Availability
Showing In Stock Items. Show All 44 Items.
Stifflers driveshaft safety loops are engineered to exceed NHRA regulations. These one-of-a-kind driveshaft safety loops will save you and your investment from the destructive effects of a broken driveshaft. Quick and easy bolt-in application requires no drilling or welding for a no-hassle installation. Stifflers driveshaft safety loops will work with most automatic and manual transmissions, so you can launch hard with confidence! Stifflers driveshaft safety loops feature: * Lightweight, but strong design * Works with aluminum driveshafts and most aftermarket exhausts * Powdercoated for long life * Complete with all hardware * Includes spacer plates to maintain correct driveshaft angle (where applicable)
( 10 )
$119.95
—
$149.95
Wrap yourself in even more cabin protection, these Competition Engineering 10-point roll bar strut kits are the partner package for the 10-point roll bar main hoop kits. They include the two rear struts, two front door bars, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 joint gussets. These combined with the main hoop kit give you the surrounding protection of a 10-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 3 )
$184.99
—
$437.99
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 140 )
$334.95
—
$874.95
Summit Racing™ driveshaft safety loops do one thing—they retain your driveshaft if a universal joint or other drivetrain component decides to break. These bolt-on safety loops are made of heavy-gauge steel, available in fully adjustable or fixed designs, depending on the application. Summit Racing™ driveshaft safety loops also meet NHRA requirements. Choose the model designed for fitment on your particular vehicle.
( 150 )
$41.99
Make your race car track-safe with Allstar standard roll cage kits. They include all of the bars--1 3/4 in. diameter mild steel tubing and .095 in. wall--to form a protective cocoon. Roll cage kits have driver doors with four curved bars, and a "Z" type right side door and gussets are included. Fast lap times are great, but a safe car, hopefully, lets you walk away to race another day. Reinforce your racer with Allstar standard roll cage kits.
( 17 )
$114.99
—
$419.99
Available for many makes and models, Alston Racing 4-point roll bars are computer bent using 1 5/8 in. mild steel or 4130 chromoly. Alston Racing 4-point roll bars are built specifically for each vehicle and come complete with floor plates and instructions. Please note: cutting, notching, and welding are required to complete the installation.
( 13 )
$249.00
Are you running a 12.99 or better in the quarter-mile? If so, then you need BMR Suspension driveshaft safety loops. U-joint failure can have serious consequences, and these safety loops will keep your driveshaft from flying off or dragging. Most styles may be bolted or welded into place and do not require drilling. BMR's steel driveshaft safety loops meet the requirements set by the NHRA—and provide peace of mind so you can focus on the race. Choose the style and finish for your application.
( 43 )
$44.95
—
$159.95
UMI Performance driveshaft safety loops are NHRA-legal and will bolt-in with minimal modifications. They're a must for tracks requiring safety loops on cars running faster than 13.99 in the quarter-mile. Constructed entirely from 0.250 in. thick mild steel, the loops have CNC-machined mounting points for a superb fit, and are fully MIG-welded for outstanding strength. They are available in different styles, covering hundreds of applications from 1964 and up.
( 41 )
$169.99
Building your protective race bubble begins with one of these Competition Engineering 8-point roll bar main hoops. Made from your choice of chromoly or mild steel, these strong one-piece hoops mount easily with minimal welding, reinforcing the cabin safety through increased rigidity. This type of modification is required on most racing circuits for improved driver protection. In order to install a complete roll cage, you'll also need the appropriate strut kit (sold separately)--or save time by simply ordering the complete roll bar hoop and strut assembly package. Match your vehicle to the support bars needed to ensure a secure cockpit design.
( 38 )
$95.99
In the event of U-joint failure, Competition Engineering universal driveshaft loops will contain your driveshaft. Made of mandrel-formed 1.25 in. O.D. x .083 in. wall mild steel tubing, these kits offer a lightweight, weld-in alternative to bolt-on types. The driveshaft loop portion is a bolt-on design, for easy removal of the driveshaft.
( 24 )
$169.99
Dragsters and hot rod racers attain speeds between 200 and 300 mph, so every safety precaution can spare you from serious injury or worse. Competition Engineering 8-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including sport compacts and models from AMC, Chrysler, Dodge, GM, and Ford. Competition Engineering 8-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 8-Point Roll Bar Main Hoop Kit, which includes the main roll bar hoop * 8-Point Roll Bar Strut Kit, which includes a main hoop crossbrace, two front door bars, two rear struts, two diagonal hoop supports, six weld joint gussets, and eight 6 in. by 6 in. by 1/8 in. thick steel mounting plates * Complete instructions for a hassle-free installation
( 37 )
$407.98
In the event that a yoke or a U-joint fails, Allstar Performance driveshaft loops will contain your driveshaft. These safety accessories are a small price to pay for peace of mind. They're offered in a variety of styles and finishes for bolt-on or weld-on installation. Some models are also adjustable. Order the loop that best suits your application.
( 49 )
$44.99
When seconds count in the event of a fire, make sure that you have quick and easy access to your on-board fire extinguisher. The special design of these Rugged Ridge fire extinguisher holders incorporates thick, nylon web adjustable straps with a hook and loop fastening system to secure your fire extinguisher to the roll bar until needed.
( 18 )
$23.99
—
$35.99
Rhodes Race Cars Lemons and Chumps roll cages are specifically designed for those of you looking to compete in 24 Hour of Lemons and ChumpCar Series races. RRC has taken out all of the guess work and come up with these easy-to-install kits. All the tubing is pre-bent and notched for ease of installation. Rhodes Race Cars Lemons and Chumps roll cages are available in ERW mild steel, DOM, and chromoly. ERW mild steel is accepted by both sanctioning bodies, but DOM is very strongly recommended. Chromoly is generally NOT recommended for this type of racing. Check your sanctioning body's rules before you order! Note: Some minor trimming may be required during installation. All RRC cages are weld-in cages.
( 4 )
$574.95
—
$999.95
If you're going to be running 10.99 seconds or quicker in NHRA, you must have at least a 10-point roll cage. If you currently have an 8-point roll bar installed, one of Competition Engineering's 10-point roll bar conversion kits will upgrade your 8-point bar to a 10-point cage. These weld-in kits consist of a top hoop, which attaches to the front of the existing roll bar and follows the perimeter of the roof, plus two supports for the front of the top hoop. Both the top hoop and the supports are made from rugged, 1 5/8 in., 0.134 in. wall, computer mandrel-bent, mild-steel tubing. Even if you aren't required to have a 10-point cage, upgrading your existing 8-point bar will add protection, as well as chassis stiffness that can translate into better reaction times.
( 6 )
$225.99
SafeTBoy 3-point retractable push button buckle lap belts offer safety every time your buckle up. These modern over-the-shoulder belts feature heavy-duty OEM-style fabric in a large selection of colors fitted with an easy-to-operate, push button-style buckle. SafeTBoy retractable buckle belts are CAD-designed and engineered to fit comfortably across your waist, and then smoothly return to their place when unbuckled. SafeTBoy belts are FMV-approved, and provide the security and protection you need in your vehicle.
( 78 )
$195.50
—
$399.50
Rhodes Race Cars SCCA, NASA, and Drift roll cages are made specifically for hobbyists and for serious racers looking to compete in SCCA, NASA, or Formula D events. All road race cages feature a main hoop diagonal and dual door bars (can be made into dual X-bars). They are weld-in cages and feature notched tube ends (where applicable) for ease of installation. Roll cages are offered in these materials: * 1 5/8 in. O.D. 0.134 in. wall ERW mild steel tubing * 1 5/8 in. O.D. 0.120 in. wall DOM tubing * 1 5/8 in. O.D. 0.083 in. wall 4130 chromoly tubing DOM tubing is very strongly recommended; ERW cages will most likely NOT pass tech inspection for most classes. Chromoly is not recommended by most sanctioning bodies. Due to different requirements for specific classes and weights, you should check with your track or sanctioning body for specific guidelines prior to purchase. It is the installer's responsibility to assure that a cage meets race organization rules as to tubing material and sizes, fit, placement of components, and welding. Note: Because of differing driver sizes and main hoop locations, roof hoop and windshield down bars are not notched. Some minor trimming may be required during installation.
( 2 )
$574.95
—
$999.95
Schroth Racing QuickFit harnesses are a great solution for dual-duty cars. You drive your car on the street during the week and at the track on the weekends—so versatile safety equipment is essential. QuickFit harnesses anchor to factory points, take advantage of the factory seat belt pre-tensioner, and feature ASM technology that keeps the lap belt low and you firmly planted in the seat. Your airbags will deploy as intended when buckled in; and when the weekend's over, the harnesses can be completely removed, giving you full use to carry people or cargo. Schroth Racing QuickFit harnesses are a safe answer to transform your daily driver into a weekend warrior. Order the model designed for your specific vehicle application.
( 1 )
$389.00
Rhodes Race Cars roll cage conversion kits are designed to convert your existing roll bar into a 10, 12 or even 14-point roll cage. RRC conversion kits meet or exceed the NHRA and IHRA requirement for roll cage tubing. These kits include roof tubes, windshield post runners, and dash crossmember. Conversion kits may be available in any of the following materials: * 1-5/8 in. x .134 in. wall mild steel tubing * 1-5/8 in. x .120 in. wall DOM tubing * 1-5/8 in. x .083 in. wall 4130 chromoly tubing Note, because of differing driver sizes and main hoop locations, these kits are not notched!
( 6 )
$294.95
—
$414.95
Allstar Performance offers main hoop assemblies for your standard or deluxe roll cage kits. Solidly built and reasonably priced, these high-quality steel assemblies are your foundation to protection. Allstar knows that your roll cage is serious equipment. When you need to replace it, make the right choice with Allstar main hoop assemblies.
( 4 )
$83.99
—
$218.99
Rugged Ridge Elite fire extinguisher holders keep your fire extinguishers ready to use in a moment's notice. Setting the standard for both form and function, Elite holders are made from billet-style cast aluminum, finished in a durable textured black powdercoat—and equipped with a stainless steel spring-loaded release mechanism for easy one-hand access. Rugged Ridge Elite fire extinguisher holders are designed to work with most 2.5 lb. round extinguishers, and can be mounted directly to a roll bar tube or to any flat surface with the included hardware.
Not Yet Reviewed
$84.99
Rugged Ridge roll bar cover kits dress up your vehicle's roll bar with lightweight foam and summer soft goods fabric. These covers easily install using zippers and hook-and-loop attachments. Special cutouts for seat belt locations make the covers look streamlined. The kits are available for Jeep models from the 1970s and up. Order the cover set designed to fit your application.
Not Yet Reviewed
$214.99
SafeTBoy 3-point retractable airplane buckle lap belts offer safety every time your buckle up. These modern over-the-shoulder belts feature heavy-duty OEM-style fabric in a large selection of colors fitted with an easy-to-operate, aviation-style flip buckle. SafeTBoy retractable buckle belts are CAD-designed and engineered to fit comfortably across your waist, and then smoothly return to their place when unbuckled. SafeTBoy belts are FMV-approved, and provide the security and protection you need in your vehicle.
( 13 )
$195.50
—
$399.50
On Sale
A broken U-joint or driveshaft can cause heavy damage to the underside of your vehicle, sending the driveshaft flying, or allowing the driveshaft to drop down and dig into the pavement, flipping you over. Heavy steel Lakewood driveshaft safety loops can prevent all that by containing the driveshaft after a failure, allowing you to make a controlled stop with minimum drama.
( 7 )
$83.45
$45.90
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
