Availability
Showing In Stock Items. Show All 30 Items.
Airflow Research developed these 185cc SBF Enforcer cylinder heads for maximum small block Ford performance. They're manufactured from tough but lightweight A356 aluminum and feature 185cc intake runners and 64cc combustion chambers. Enforcer heads feature a 0.325 in. deck, stock valve locations, and are designed for blocks with a minimum bore of 4.000 in. The heads are available bare or fully assembled with stud mount rocker mounting.
( 21 )
$767.55
AFR 210cc LS1/LS2/LS6 Enforcer cylinder heads are available in standard and small bore applications. They feature Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. The budget-friendly heads are perfect for your OEM engine operating below 6,300 rpm. Fully assembled Enforcer models include the identical components found in AFR's higher end CNC-ported cylinder heads—such as PAC Racing springs, Viton® valve seals, machined bead valve locks (not stamped), hardened spring seats, and one-piece 8mm 21 4N stainless steel valves. The heads are available without any parts for the DIY. Sold as a single piece, two heads are required per engine.
( 2 )
$780.15
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 163 )
$1,022.50
—
$1,087.50
Fit any LS engine with Chevrolet Performance LS3 cylinder heads. Manufactured from aluminum alloy, these GM stock replacement heads are assembled with intake and exhaust valves, stem seals, retainers, springs, and locks. Great cylinder head airflow has always supplied the LS Series with exceptional performance. Retain that performance and save yourself time and worry by replacing your tired cylinder heads with Chevrolet Performance LS3 cylinder heads.
( 4 )
$1,069.03
Chevrolet Performance cast iron Vortec cylinder heads will fit 1958 and later small block Chevy engines, and offer a 20 to 40 hp increase over earlier cast iron small block heads. Features include fast burn combustion chambers, and a high-velocity port design. They require the use of a Vortec-style intake and self-aligning rocker arms, and come complete with valves, springs, and retainers.
( 6 )
$795.65
ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity. They're heat-treated prior to thread rolling and machining. ARP Pro Series kits are also available with 12-point nuts, and all studs come complete with hardened parallel washers for an even load distribution and accurate torque readings. With hundreds of models ready to ship, these cylinder head fasteners can be ordered for virtually any style engine.
( 793 )
$908.99
Something great just got better! Trick Flow® used advanced 3D solid modeling and CAD tools (plus a couple decade's worth of racing experience) to turn its track-proven Twisted Wedge® design into the potent Twisted Wedge® 11R 205 head for serious performance enthusiasts and racers. Trick Flow® Twisted Wedge® 11R 205 heads are a direct replacement for previous Twisted Wedge® heads and work with all Twisted Wedge-specific pistons. New high velocity, race-inspired CNC Competition Ported runners have been optimized for today's popular bore and stroke combinations, and have a premium high resolution finish for ultimate performance. Modified 11 degree intake and 13 degree exhaust valve angles and a restructured, CNC-profiled combustion chamber arrangement provides more airflow and performance potential. Premium certified materials and components, along with the finest CNC tooling, are used to ensure uncompromising quality and durability, dimensional accuracy, and balanced flow from port-to-port. The fully machined castings are very strong and have a great-looking, billet-like appearance. Trick Flow® Twisted Wedge® 11R 205 cylinder heads are available fully assembled or as bare castings and sold individually.
( 7 )
$1,174.99
Trick Flow GenX® 225 cathedral port cylinder heads are fully CNC-machined to significantly increase the performance of 6.0L LS2 engines. Trick Flow engineers altered the valve angles from 15° to 13.5° to decrease valve shrouding, increase mid-lift airflow, and improve rocker arm-to-valve cover clearance. Top-of-the-line CNC Competition Ported runners have a premium high resolution surface finish for maximum flow and performance. The spark plugs were relocated in the CNC-profiled combustion chambers to enhance mid-lift airflow and increase the rigidity of the casting for extreme horsepower applications. Material was added at the rocker arm mounting points to increase high-rpm valvetrain stability. Trick Flow GenX 225 cylinder heads are emissions-legal under CARB E.O. #D-747 for 1997-present GM vehicles with 4.8L, 5.3L, 5.7L, and 6.0L engines. They are available fully assembled or as bare castings. Sold individually.
( 3 )
$1,049.99
PROMAXX Performance OE-replacement Jeep inline cylinder heads offer direct bolt-on power. Developed and designed from factory castings, these iron heads feature hardened valve seats and heavier-than-stock castings to resist cracking and warping. They replace your stock components and restore original performance. Once again, your rig will be readied to take on aggressive off-road adventures. The heads are available complete with valves and springs. Order the model recommended for your engine application.
( 3 )
$937.00
Chevrolet Performance L92 cylinder heads are production-style aluminum heads that provide great airflow and exceptional performance. Features include: * Manufactured from 319-T5 aluminum alloy * Aluminum performance head * Fits any LS family engine with 4.000 in. bore or larger * Solid stem intake and exhaust valves * .510 in. Max Lift valve springs * As-cast L92-style intake ports * D-shaped exhaust ports * As-cast combustion chambers * Angled spark plugs (14mm; 5/8 in. hex; 3/4 in. reach; taper-seat plugs) * 15 degree valve angle * Bolt-down-type rocker arms * Center-bolt valve cover hold-downs
Not Yet Reviewed
$999.99
VEGE Remanufactured cylinder heads are a popular choice for performance and value. With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured cylinder heads with a level of quality that equals that of new OEM products—at extremely competitive prices. The rebuilt cylinder heads are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include a cast iron or aluminum cylinder head, intake and exhaust valves, valve springs, retainers, locks, stem seals, rocker arm studs, and more. Many heads include rocker arms. Nearly a thousand models are available, for fitment on countless applications.
( 41 )
$891.99
—
$1,075.99
AFR 200cc SBC Enforcer Cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners and combustion chambers that allow for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 350 to 400 cu. in. operating below 6,000 rpm. They come fully assembled with the identical components found in their higher end CNC-ported cylinder heads, such as ARP rockers studs, Melling Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks, hardened spring cups and ductile iron seats, and their one-piece 8mm 21 4N stainless steel valves. The AFR 200cc SBC Enforcer cylinder heads are available in straight or angle plug, assembled or bare.
( 2 )
$789.60
Maximum quality, maximum performance, and minimum pricing—PROMAXX Maxx Series SBF cylinder heads take affordable power to the next level. With ultra-smooth Grade A 356-T6 aluminum castings that are precision machined, these small block Ford heads deliver awesome air speeds with super-efficient chamber designs to produce the power and torque you've sought for your setup. Maxx cylinder heads feature 5-angle competition valve jobs, diamond-honed bronze guides, and hand bowl blending. They also offer these heads bare. Get superb out-of-the-box performance, without emptying your wallet, when you order PROMAXX Maxx Series small block Ford cylinder heads.
( 14 )
$979.00
Trick Flow GenX® 220 cylinder heads for GM 6.0L LS2 engines are a great value in GM LS performance. The cathedral port heads incorporate features of Trick Flow's fully CNC-ported LS heads in a more affordable "Fast As Cast®" version that flows nearly as much air as Trick Flow's competition ported heads. The special Fast As Cast runner design duplicates the port shape and profile of fully CNC-ported runners, resulting in near-CNC-ported performance for the same price as regular cast cylinder heads. Other features include shallower 13.5° valve angles to decrease valve shrouding and increase mid-lift airflow, relocated spark plugs, CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending), improved rocker arm/ valve cover clearance, and a rigid casting design. Trick Flow GenX 220 cylinder heads are emissions-legal under CARB E.O. #D-747 for 1997-present GM vehicles with 5.7L and 6.0L engines. They are available fully assembled or as bare castings. Sold individually.
( 4 )
$1,099.99
ATK High Performance 250cc LS1/LS6 aluminum assembled engine cylinder heads are complete new builds. They include valves, valve springs, valve spring retainers, valve stem seals, and soft plugs. All threads are checked and repaired, if necessary; and all passages and part interfaces are pressure checked. Product specifications: * Material: A356 aluminum * Bolt count: 6-bolt head * Intake port volume: 250cc * Intake port dimension: 3.227 in. H x 1.119 in. W * Intake port location: Stock cathedral port * Intake valve size: 2.080 in. * Intake valve material: Stainless steel * Exhaust port volume: 105cc * Exhaust port dimension: 1.628 in. H x 1.722 in. W * Exhaust port location: .086 in. raised * Exhaust valve size: 1.60 in. * Exhaust valve material: Stainless steel * Combustion chamber size: 61cc * Valve cover bolt pattern: Perimeter bolt * Valve angle: 11 degree * Valve spring pocket diameter: 1.610 in. O.D. * Valve spring pac: 1905 dual spring (hydraulic roller) * Valve spring setup height: 1.800 in. * Valve spring closed pressure: 160 lbs. (with retainer) * Valve spring open pressure: 1.200 in., .600 in. lift, 425 lbs. / 1.150 in., .650 in., lift 445 lbs. (with retainer) * Valve spring max lift: .650 in. * Valve guide material: Manganese bronze * Valve seal material: Viton© * Valve seat material: Powder metal * Retainer material: Titanium * Deck thickness: .750 in. * Minimum bore diameter: 3.900 in. (will not fit stock bore 4.8L/5.3L) * Flat mill: .006 in. per cc * Spark plug dimensions: 14mm x .708 in. with tapered seat * Torque specifications per application based on factory or aftermarket bolts/studs
Not Yet Reviewed
$998.99
PROMAXX Performance Series One small block Ford cylinder heads are affordable, high-flow as-cast versions of fully CNC-ported heads. These heads feature ultra-smooth 356 T-6 aluminum casting, 5-angle valve jobs, precision CNC machining, and diamond-honed bronze guides. Put track-tested performance under your hood with a formidable pair of professionally assembled Series One small block Ford cylinder heads. They are available assembled or bare. Features, items, and specs: * 175cc as-cast intake runners * Multiple spring options * Assembled heads include 21-4N one-piece swirl-polished back-cut stainless steel valves, 3/8 in. studs, and adjustable guide plates
( 1 )
$979.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
