2001 HONDA | Summit Racing

Air Lift WirelessAir 2nd Generation On-Board Air Compressor EZ Mount Systems

Air Lift WirelessAir 2nd generation on-board air compressor EZ mount systems give you everything you need for the fastest, easiest installation possible. EZ Mount systems package the manifold and upgraded, heavy-duty compressor into one convenient, pre-assembled and factory-tested bracket—giving you everything you need to have full control of your air springs in no time at all. Control the air like a boss with your Air Lift WirelessAir 2nd generation EZ mount kit. Features and items: * Inflate and deflate each air spring independently to different pressures * LCD-display wireless controller * One-touch control from inside or outside vehicle is perfect for uneven/top-heavy loads * Two user-defined memory buttons * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * All wiring, hardware, and fittings required for installation

4.38 out of 5 stars ( 8 )

$671.03

Summit Racing™ Battery Pro Packs

Summit Racing™ battery Pro Packs combo an Optima RedTop battery, Painless battery cable kit, and a tray/hold-down kit for a complete install in your vehicle. The high performance AGM RedTop is Optima's ultimate starting battery designed to deliver a strong burst of ignition power for a reliable start-up every time. The batteries offer longer life, more vibration resistance, no maintenance, and are virtually spill proof and mountable in most any position. Painless Performance battery cable kits include a red 1-gauge positive and a black 1-gauge negative cable with lightweight abrasion-resistant insulation capable of handling over 250 amps and heavy-duty terminals already installed, side post adapters, and high-amp crimp ring terminals. Their 16 ft. length make them ideal for trunk-mounted batteries and custom installs. The battery tray/hold-downs are made from premium aluminum and chosen to match the battery in the Summit Racing™ Pro Pack selected.

Not Yet Reviewed

$550.97

Air Lift Load Controller II Air Compressors

Air Lift air compressors are designed for use with their Load Controller II systems. If you're looking for replacement compressors for your system, they provide the power that you need to inflate your air lines.

Not Yet Reviewed

$619.99

Injector Dynamics ID1050x Fuel Injectors

Injector Dynamics ID1050x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1000 and X Series, these injectors are a drastic improvement over previous series from Injector Dynamics. Order the set recommended for your vehicle. Features include: * Requires only 8 V for consistent operation at 8 bar * Corrosion resistance makes them compatible with all automotive fuels * Compact bodies allow fitment in over 200 applications * Improved internal flow path—without sacrificing low flow performance * Stronger magnetic circuit offers stable operation up to 10 bar * Replaceable inlet filter extends service life

5.0 out of 5 stars ( 10 )

$600.60

Wilwood Forged DPHA Front Caliper and Rotor Kits

Wilwood Forged DPHA front caliper and rotor kits are designed around their DynaPro series 4-piston calipers and forged billet bodied rotors for high-strength clamping and solid stopping performance. These calipers work perfectly with the OE master cylinder and ABS functions, bolt up to the stock mounts on factory spindles, accept OE brake hoses, clear many factory aluminum wheels, and fit over 262mm diameter rotors. The low-dusting pads are firmly balanced by four stainless steel pistons, which provide corrosion resistance and thermal retardant qualities.

4.86 out of 5 stars ( 7 )

$586.86

—

$717.74

ACT Heavy-Duty Clutch Kits

ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.

4.54 out of 5 stars ( 87 )

$503.00

—

$725.00

PowerStop Z17 Evolution Plus Stock Replacement Brake Kits with Calipers

PowerStop Z17 Evolution Plus stock replacement brake kits with calipers have everything you need for an easy, bolt-on solution for your daily driver. They include Z17 Evolution Plus ceramic pads, Autospecialty brake rotors, and non-coated replacement calipers, along with stainless steel hardware. If you need a complete, fast, and easy solution that meets original equipment standards, then PowerStop's Z17 Autospecialty brake kits with calipers are the ideal choice to refresh your braking power. (Some models may include rotors for only the front or only the rear.)

4.25 out of 5 stars ( 52 )

$514.14

—

$580.37

ACT Xtreme Clutch Kits

ACT Xtreme clutch kits pave the road to high performance by meshing solid products, outstanding quality, and exceptional value. These Xtreme clutch kits with racing or street discs are based on solid engineering principles. They afford a clamp load increase of 50 to 100 percent with moderate-to-stiff pedal feel, and many of these new (not rebuilt) units are SFI-certified to ensure safety. You've spent long hours building your engine; now put it in motion with the smooth, precise feel and longer life of an ACT Xtreme clutch kit.

4.5 out of 5 stars ( 16 )

$511.00

—

$642.00

CP Pistons Arias Piston and Ring Kits

In 1969, Arias Pistons was started and forged with a reputation for power for over 40 years. In 2017 CP-Carrillo acquired Arias Pistons to continue their legacy. CP Pistons Arias piston and ring kits deliver lightweight, high-strength construction and excellent performance. The pistons are forged from high-tensile strength 4032 or 2618 billet materials with CNC-machined working surfaces, optimized crowns for efficient combustion, and diamond-turned ellipsoidal skirt profiles. Arias piston kits are available in many different bores and piston styles, and will include quality rings, wrist pins, and retainers. Make your choice from the extensive list of Arias piston and ring kits offered by CP Pistons.

Not Yet Reviewed

$741.30

MagnaFlow California 40000 Catalytic Converters

MagnaFlow California 40000 catalytic converters are the first series in a new line of converters designed for vehicles with second-generation OBDII systems. Designed, tested, and catalogued for specific vehicles, these are not traditional universal converters. These converters have higher efficiency than conventional strict California requirements for conversion efficiency and durability, and most are direct-fit requiring no bending, cutting, or welding.

5.0 out of 5 stars ( 2 )

$631.55

Wilwood Forged DPHA Front Caliper Kits

Wilwood forged DPHA front caliper kits are DynaPro packages specifically designed for Honda® and Acura® models originally equipped with 262mm diameter rotors. Packaged with calipers, pads, and hardware, DPHA calipers are available in several high-gloss, high-temperature, and brake fluid-resistant sealed powdercoat colors with the Wilwood signature logo. DynaPro Honda®/Acura® (DPHA) 4-piston calipers have forged billet bodies to deliver high-strength clamping force and positive stopping power. Plus, the stainless steel pistons provide fully balanced pad loading, along with the corrosion resistance and thermal retardant qualities of the stainless alloy that will keep your calipers cooler and running trouble-free for many more miles. Wilwood forged DPHA front caliper kits bolt directly to the stock mounts on factory spindles, fit over the OE 262mm diameter rotor, accept the OE brake hose, and clear many factory aluminum wheels, including the EM1 Si 15 in. wheel. The calipers also work perfectly with the OE master cylinder and ABS functions.

5.0 out of 5 stars ( 5 )

$577.49

Firestone Heavy Duty Air Compressors

Put your air suspension together your way with some help from Firestone. These heavy duty air compressors are ideal for custom systems.

4.75 out of 5 stars ( 4 )

$584.49

Fluidampr Harmonic Dampers

Using only three parts (a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two), SFI-approved Fluidampr harmonic dampers can control all crankshaft vibration--not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.

4.77 out of 5 stars ( 146 )

$501.95

PowerStop Z23 Evolution Sport Brake Upgrade Kits with Calipers

PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. PowerStop's Z23 Evolution Sport brake upgrade kits with calipers comes with everything you need--pads, rotors, calipers, and premium stainless steel hardware for an easy, bolt-on upgrade for your daily driver. Along with increased braking power, the carbon fiber ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with drilled, slotted, and zinc plated rotors to ensure a cool, smooth ride that protects against rust and corrosion, while the powdercoated calipers not only protect against corrosion, but also stand out behind your wheels. Give your daily driver the easy and affordable performance upgrade it deserves--PowerStop Z23 Evolution Sport caliper brake kits.

4.69 out of 5 stars ( 234 )

$712.71

—

$746.29

Walker CalCat Direct-Fit Catalytic Converters

Specifically formulated for Californians, Walker CalCat direct-fit catalytic converters comply with regulations for OBD-II and pre-ODB-II vehicles. These converters have an OE-style and fit for ease of installation. The CalCats feature a stainless steel body, a heat-shielded pipe, and a structural brace for enhanced strength and durability. Get the best balance of performance and price from Walker CalCat direct-fit catalytic converters, available for a wide range of vehicle applications.

4.21 out of 5 stars ( 24 )

$506.99

—

$746.99

ST Suspensions Sway Bar Sets

Keep your car level through the turns with a sway bar set from ST Suspensions. These front and rear assemblies will drastically reduce body roll when cornering. The solid steel bars are available in different thicknesses and configurations for precise fitment on specified vehicles. They're powdercoated for an attractive and durable finish. Order the ST Suspensions kit recommended for your application.

4.75 out of 5 stars ( 20 )

$599.00

Special Offer

On Sale

Moroso Street/Strip Oil Pans

Designed for street performance machines that see occasional strip use, these Moroso oil pans are modified with deep or kicked-out sumps for increased capacity and oil control under hard acceleration. With a simple bolt-on installation into most production chassis, these Moroso street/strip oil pans are perfect for the weekend warrior.

4.15 out of 5 stars ( 422 )

$580.99

—

$714.99

$522.89

—

$643.49

Walker CalCat Universal Catalytic Converters

Specifically created for Californians, Walker CalCat universal fit catalytic converters comply with regulations for OBD-II and pre-ODB-II vehicles. These converters feature a universal, weld-in design at a great cost savings over expensive OEM converters and feature a stainless steel body, heat-shielded pipe, and structural brace for enhanced strength and durability. Get the best balance of performance and price from Walker CalCat universal catalytic converters. Order the model designed for your application needs.

4.84 out of 5 stars ( 49 )

$510.99

—

$695.99

ACT Heavy-Duty Pressure Plates

ACT heavy-duty pressure plates feature induction-hardened diaphragms to reduce wear and promote smooth operation. They utilize stronger drive straps and rivets to strengthen the pressure plate and prevent breakage. All castings are CNC-machined for greater consistency and precision. Step up your race and street game; order the ACT heavy-duty pressure plates recommended for your vehicle. Some of their many features include: * Most popular choice * 20 to 50 percent clamp load increase * Computer spin-balanced * Stiffening ribs * Pedal feel is stock to moderate * SFI-certified * Recommended disc: Street/Race

4.9 out of 5 stars ( 10 )

$509.00

South Bend Clutch Stage 2 Drag Race Clutch Kits

South Bend Clutch Stage 2 Drag Race clutch kits are designed with racers in mind. They include a single mass SFI-approved flywheel with each kit—typically required for drag racing when the original design is dual mass. The heavy-duty pressure plate is modified for a puck-style disc with no cushion between the linings to keep the clutch pedal travel short and quick. These South Bend Clutch Stage 2 Drag Race clutch kits are recommended for drag racing, drifting, and limited street use. Order the kit that's recommended for your specific vehicle and engine size. Features, items, and specs include: * Graphite-impregnated ceramic friction material for exceptional durability, heat transfer, torque capacity, and reduced chatter * Puck-style disc reduces rotational mass and total drive surface area, while increasing psi on the surface of the friction material * Disc design minimizes inertia, accelerating the transfer of torque from the engine to the wheels * Meticulous processing and advanced packaging materials

Not Yet Reviewed

$553.40

—

$609.27

Rhodes Race Cars Lemons and Chumps Roll Cages

Rhodes Race Cars Lemons and Chumps roll cages are specifically designed for those of you looking to compete in 24 Hour of Lemons and ChumpCar Series races. RRC has taken out all of the guess work and come up with these easy-to-install kits. All the tubing is pre-bent and notched for ease of installation. Rhodes Race Cars Lemons and Chumps roll cages are available in ERW mild steel, DOM, and chromoly. ERW mild steel is accepted by both sanctioning bodies, but DOM is very strongly recommended. Chromoly is generally NOT recommended for this type of racing. Check your sanctioning body's rules before you order! Note: Some minor trimming may be required during installation. All RRC cages are weld-in cages.

1.33 out of 5 stars ( 6 )

$574.95

CURT Receiver Hitches

CURT receiver hitches are carefully designed and constructed for flawless performance, fit, and finish. They are built from the highest quality materials with precision robotic welding that ensures superior strength and fitment. The hitches feature WeatherTite construction to seal the main body from the elements, an open-back receiver for easy cleaning, and a step pad on most applications. Other features include seamless one-piece Pro Design collars, for rust resistance and added strength, and a durable EverGloss powdercoated finish that is available in a variety of colors for many models.

4.74 out of 5 stars ( 1682 )

$547.99

—

$620.99

Canton Racing Drag Racing Wet Sump Oil Pans

Canton Racing drag racing wet sump oil pans are designed to provide the best oil control and power savings possible for each application. Canton Racing drag racing wet sump oil pans are available in several chassis configurations for all levels of performance from Bracket to Pro Drag, and most are available in steel and aluminum.

3.73 out of 5 stars ( 45 )

$558.00

South Bend Clutch Stage 2 Endurance Clutch Kits

South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings

3.0 out of 5 stars ( 3 )

$501.32

—

$553.67

2001 HONDA Parts and Accessories