Availability
Replace your cracked and worn body mount bushings with Crown Automotive body mounting kits. They come complete with bushings, tubes, and retainers. These are natural rubber bushings that will not give a harsh ride like polyurethane bushings do.
( 24 )
$120.99
—
$177.99
Getting adequate fuel to your engine is paramount to achieving the performance you're looking for. Crown Automotive fuel rails deliver the volume you need for your Jeep's engine. Built from stainless steel, these rails are built to precise tolerances for maximum performance and longevity. Crown Automotive is the go-to company for premium-quality factory replacement parts for Jeeps.
( 26 )
$163.99
Crown Automotive offers a wide selection of axle bearings to meet your application needs. They have bearings for the front and rear that will keep your axles spinning without resistance. Whether you need just a bearing or a complete bearing and seal kit, Crown Automotive has the quality choices to get your project revolving.
( 32 )
$9.99
—
$91.99
If it weren't for axles, the wheels on your vehicle wouldn't be moving anywhere. When those all-important parts twist, break, or have other difficulties, simply replace them with Crown Automotive direct-fit axle shaft assemblies. These assemblies are available for numerous axle types, such as CV-style, C-clip, front inner and outer, and bolt-in. While some replacement axles use hardened 4340 chromoly shafts, most are designed and steel-built to OEM specs for reliability and fitment. Each axle is engineered for its particular location and differential. Crown direct-fit assemblies cover many models of vehicles.
( 95 )
$93.99
—
$294.99
Missing some body parts? Crown Automotive will make your Jeep whole once again! Their fender flares are molded from heavy-duty black ABS plastic. They are available in sets and kits to redress your whole rig and include hardware. Only need one? They are also offered individually to use with your existing hardware. Preserve your Jeep's good looks with new replacement fender flares from Crown Automotive.
( 29 )
$42.99
—
$154.99
Crown Automotive clutch fork pivot balls allow for the adjustment of the release fork height when the clutch assemblies are changed. An improperly aligned clutch fork can increase the amount of pedal throw required to release the clutch. The surface where the pivot ball and clutch fork meet should be round, without any flat spots. These replacement parts from Crown are a direct fit for your Jeep.
( 5 )
$8.99
When your control arms begin to wear out, they can adversely affect the rest of your suspension system. And a clunky, vibrating vehicle can be unbearable to drive. Crown Automotive replacement control arms are manufactured from heavy-duty steel or cast iron for long-lasting durability. They're available in a variety of styles—some with a ball joint and/or bushings included. The control arms are offered for more than a dozen positions on your vehicle. Order the model recommended for your application.
( 21 )
$29.99
—
$424.99
You can correctly adjust your speedometer when you change tire size or axle gear ratios with speedometer gears from Crown Automotive. These gears correct the tooth count to maintain the proper reading on your speedometer. They are factory-quality and easy to change out. Crown Automotive offers a large line of electrical replacement parts for Jeeps.
( 5 )
$36.99
—
$83.99
Counter vibrations with Crown Automotive harmonic balancers. With these dampers attached, destructive torsional vibrations will be reduced, and this will help extend the life of your crankshaft. Crown has a selection of OE-fitting replacements made of iron and powdercoated. There is a lot of power and torque produced under the hood of your vehicle and Crown Automotive harmonic balancers will keep it all safely under control.
( 23 )
$55.99
—
$78.99
Stay comfortable in frigid weather. Crown Automotive heater cores feature the same design as the original Jeep cores to ensure accurate fit, form, and function. With a properly operating heater core, you can be warm when the mercury plunges and see clearly out of your windshield on colder days.
( 1 )
$73.99
—
$109.99
Crown Automotive spider gear kits will help renew your turning performance. These differential gear sets are precision-made from quality materials to once again enable your vehicle to turn with ease. Spider gears, side gears, washers, and other parts that may be included in your kit selection will mesh together perfectly to create rotation inside of your differential and spin your wheels at different speeds. Restore smoother turning by installing Crown spider gear kits.
( 11 )
$99.99
—
$249.99
Steering knuckles are the core of a vehicle's front axle. They attach to the suspension components, contain the wheel hub or spindle, hold the front wheel on the car, and let you change direction. Crown Automotive steering knuckles are constructed of cast iron for durability and lasting service. They are available individually or in a set with both left and right replacement knuckles.
( 11 )
$75.99
—
$170.99
When pinion yokes become damaged or you're just looking to upgrade your differential, Crown Automotive replacement pinion yokes are a direct fit for ease of installation. Crown Automotive is a premier manufacturer and distributor of quality replacement parts for Jeep, Dodge, Plymouth, and Chrysler vehicles, in particular.
( 7 )
$53.99
You're just about to conquer a tough, rocky, tire-dropping section of trail when, "BAM!"—the U-joint grenades and takes out an ear on the yoke. Thankfully, you came prepared with Crown Automotive driveshaft yokes so you can make the repair and keep on riding. These yokes are designed and built to OEM specs for excellent fit and reliable performance. Whether you are hot rodding on the street or on a trail ride, always be prepared with Crown Automotive yokes.
( 30 )
$39.99
—
$75.99
Crown Automotive manual transmission input bearing retainers are heavy-duty steel retainers built to replace parts, which are prone to suffer oil starvation at slightly deficient oil levels. Retainers often get worn or damaged due to being in constant motion any time the engine is running. Worn or defective retainers may create excessive noise, which continues as long as the engine runs. A severely worn input shaft bearing can cause the transmission to slip out of gear while moving. So, don't wait; go with Crown and travel with peace of mind.
( 6 )
$66.99
If any of the buttons on your steering wheel don't work or you have an airbag warning light, look to Crown Automotive steering column clock springs for the solution. These rotary electrical connectors allow your vehicle's steering wheel to turn 360 degrees without breaking the electrical connection between the airbag, horn, radio, and cruise control buttons, and your electrical systems. Crown replacement parts will restore your steering wheel's electrical connections.
( 78 )
$105.99
—
$128.99
Crown Automotive fuel injectors supply optimum fuel efficiency for your engine. These quality components deliver maximum spraying action to give your ride the power it needs when it needs it most. The units are available for a wide range of vehicles—including many Jeep and Mopar family models. Give your vehicle a "shot" at peak performance with Crown Automotive fuel injectors.
( 4 )
$67.99
—
$94.99
Crown Automotive crankcase vent tubes will help remove unwanted gases and maintain performance of your engine. They are made from premium materials, are direct-fit replacements, and are available for several Jeep models. Remove gases effectively and ensure your engine operates efficiently with Crown crankcase vent tubes.
( 2 )
$35.99
Driving without clear vision endangers not only your safety, but the safety of surrounding drivers as well. However, Crown Automotive replacement rear view mirrors will fix that problem. These mirrors are designed to fit factory specifications, so there's no need for any adjustments or modifications to your vehicle, making installation a breeze.
( 10 )
$37.99
—
$40.99
Crown Automotive pitman arms convert the angular motion of your drag link and can correct that sloppy steering issue. These are direct-fit parts made from durable steel material, making them perfect replacements for your worn-out steering components.
( 20 )
$25.99
—
$48.99
Crown Automotive rocker arm hold-down bolts are high-quality steel bolts made to fit specific applications. These pivot bolts are used to secure your rocker arm shafts when the old bolts break, become corroded, or have damaged threads. Crown Automotive is a leader in replacement parts for many vehicles.
( 6 )
$2.99
Crown Automotive clutch fork return springs will provide OE fitment and function. The proper movement and pressure of your clutch components depend on the many springs involved. No matter which throwout fork or lever springs you need for your classic rig or newer ride, Crown can help keep your clutch in optimum operation for smoother shifts. Choose your replacements from the selection of Crown clutch return springs for improved performance.
( 17 )
$2.99
Most cars with an HVAC system use blower motor resistors to control the speed of the fan. If the resistor becomes corroded, the lower speed settings may stop working or the fan will not work at all. Replace your Jeep's resistors with Crown Automotive OE quality parts.
( 1 )
$19.99
—
$96.99
Crown Automotive rocker arms are direct-fit OE-style replacement parts for your Jeep. Rocker arms are designed to open and close at precise moments to allow the engine to run efficiently at all speeds. If you need rocker arms, then you need Crown Automotive parts. They are developed to deliver optimal performance and can withstand today's driving challenges.
( 9 )
$13.99
—
$131.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
