Availability
COMP Cams is bringing the muscle car sound back, and it's nastier than ever! Let's face it--few things serve to grab our attention at a car show or cruise night more than a car with a thumping, high performance idle. In an ongoing quest to provide you with the performance and sound you demand, COMP Cams engineering team proudly introduces the Thumpr Series cam and lifter kits. The lobe profile and grind characteristics of these Thumpr camshafts use a combination of an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize the rough-idling characteristics of the cams. This gives you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. Thumpr camshafts are available in different grind profiles; each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range. Thumpr Series cam and lifter kits deliver a substantial power increase over an identical hydraulic flat tappet grind without sacrificing reliability or ease of maintenance.
( 212 )
$589.95
COMP Cams Xtreme Energy cam and lifter kits are built to take advantage of the latest cam technology and provide maximum performance. Whether your use is off-roading, towing, or street performance, there are Xtreme Energy options available for you. By using an aggressive lobe profile, they provide better throttle response and more top-end horsepower than equivalent kits from other manufacturers, while delivering increased engine vacuum. Order the model designed for your vehicle and engine application.
( 386 )
$305.95
—
$1,152.95
Keep your valvetrain running smooth. COMP Cams High Energy hydraulic roller lifters are for use with the newly designed hydraulic roller cam series, or as performance replacements for stock hydraulic roller lifters. You must be certain that the lifters are correct for the type of block used.
( 73 )
$38.95
—
$300.95
One way to increase power is to increase lift. That's what makes COMP Cams Magnum roller tip rocker arms so popular. They're one of the highest lift rockers you can get outside of racing. And, along with the lift, you also get a ball pivot roller tip to prevent valve stem and guide wear.
( 290 )
$24.95
—
$217.95
A car with thumping, high performance idle is sure to grab your attention. COMP Cams is bringing the muscle car sound back, and it's nastier than ever with their Big Mutha' Thumpr hydraulic flat tappet cam and lifter kits. With the meanest sound in the Thumpr line, Big Mutha' street/strip kits produce a very rough idle. And you can rest assured that the aggressive muscle car attitude of your Thumpr-equipped car will be backed up by proven horsepower performance. The kts include camshaft, a set of matched lifters, assembly lube, decals, and instructions.
( 15 )
$390.95
Designed for hot street/strip cars, COMP Cams Magnum Series cam and lifter kits require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these Magnum hydraulic cam and lifter kits provide maximum top-end performance for your high performance car.
( 140 )
$305.95
—
$638.95
Designed specifically for high performance street and race engines, COMP Cams Ultra Gold ARC Series aluminum rocker arms are precision CNC-machined to strict tolerances. They incorporate modern technology and design features to create the most advanced aluminum rocker arms available. Proven to withstand extremely aggressive spring pressure, the COMP Cams Ultra Gold ARC Series aluminum rocker arms use their CNC-machined aluminum design for high quality and the ultimate in ratio accuracy.
( 112 )
$50.95
—
$688.95
Increase your street machine's gas mileage and powerband performance! COMP Cams High Energy cam and lifter kits are designed for street engines with an 8:1 to 9:1 compression ratio. They also work well with all stock components, including intakes, exhaust manifolds, and carburetors. These kits offer good increases in both gas mileage and power throughout the rpm range for most street applications.
( 184 )
$305.95
—
$521.95
COMP Cams LSR Series hydraulic roller camshafts feature modern lobe profiles that take full advantage of high-flowing late model GM LS3 rectangular port cylinder heads. They are tailored for a specific rpm range and usage, from torque to high-rpm horsepower. Give your Chevy LS3 engine a shot in the arm with one of these COMP Cams LSR Series hydraulic roller camshafts.
( 26 )
$541.95
COMP Cams Thumpr LS Master camshaft packages come as a complete valvetrain parts package that is matched for specific LS applications and desired performance. COMP Cams engineers have spent countless hours testing and creating valve train component combinations that are perfectly matched for maximum horsepower and dependability, as well as creating that wildly popular Thumpr sound in GM LS applications. These packages can add anywhere from 60 to 110 hp (depending on the application). COMP Cams Thumpr LS Master camshaft packages include: * Thumpr LS camshaft * Lifters * Timing gear set * Pushrods * Valve springs * Retainers * Valve locks * Spring seats * Valve seats
( 8 )
$1,288.95
COMP Cams Pro Magnum hydraulic roller lifters are specifically designed to perform at higher engine speeds. When engines are equipped with a hydraulic roller camshaft, high rpm is limited by the improper positioning of the internal piston, as the lifter inevitably "pumps up." This improper location results in broken valves and, therefore, leads to lost power or sometimes even engine failure. These lifters offer a distinct advantage over standard high performance hydraulic lifters, especially in race applications where a hydraulic lifter must be used.
( 34 )
$41.95
—
$322.95
COMP Cams retrofit trunnion kits for GM LS Series engines are designed to convert stock LS Series rocker arms into captured roller trunnions for high-rpm race applications. They include rocker arm trunnions, bearings, and retaining rings for a complete installation. Keep your valvetrain reliable throughout the entire rpm range with one of these GM LS rocker arm bearing upgrade kits. Kits include: * 16 rocker arm trunnions, LS-type retrofit * 32 rocker arm bearings, LS-type retrofit * 32 rocker arm retaining rings, LS-type retrofit * 16 bolts for LS trunnion kit * 2 washers for pressing trunnions
( 105 )
$184.95
—
$222.95
COMP Cams short travel XD hydraulic roller lifters offer the advantages of both light pre-load and reduced oil volume, producing the most stable and highest-revving hydraulic lifter available. The XD versions feature heavy-duty tool steel pushrod seats. This adds strength and durability in extreme-duty applications, such as turbo drag cars and offshore powerboats. Certain engines respond better to a light lifter pre-load because it recovers more quickly from any bad harmonics in the valvetrain. Others work better with a heavy pre-load because oil volume is reduced under the plunger, which increases lifter stiffness. Now you have the best of both—with COMP Cams short travel XD hydraulic roller lifters. Order the model designed for your vehicle and engine application.
( 4 )
$179.95
—
$969.95
Because all roller cam lobes are ground flat instead of tapered, like hydraulic or solid cams, COMP Cams provides a means of holding the cam back to the rear of the engine. Their cam buttons ride between the front of the timing gear and the back of the front cover and can be shimmed for proper endplay of the cam. COMP Cams makes solid nylon buttons and roller bearing thrust buttons for the ultimate in performance.
( 109 )
$15.95
Tune your camshaft timing with COMP Cams adjustable cam gear sets. Your 2 and 4-valve engines have the capacity to make horsepower, but the factory timing gear setup can keep you from accomplishing your goals. COMP Cams adjustable cam gear sets provide up to 12 degrees of camshaft advance or retard, install just like the original factory gears, and work with OE timing chains. The sets feature both a steel hub and a steel outer gear for heightened durability and light weight. The ability to adjust the cam timing is important when your performance engine modifications are completed. Get the most from your engine with COMP Cams adjustable cam gear sets.
( 6 )
$341.95
COMP Cams C5-R IWIS Race timing chains are serious direct-replacement options for stock, single LS chains. These high performance chains are the same as those used in Corvette Racing C5-R engines. They feature specially coated pins that resist wear and corrosion, while increasing their integrity and strength; plus, they've been pre-stretched and heat-treated to avoid further elongating or bursting that can cause timing errors and internal engine damage. From street to hardcore track and endurance racing, these top-of-the-line COMP Cams C5-R IWIS Race timing chains upgrade your LS application with reliable performance at the highest standards.
( 1 )
$131.95
COMP Cams Evolution Series hydraulic roller lifters with Hydraulic Cartridge Technology (HCT) are revolutionary patented tappets. A combination of a self-contained hydraulic cartridge within a thick-wall lifter body and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter on the market. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market today. Startup noise is greatly reduced, and a precision-controlled bleed down rate ensures excellent performance at high RPM. The cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. The patented HCT tappets are a completely new design that was developed specifically by COMP Cams to meet the demanding performance and durability required for modern street and performance street engines. The HCT and proprietary manufacturing processes of these lifters ensure precision and longevity that exceed any lifter on the market. Other features include increased duration and lift to the camshaft and two oiling features. Another industry first is the fact that the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild lifters in his or her own garage. Order the Evolution lifters recommended for your year/make and engine application.
( 12 )
$40.95
—
$726.95
COMP Cams XFI RPM cam and lifter kits are designed to provide an excellent increase in your ride's performance. Featuring the newest and quickest lobe profiles, these kits are tuned for use in EFI applications, where the extra airflow signal through a carburetor is not required. COMP Cams XFI RPM kits include matching lifters for the ultimate in performance. These kits are great for use with aftermarket cylinder heads.
( 5 )
$1,254.95
Utilizing years of valvetrain design experience, the latest FEA stress analysis technology, and an exhaustive testing regiment (dyno and Spintron), COMP Cams engineering team left no detail to chance. Everything from casting techniques to valve spring clearance was scrutinized to ensure that Ultra Pro Magnum rocker arms not only lived up to the lofty standards of their predecessor, but also took stud mount rocker performance, stability, and value to a whole new level. The most noticeable advancement centers around their nearly unbreakable investment cast 8650 chromoly body. The arched, web-like design delivers a nearly 29 percent increase in strength and rigidity, while reducing the moment of inertia and optimizing the dynamic balance. The resulting rockers maximize lift and valvetrain control at high rpm. The increased retainer and valve spring clearances of the new design enable the use of large-diameter valve springs, retainers, and locks, without clearance or fitment issues. The new black oxide exterior finish offers a distinctive appearance, along with long-term corrosion resistance. The COMP Cams Ultra Pro Magnum rocker arms feature an oversized trunnion and precision-sorted needle bearings designed for use with high-load valve springs. These unique rockers also feature hardened roller tips for reduced friction and elimination of the valve stem "side loading" that causes premature valve guide wear.
( 202 )
$45.95
—
$595.95
COMP Cams introduces another industry first with their Max-Lift BSR shaft rocker systems, a bolt-in bushed shaft rocker system that increases valve train stiffness helping your engine achieve higher levels of performance. By tying all eight rocker arms together on a single shaft that fits in the stock rocker stand, COMP Cams has found a way to improve valve train dynamics, increase valve train stiffness and reduce deflection under extreme loads. The increased valve train stiffness created the BSR rocker system allows your existing cam to act like a larger camshaft by transferring more of the motion to the valve or the use of more aggressive, higher lift cams without losing control of the valve train. Take complete control of your valves with the COMP Cams Max-Lift BSR shaft rocker system.
( 3 )
$774.95
COMP Cams Xtreme Energy modular 2-valve camshafts are specifically created for high-demanding, overhead-camshaft engine configurations. From stock replacements to ultimate performance, there is an Xtreme Energy cam to meet your performance goals.
( 20 )
$838.95
COMP Cams Sportsman solid roller lifters feature premium-quality, high-value components designed for sportsman and professional racing, along with high-end street machines. They're available in both needle-bearing and bushing configurations. Each design features two pressurized EDM oil feeds, as well as an edge-orifice feed to the wheel. This delivers a more reliable oil feed than most competing options. COMP Cams Sportsman solid roller lifters are also designed with a shallower oil band than competitors' versions for increased strength and rigidity, while internal machining helps to reduce weight. The body utilizes a skirted wheel that strengthens the lifter ears, and the skirt also provides more contact area with the lifter bore for further lifter stabilization. In addition, staked axles eliminate clips and provide robust axle retention. This feature increases the stiffness of the lifter ears and helps to prevent the ears from spreading. The COMP Cams Sportsman solid roller lifters are built from 8620 premium steel for increased strength and wear resistance and they feature a captured, stainless steel link bar design. The lifters also utilize a tapered and slotted link bar tower for reduced weight and improved aesthetics. Choose the size and options tailored for your engine application.
( 9 )
$154.95
—
$1,310.95
COMP Cams NSR drift hydraulic roller camshafts are designed for substantial bolt-in power increase—over 90 hp in some applications! They help you avoid costly breakdowns and early retirement of your LS engine by maintaining Spintron-proven valvetrain stability up to 7,500 rpm. These cams provide great throttle response, and may be the best possible drop-in cam for your budget 5.3L drift, road race, or drag build. Make 'em eat your dust with COMP Cams NSR drift hydraulic roller camshafts.
( 2 )
$541.95
COMP Cams Xtreme Energy 4x4 cam and lifter kits are built to take advantage of the latest cam technology to provide maximum performance and low-end torque for your vehicle. Whether your use is off-roading or towing, there is an Xtreme 4x4 for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.
( 69 )
$305.95
—
$338.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
