Availability
On Sale
Koni STR.T Street shocks and struts are designed to replace your factory shocks and struts, as well as complement your vehicle with performance lowering springs and sway bars. These non-adjustable shocks and struts feature a twin-tube design and larger-diameter piston for optimum street driving. Get a better hold on the road, plus damping action for a more stable ride—with suspension parts from the Koni STR.T Street line. Order the STR.T Street shock and strut model designated to fit your application.
( 168 )
$95.60
—
$188.30
$76.48
—
$150.64
On Sale
You definitely know when your power steering pump fails--turning the wheel becomes a muscle-building chore. Racing Automotive Group power steering pump kits offer a solution. Designed for use with steering quickeners, the pumps produce up to a 1,300 psi at the recommended pump rpm range, feature lightweight aluminum construction, and are packaged with either a V-belt or serpentine pulley kit, deluxe head mounting kits, and aluminum remote reservoir. Select the kit needed for your vehicle. Aluminum P/S pump features: * Includes black anodize aluminum pulley -- 6-groove serpentine -- V-belt * Provides smooth, consistent steering feel * Rated at 3 gpm and produces up to 1,300 psi -- Recommended pump range of 1500 to 6500 rpm * Includes a -6 AN pressure and a -6 AN return fittings Remote reservoir with mounting bracket features: * All aluminum, fabricated construction, plain finish * 9 in. overall height, 3.5 in. overall diameter * 1.5 lbs. * Complete with -6 AN inlet and -10 AN outlet * Includes vented cap * Vertical mount * Not internally baffled -- Connect this reservoir using 3/8 in. (6 AN) hose -- Use rubber hose and push-lock fittings or braided stainless steel lines Deluxe head mount bracket features: * Kit provides proper installation of the Type II-style power steering pump to most SBC applications with short-style water pump * Bracket kit includes: -- Bracket to engine -- Pump to bracket -- Mounting hardware * Head mount locates the pump to the driver's side cylinder head
Not Yet Reviewed
$229.99
$206.99
On Sale
Sport shocks and struts from Koni are carefully designed to provide exceptional road-holding and handling properties, combined with an acceptable level of comfort. They offer responsive steering and cornering, improved body control, and limited body movements when braking and accelerating, resulting in a direct feel and excellent wheel-road contact.
( 80 )
$130.36
—
$466.41
$104.29
—
$373.13
On Sale
Steeda's full-length subframe connectors are perfect for daily drivers or serious cars with high-horsepower, sticky tires or a competition suspension. Steeda starts with beefy 1.5 x 2 in. square tubing that spans the full length of the floor pan, providing unmatched chassis rigidity, improved handling, and improved ride quality with reduced impact harshness. Steeda's subframes are reinforced at each bend and include Steeda's exclusive torque box reinforcing plate for the strongest attachment possible to the rear subframe for maximum effectiveness. Steeda's full-length subframe connectors also feature a one-piece reinforced seat bolt cross brace. Steeda's cross braces have reinforcing gussets built in for greater strength with less welding, making for an easier installation experience. These Steeda full-length subframe connectors come with all mounting point tabs pre-welded to the subframe connectors. They come available in bare steel or black powdercoated finishes.
( 4 )
$259.95
$233.96
On Sale
Steeda's X2 ball joints improve the suspension geometry on lowered Mustangs by raising the spindle relative to the ball joint pivot-point. This raises the roll center back into the correct range for optimum handling, resulting in reduced body roll, quicker steering response, and improved overall front tire grip. Steeda's special ball joints reduce the need for oversized front sway bars and allow for the use of lower front spring rates, creating more grip over uneven pavement and better ride quality. Steeda ball joints are manufactured using the finest materials to ensure performance and durability.
( 7 )
$179.95
$161.96
On Sale
Bump steer is undesirable because the suspension is steering your car instead of you. Correct your bump steer with one of these Steeda bump steer kits. These Steeda bump steer kits feature spherical rod ends with tapered shafts for a hassle-free installation that requires no drilling of the spindle for fit. Steeda manufactures these bump steer kits using the finest materials to ensure performance and durability.
( 22 )
$219.95
$197.96
On Sale
The shocks that started it all! Koni Special D shocks feature an adjustable, monotube, high-pressure gas design that improves ride and handling performance. They're an affordable, perfect choice for OE replacement or suspension improvement. Special D shocks are available for a wide range of applications, from the 1950s and up.
( 30 )
$166.57
—
$230.31
$133.26
—
$184.25
On Sale
Lakewood combined their experience and the latest technology in drag racing to develop shocks and struts that are superior to all other drag shocks and struts available. They provide the correct weight transfer on the initial launch and then bring the front-end down quickly for aerodynamic purposes. This transfer will result in lower ETs and keep the rear-end loaded for maximum traction.
( 115 )
$257.95
$141.95
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$418.95
$272.95
On Sale
The Ford factory engine mounts were designed as soft, flexible mounts to provide a comfortable drive. The tradeoff is the relatively large amount of engine movement that they allow under torque load and on hard acceleration. Engine movement decreases stability under high performance driving conditions and during rapid gear selection. To reduce this movement, Steeda has engineered replacements fitted with specially molded, high-durometer polyurethane inserts. The mount bodies are machined from lightweight, aircraft-grade billet aluminum. You'll enjoy greater stability when accelerating and braking hard and enhanced gear changes under hard acceleration.
( 1 )
$169.95
$152.96
On Sale
Support your Chevy motor properly with Racing Automotive Group solid steel motor mounts. Several high-quality styles are offered to replace OEM-style rubber mounts and eliminate torque loss. All mounts are bolt-on. Choose your preferred pair.
Not Yet Reviewed
$29.99
—
$34.99
$26.99
—
$31.49
On Sale
Racing Automotive Group offers solid transmission mounts for a wide range of applications. These steel replacements are an upgrade for soft rubber mounts from the factory. They eliminate linkage binding, driveline misalignment, and unwanted transmission movement in racing and street performance usage. Fabricated from 3/16 in. steel with a protective black finish, these brackets have pre-drilled holes on top for proper transmission mounting, and threaded nuts welded to the bottom for crossmember mounting.
Not Yet Reviewed
$34.99
$31.49
On Sale
Hooker Blackheart engine mount brackets are designed to bolt right in for ease of installation, provide excellent ground clearance, and optimize driveline angles, making your swap a good fit. The mounts are fabricated from steel to provide a strong and rigid foundation for your engine.
( 2 )
$199.95
$109.95
On Sale
Nickky Bobby ball joint spacers are designed to give you extra space between the frame and control arm, but their main purpose is to change the angle of the ball joint to allow more articulation, thus allowing more downward travel of your front suspension. Made from billet 6061 aluminum, these spacers are available for the driver and passenger side of the vehicle. These shims can be used with any K5208 bolt in upper ball joint, which is the main style used in a majority of vehicles and almost all aftermarket control arms. For off-road and racing use only. Not intended for street use.
Not Yet Reviewed
$274.99
$247.49
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$379.95
$208.95
On Sale
Chassis flex is one of the primary enemies of good handling and efficient suspension. The front tires can't stay planted if your strut towers lack the rigidity they need. Now, you can stiffen and reinforce the front-end of your chassis with Steeda strut tower braces! These chromoly steel bars are available in 2- and 3-point configurations for fitment on a variety of Ford Mustang, Focus, and Fusion models, as well as the Lincoln MKZ. Each brace is black powdercoated to resist rust and corrosion, and the easy bolt-in installation takes only minutes with common hand tools. You'll notice immediate improvement in ride quality and control. Order the Steeda strut tower brace designed for your specific vehicle.
( 19 )
$134.95
$121.46
On Sale
Koni Special Active is the next generation of premium shock absorbers that offer superior handling without compromising comfort. They are the latest advancement in the Koni product portfolio. Utilizing the most recent generation of patented Frequency Selective Damping technology, Special Active shocks control large body motions and cornering forces, but smooths expansion joints and rough roads for improved comfort. Just as a chameleon adjusts to its environment, Special Active shocks transform to suit various road conditions and driving styles, instinctively. Advantages of Special Active shocks include: * Available in shock applications for both front and rear * Improves safety and road holding * Technology proven on factory-equipped vehicles * Provides secure and stable feeling for spirited driving * Unrivaled aftermarket solution can be fitted to most new and older cars * Technology that rivals expensive electronic systems * Driving refinement for cars, light trucks, SUVs, etc. * Performance for driver and comfort for passengers in one
( 9 )
$140.99
—
$263.62
$112.79
—
$210.90
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
