Availability
That clunking sound you hear beneath your vehicle might be due to a broken exhaust hanger causing your exhaust system to bounce around. If that's the case, don't sweat it—just swap out the bad exhaust hanger with a new one from Summit Racing™. These replacement hangers are available in a variety of materials and styles to best facilitate your repair. Keep your exhaust system securely positioned and attached where it belongs, with quality hangers from Summit Racing™.
( 44 )
$8.99
Replace your grungy hardware. Dress up your engine and keep it looking good with Summit Racing™ classy stainless steel intake manifold bolts. They're made from rugged Grade 8 stainless, which means that not only are they strong and durable, they're also corrosion-resistant. They're hex-head bolts for easy installation, and they fit most popular manifolds.
( 141 )
$10.99
—
$11.99
These heavy-duty Summit Racing™ balancer bolts are the best way to bolt on your damper. As the crankshaft flexes and twists, the damper absorbs a lot of kinetic energy. To ensure that the damper stays on tight, these bolts include a thicker flat washer, machined perfectly flat to spread the fastening load over a greater surface area. They're manufactured from premium materials for maximum strength and feature a quality finish for good looks.
( 116 )
$5.99
Summit Racing™ extended-life oil filters keep your engine free from contaminants. Our canister-style filters feature proprietary synthetic filter media that offers high filtration and low restriction—longer. These economical oil filters deliver up to 10,000 miles of engine protection. Order the model recommended for your vehicle and engine application. Summit Racing™ extended-life oil filters feature: * Durable 0.5mm thick steel canister for withstanding high operating pressures * High-capacity can design for trapping and holding dirt * 98 percent multi-pass particle removed efficiency * High-quality pressed steel baseplate * Silicone sealing gasket * Roll-tap formed threads to help prevent vibration fatigue * Silicone anti-drain-back valve that protects engine during start-up * Filter bypass relief valve if filter media becomes blocked * Textured powdercoating to ensure durability and deliver enhanced grip * Protective film over filter opening to prevent debris from contaminating filter prior to installation
( 40 )
$7.99
—
$8.99
Give your roller lifters the proper orientation with Summit Racing™ lifter guides. Hydraulic roller lifters cannot be allowed to rotate, and our sturdy lifter guides will keep your lifters properly positioned to prevent rotation. They're available in a variety of styles for applications from the 1980s and up. Trust Summit Racing™ lifter guides to keep your lifters captive!
( 40 )
$9.99
Since you're installing that new distributor, you'll need Summit Racing™ hold down clamps. Dress up your engine compartment while securing your distributor. Made from top-quality materials, they're the perfect way to dress up your engine compartment.
( 104 )
$8.99
—
$10.99
Summit Racing™ offers replacement radiator caps for a variety of applications. These recovery-style caps feature a heavy-duty design built to handle the pressures of street/strip use. They're compatible with many engine designations, and are available in pressure ranges up to 26 psi. Order the cap preferred for your engine bay.
( 88 )
$5.99
—
$6.99
Prevent oil leaks, pressure loss, and aeration of your oil with our Summit Racing™ copper oil pump gaskets. The gaskets' soft copper construction will conform to minor surface irregularities ensuring a positive seal between the rear cap surface and oil pump mounting flange. They're cheap insurance that solves a common issue that usually gets over looked.
( 51 )
$4.99
Dress up your engine compartment while keeping oil in its place and the dirt at bay with Summit Racing™ valve cover oil fill caps. They're manufactured from high-quality material, providing a proper fit and seal to prevent oil loss. These round, steel caps are available to fit a variety of applications, including GM, Mopar, Ford, AMC, Jeep, and other make/model vehicles. Whatever your part needs, chances are Summit Racing™ has it!
( 37 )
$4.99
Oil pan pressure relief valve plugs are typically used to delete the secondary pressure relief valve when the Active Fuel Management (AFM) and/or the Variable Valve Timing (VVT) has been deleted. Our Summit Racing™ LS Oil Pan Pressure Relief Valve Plugs feature steel construction, a black finish, internal Allen-style head, and include an aluminum crush washer to deliver a complete seal into most LS pans with a secondary pressure relieve valve.
( 1 )
$6.99
When replacing engine components it necessary to have the proper replacement gaskets. These high-quality Summit Racing™ water pump gaskets are perfect for your next project.
( 6 )
$2.99
—
$9.99
Is it time to hook up your throttle linkage? If so, then you'll need one of these Summit Racing™ carburetor throttle lever studs to get the job done. We include nuts and washers, too. They're available in different sizes and configurations (including swivel) for throttle or kickdown applications.
( 31 )
$6.99
Summit Racing™ woodruff keys are designed to locate the crank sprocket on the nose of the crankshaft. They're made of steel and available with zero degree offset for forward or rearward position.
( 9 )
$3.99
—
$5.99
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. Summit Racing™ springs are made from high quality steel with precision winding and surface treatments. Special consideration for reduced valvespring and retainer mass ensures stability at high rpm. This reduces valve float, extends the rpm range, and greatly reduces valvetrain wear.
( 30 )
$4.99
Limiting the amount of coolant flow leaving the engine lets you control the amount of heat absorbed by the coolant itself. You can adjust the flow with a Summit Racing™ water outlet restrictor kit. They include three round aluminum plates with 5/8 in., 3/4 in., and 1 in. I.D. holes. Simply mount the appropriate plate under the water outlet on the intake manifold. An easy and economical temperature control solution!
( 4 )
$7.99
These Summit Racing™ magnetic drain plugs will catch metal particles before they get to your bearings, saving you from early engine, transmission, or gear failure.
Not Yet Reviewed
$4.99
Whether you're dropping in a freshly rebuilt V8, or just replacing worn-out motor mounts, make premium-quality Summit Racing™ motor mount bolts your go-to choice. These hardware sets are available for a range of applications—from small and big block Chevys, to small block Ford Windsors. Each package contains rugged steel hex-head bolts with a protective finish for corrosion resistance, along with a set of flat washers. Install your engine with confidence; it all starts by securing the motor mounts to your engine block with extra-strong specialty bolts from Summit Racing™.
( 11 )
$7.99
Summit Racing™ offers camlock plate and cam bolt kits for a variety of Chevrolet big block, small block, and LS engine applications from the 1950s and up. These economical locking accessories give you extra insurance and peace of mind when installing a performance camshaft. They include Grade 8 camshaft bolts and a locking plate that locks them into place after they're torqued to spec. Keep your cam and timing gear locked securely together; order the kit recommended for your vehicle.
( 47 )
$8.99
Our precision timing tape is designed to allow you to accurately time street or high performance engines and properly set the valve lash.
( 234 )
$4.99
Summit Racing™ fuel tank caps are designed to keep fuel in place. Each style is made of top-grade material and they are offered in various fuel tank cap styles to suit your vehicle's application needs.
( 25 )
$5.99
Summit Racing™ idle air control valve and throttle position sensor bolt kits are application-specific for use in mounting the TPS and IAC to the throttle body on LS-style engines. These replacement kits consist of two each: M4-12mm and M4-8mm bolts, and four washers to facilitate installation. They fit 1997-2014 GM LS Series engines.
( 7 )
$2.99
Check-out the vast selection of trim screws Summit Racing™ has to offer for your current or next job or project. From Phillips oval head tap screws to trim panel fasteners, you're sure to find the correct fit with this quality hardware that offers original equipment quality at an affordable price.
Not Yet Reviewed
$8.99
Summit Racing™ fuel pump gaskets provide your project with quality and value. Who doesn't like a good deal? And who better to provide high performance with value than Summit Racing™. Our replacement fuel pump gaskets deliver leak-proof sealing cut from durable composite material that also has just enough flexibility to fill small surface imperfections tightly. So, the next time you service your fuel pump, opt for the best deal to make you, your car, and your wallet happy--Summit Racing™ fuel pump gaskets.
Not Yet Reviewed
$1.99
Our Summit Racing™ oil filter adapters are perfect for securing an oil filter to your engine block when rebuilding or replacing an engine. These adapters bolt right up or thread into your engine block and allow for a spin-on cartridge oil filter.
( 7 )
$8.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
