crystal clear data at your fingertips * Highly customizable gauges and backgrounds * Boot-up directly to gauge screen upon key cycle * Swipe capability allows easy switching between screens as needed for towing, performance, economy, etc. * Built-in performance meter measures 0 to 60, mile times, and more * Advanced integrated data logger with export capability * Ability to add vehicle licenses to tune multiple vehicles with one product * Clear and read DTC codes * Wi-Fi updateable
( 13 )
$799.95
Painless Performance EFI harnesses are designed for the 1998-2002 LS1 mechanical throttle body engines using a 1999 and up LS1/LS6 ECM with a 4L60E/4L65E automatic or T56 manual transmission. These engines were found in 1998-2002 Camaro and Firebird. These GM LS1/LS6 harnesses will also work on 1997-2004 Throttle-By-Wire (TBW) LS1/LS6 engines which have been changed to mechanical throttle body or any 1999-2006 (4.8, 5.3, and 6.2) Vortec truck engine which has been changed to a factory or aftermarket LS1 intake manifold, mechanical throttle body, and injectors.
( 1 )
$769.98
March Performance alternators combine reliable amperage with stunning good looks. They are available in a choice of amperages and finishes, including polished, chrome, and black, for Ford, GM, and Mopar applications. These one-wire alternators look great in any engine compartment and provide the power you need. Additional features of March Performance alternators include: * Easy-to-connect * High-quality neoprene-sealed bearings for long life * Ultra-low cut-in voltage regulator maintains amperage at low idle speeds * High-tech rotors and stators, built with higher copper and steel content, deliver the greatest output with the best reliability * Pulley and nose cover sold separately (most models)
( 60 )
$883.99
Tru Trac billet alternators from Billet Specialties are designed for use with their Tru Trac serpentine kits. These beautiful alternators feature CNC-machined billet aluminum housing and a 140 amp, 1-wire hookup. Each of these units includes a Proof-of-Performance tag.
( 5 )
$793.95
Granatelli Motor Sports ignition system combo kits feature Granatelli's patented 0 ohm wires with extremely low resistance that maintain very high noise suppression. They transmit the full electrical energy of the ignition source to the spark plugs. The end result is increased horsepower, torque, and fuel economy. Order the kit recommended for your vehicle and engine application. Product details: * Direct replacements exceed OEM specifications; OBD-II computer safe * Increase power to the spark plugs up to 400 percent over stock * 0 ohm resistance, no RFI/EMI interference thanks to patented protector ring * Works with all street and race fuel injection systems * Solid stainless steel connector cables and snap-lock spark plug connectors * High-temperature silicone boots; 8mm jackets with fiberglass-reinforced braid resist temperatures up to 500 degrees F * Ideal for use with aftermarket headers or turbocharger systems * Includes all necessary hardware
Not Yet Reviewed
$878.75
These Edge Comp modules maximize engine efficiency by monitoring the rpm, timing, turbo boost pressure, and fueling parameters. The modules use this information to determine and control both fueling and timing enhancements for the Bosch fuel injection pump. Timing and fueling enhancements are controlled via CAN-BUS through the Data Link and by connecting directly into the Bosch fuel injection pump. The Edge Comp modules feature five power levels with power gains ranging from 40-120 hp. Each of the five power levels has an independent 5-level adjustable responsiveness setting, providing for a total of 25 levels of adjustability! The responsiveness settings enable you to dial-in the optimum balance between responsiveness and low-boost smoke control, no matter what additional power modifications have been made to the engine. The Comp modules are fully adjustable on the fly, and mount inside the cab.
( 1 )
$779.95
Granatelli Motor Sports Malevolent coil packs deliver nearly twice the voltage as the competition. Rated at up to 85,000 V, these nasty little units not only increase power to your plugs, but improve fuel economy, throttle response, and idle characteristics. Malevolent coil packs are bred of a one-piece design that offers you a direct OEM replacement with simple plug-and-play installation—and they won't void your factory warranty! Increase your engine efficiency with improved combustion, powered-up though the intense-performing Granatelli Motor Sports Malevolent coil packs. Order the individual pack or set recommended for your vehicle and engine application.
( 15 )
$753.11
—
$832.91
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 402 )
$825.95
The 6-Mod Ignition Controller was originally developed for the 4.6 and 5.4-liter modular motors that were fed through a carburetor rather than an electronic fuel injection system. However, with the useful options that the 6-Mod provides, such as two rev limits, a step retard and easy control over the timing, the EFI people wanted a way to take advantage of the adjustment. The harness kit provides a splice-free installation of the MSD 6-Mod Controller to factory equipped EFI vehicles making installation a snap. All of the connectors plug directly to the factory units so there is no cutting or splicing of your factory wires. Once installed, the 6-Mod allows users to advance or retard the factory's timing curve, program a step retard for use with nitrous systems or even map out a timing curve through a laptop by using MSD's Pro-Data+ software.
( 4 )
$899.95
MSD Pro-Billet Ready-to-Run marine distributors are the perfect upgrade for boats that are relying on worn-out breaker points or weak ignition systems. These distributors feature a powerful ignition module built into the billet aluminum housing. That means no extra ignition box is needed! This module produces a stout inductive spark that will improve combustion of the fuel mixture for better drivability. Beneath the durable bolt-down injection-molded cap, a maintenance-free magnetic pickup produces accurate trigger signals, while an oversized shaft is guided by a sealed ball bearing. An easy-to-adjust mechanical advance allows you to custom-tailor a timing curve to match your application. Their Ready-to-Run design makes installation a breeze. Simply drop one in the engine, connect three wires—and you're ready-to-run across the lake! All distributors are equipped with flame arrestor holes in their CNC-machined aluminum housings, and are supplied with a cap, rotor, gear, and weathertight wiring harness.
( 16 )
$799.95
Jesel Pro Series distributor drive kits are ideal for naturally aspirated engines. They feature Gates PowerGrip HTD belts and use Moroso Ultra Series distributor components. The balanced brass rotor tip and form-staked carbon ball on the coil lug have been designed to eliminate grounding paths and crossfiring. Jesel belt-driven distributor systems are direct bolt-on accessories to their camshaft belt drives, eliminating timing inaccuracies due to camshaft deflection and cam walk. By driving the distributor drive directly off the camshaft pulley, ignition timing stays constant and will not deviate from the initial settings. Plus, Jesel Pro distributor drives provide the ability to set the engine back further in the chassis without worrying about firewall or windshield interference.
( 1 )
$815.00
On Sale
Juice up your rig with Attitude from Edge Products! Plus, get the added value of the new CS2 monitor! Edge Juice with Attitude CS2 programmers control the timing and duration of injector firing for your rig to deliver maximum performance, improved drivability, and better fuel economy. These plug-in modules are easy to install and come with factory-style connections. You'll be driven with on-the-fly adjustability and monitoring capabilities at your fingertips. You can monitor vital engine data, enhance your towing performance, and customize your Attitude to fit that of your own with the included Mystyle software. You control your rig's attitude with the right juice--Edge Juice with Attitude CS2 programmers.
( 2 )
$1,049.95
HalTech's Elite Premium universal wire-in harness is ideal for dedicated race cars, engine swaps, and custom wiring jobs. Each harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your HalTech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! * Color-coded and labelled wires match the detailed wiring diagram for a confusion-free construction process * The wiring diagram is accompanied by the full ECU manual and software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration * Includes: Firewall grommet, molded 6 power circuit HalTech fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits
Not Yet Reviewed
$940.00
On Sale
Standard Motor accelerator pedal sensors indicate the position of the accelerator pedal by converting pedal movement and position into electrical signals. These sensors are direct replacements for the factory components.
( 49 )
$939.99
$845.99
Jesel Extreme Series distributor drive kits were introduced in 2011, and are designed to handle the high cylinder pressures experienced in Pro Stock and Pro-Mod type engines. They feature MSD 5 in. Pro-Caps to ensure accurate spark delivery, as well as to reduce spark scatter frequently experienced in high cylinder pressure applications. Jesel belt-driven distributor systems are direct bolt-on accessories to their camshaft belt drives, eliminating timing inaccuracies due to camshaft deflection and cam walk. By driving the distributor drive directly off the camshaft pulley, ignition timing stays constant and will not deviate from the initial settings. Plus, Jesel Extreme distributor drives provide the ability to set the engine back further in the chassis without worrying about firewall or windshield interference.
( 2 )
$890.00
On Sale
Bully Dog ECM diesel tuners are designed to be stowed away after installation--simply set 'em and forget 'em. These powerful controlling devices are preloaded with three high performance, dyno-proven tunes that increase horsepower, torque, and fuel economy. They're built with simple, easy-to-use performance in mind, and can also read and clear diagnostic trouble codes. Give your rig the ability to tackle any challenge along the route with Bully Dog ECM diesel tuners. Features and specs: * Idle shutdown timer sets length of time vehicle will idle until the engine turns off to save fuel and extend the life of the turbo by allowing it to cool down before engine shutoff * Increase and decrease the set limit of the vehicle's cruise control saving time and money when crossing borders. * Speed limiter can be adjusted to automatically limit engine power * 75 to 100 hp gains possible in power mode * Free internet updates help assure that you always have the latest files for your vehicle * Fuel savings up to 12 percent and longer engine life * Adjustable options vary for each vehicle and are not available on all vehicles
( 1 )
$849.00
$764.10
HP Tuners Introduces VCM Suite MPVI4 Credit Pro packages, the latest evolution of their industry-leading OBDII interface. Built for professionals and enthusiasts alike, the computer programmers connect your vehicle to VCM Suite software (5.2+) for faster, smarter, and more powerful tuning and diagnostics than ever before. With upgraded hardware, expanded connectivity, and future-ready Wi-Fi capabilities, the MPVI4 redefines what's possible in performance calibration and data acquisition. Models are available with 0, 2, 4, 6, or 8 credits. HP Tuners VCM Suite MPVI4 Credit Pro packages feature: * Improved standalone logging: the most powerful device yet, capable of delivering standalone logging performance on par with VCM scanner and a wired connection * Upgraded hardware architecture: New internal processor for improved data throughput and flashing performance; 30x more memory than previous generation MPVI3 * High-speed USB-C connectivity: Faster, more reliable communication with your PC and vehicle * Bluetooth 5.2: Seamless wireless connection for scanning, logging, and TDN support * Wi-Fi ready (future update): Wireless VCM Suite connectivity coming soon * Enhanced storage and efficiency: Increased onboard memory for robust logging sessions * Improved OBDII fitment: A revised, tapered design means a more secure connection and better compatibility with even more makes/models * Built-In Pro feature set: Standard on every MPVI4, enabling standalone data logging and external sensor integration with PROLINK+ * RGB status LEDs: Clear visual indicators for power, connection, and activity status * Cross-Platform Compatibility: Works with VCM Suite (5.2+), TrackAddict, and RaceRender
Not Yet Reviewed
$799.91
Granatelli Motor Sports Pro Series coil packs exceed your OEM expectations with increased performance. Pro Series 60,000 V coils provide more volts than factory and are intended for those running high compression engines and small nitrous kits. These coil packs increase horsepower and improve mileage and throttle response; plus, they are OBD-II computer safe. Thanks to Granatelli patent protected isolator rings, there's no RFI/EMI interference and 0 ohm resistance. Get incredible output with a set of Granatelli Motor Sports Pro Series coil packs.
( 5 )
$814.86
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
