Availability
On Sale
FTI Performance 4L80E Level 3 transmissions are built with unbeatable performance and durability. They are 1,000 hp rated, offered in early (1991-97) and late (1997-up) styles, and available as transmission only or in a kit. The kits include transmission, an FTI SRLS4 Series billet torque converter in your selected stall speed, locking filler tube and dipstick, and a case of High Performance ATF. Choose the 4L80E Level 3 transmission or transmission/converter combo in the style needed for your build.
Not Yet Reviewed
$5,995.99
$5,696.19
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 800 hp * Up to 700 lb.-ft. of torque * Stall: 2,800 to 3,400 * Custom-built, custom-stalled 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input shaft * 300M main shaft * 300M forward clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blueprinted pump and valve body * Transmission mount * New OEM steel pan
( 1 )
$7,845.00
On Sale
FTI Performance 4L80E Level 2 transmissions are built with unbeatable performance and durability. They are 700 hp rated, offered in early (1991-97) and late (1997-up) styles, and available as transmission only or in a kit. The kits include transmission, an FTI SRLS4 Series billet torque converter in your selected stall speed, locking filler tube and dipstick, and a case of High Performance ATF. Choose the 4L80E Level 2 transmission or transmission/converter combo in the style needed for your build.
Not Yet Reviewed
$5,649.99
$5,367.49
GearStar offers level 2, 3, and 4 Ford performance transmissions, custom built by one of their master technicians from start to finish, then dyno tested with converter to the equivalent of 100 miles, ensuring the transmission and converter package is in perfect operating condition before leaving their facility. GearStar Ford 4R70W Level 4 transmissions come fully equipped with a 20,000 GVW cooler, and a variety of customizations geared towards high performance driving. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 750 hp * Up to 550 lb.-ft. of torque * 10 in. custom built, custom stalled, multi-disc forged billet lock-up converter * Stall: 2,600 to 4,500 * Master overhaul kit with Alto hardened steels * Raybestos Gen II Racing frictions * High performance valve body reprogramming kit * New electronics: -- Updated EPC -- Shift solenoids -- Lock-up solenoid -- Internal wiring harness -- Output sensors * High-flow filter * Complete Torrington bearing kit * New bushing kit * New reverse band * Carbon fiber wide O.D. band * 300M hardened intermediate shaft * Heat-treated and stress relived input shaft * High-capacity 4-plate intermediate clutch * Direct clutch pack (eight frictions) * Wide reverse drum with mechanical diode * Updated sun shell and gear * New low spring and roller * High-capacity pump assembly with new gears * Updated O.D. servo pin and piston * Updated dual O-ring 3rd accumulator piston * Custom 360-degree adjustable shift linkage arm * Transmission mount
Not Yet Reviewed
$8,095.00
GearStar offers level 2, 3, and 4 Ford performance transmissions, custom built by one of their master technicians from start to finish, then dyno tested with converter to the equivalent of 100 miles, ensuring the transmission and converter package is in perfect operating condition before leaving their facility. GearStar Ford 4R70W Level 3 transmissions come fully equipped with a 20,000 GVW cooler, and a variety of customizations geared towards high performance driving. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 450 lb.-ft. of torque * 10 in. custom built billet converter with lock-up * Stall: 2,600 to 3,200 * Master overhaul kit with Alto hardened steels * Raybestos Stage I frictions * TransGo reprogramming shift kit with shift command * New electronics: -- Updated EPC -- Shift solenoids -- Lock-up solenoid -- Internal wiring harness -- Output sensors * Complete Torrington bearing kit * New bushing kit * New reverse band * Alto Red Eagle wide O.D. band * High-capacity 4-plate intermediate clutch * Direct clutch pack (eight frictions) * Rev. drum with heavy-duty mechanical diode * Updated sun shell and gear * New low spring and roller * High-capacity pump assembly * Expanded capacity overdrive servo * Updated O.D. servo pin * Updated 3rd accumulator piston * Transmission mount * Custom 360-degree adjustable shift linkage arm
Not Yet Reviewed
$7,095.00
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 600 hp * Up to 600 lb.-ft. of torque * Stall: 2,600 to 3,600 * Custom-built 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input and main shafts * Heat-treated forward steel clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blue printed pump and valve body * Transmission mount * New OEM steel pan
Not Yet Reviewed
$6,845.00
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L65E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 650 hp * Up to 600 lb.-ft. of torque * Stall: 2,600 to 4,000 * Custom-built and custom-stalled 10 in. or 11 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Gen II racing frictions * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 13-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Complete Torrington bearing kit * Bushing kit * Thrust washers * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * 5-pinion heavy-duty front and rear planetary gear sets with sun gear * Hardened output shaft * Hardened reaction shaft and hub * Super hold 4th servo * Corvette servo * Wide carbon fiber wide 2-4 band * New internal wiring harness with new TCC solenoid * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New electronic speed sensor * New valve body spacer plate * New OE steel transmission pan * Transmission mount
( 2 )
$5,945.00
—
$6,445.00
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 60 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for severe off-road use, V8 horsepower, and up to 37 in. tall tires. They feature the Currie exclusive high pinion nodular iron radius bottom center section for improved obstacle slide over, heavy-duty 3 in. tubes, and the industry's strongest standard axle--full 35-spline inner/outer front and 40-spline semi-floating rear axles--making the Currie 60 axles the clear choice for serious off-road users. They increase axle width to 68.75 in. between wheel mounting surfaces for improved clearance with large tires. The front axle features 5 x 5 1/2 in. wheel lug pattern, while the rear is dual-drilled with both 5 x 5 in. (to match stock front axles) and 5 x 5 1/2 in. Upgrade strength, reliability, and functionality; replace your stock axles with Currie 60 crate axles.
Not Yet Reviewed
$5,300.00
—
$6,050.00
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 44 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for heavy off-road use with up to 37 in. tall tires. They feature reinforced nodular iron center sections, heavy-duty 3 in. axle tubes, and heavy forged knuckles (front only), that prepare your rig for adventure. And their use retains the stock axle width, as well as the factory 5 x 5 in. wheel lug pattern, so you can keep those great new wheels you already purchased. Upgrade strength, reliability, and functionality without busting your budget; replace your stock axles with Currie 44 crate axles.
( 1 )
$5,100.00
—
$5,850.00
ATS Diesel Performance Stage 3 automatic transmission packages are designed to comprehensively address inherent weaknesses in stock versions—to produce strong, reliable transmissions for towing, daily driving, or racing. This is achieved by utilizing the ATS extra-deep, finned transmission pan for added cooling power, along with other key parts modified for high performance. Get all that modified power to the wheels with a transmission package that can handle it: ATS Diesel Performance Stage 3 automatic transmission packages. Order the model recommended for your specific vehicle and engine size. Features, items, and specs may include: * ATS formulated clutch material (bonded in-house to CNC laser-cut clutch steels) * Performance torque converter * 300M billet input shaft * Torrington bearing construction * Performance transmission pump * Modified high performance clutch packs/bands * Modified valve body focusing on precise shifts and increased line pressure/torque capacity * New bearings, seals, and gaskets * Co-Pilot transmission controller * 5-year / 500,000 mile warranty
Not Yet Reviewed
$6,284.99
—
$6,554.99
Building transmissions since 1963, Bowler believes in detail, and each of their Tru-Street automatic transmissions are fully remanufactured (not "rebuilt") by one qualified technician, dyno tested, and then custom packaged for safe shipping. The Tru-Street Series includes torque converter and may include other components, as well. Choose the one you prefer.
Not Yet Reviewed
$5,369.99
GearStar offers GM 6L80E Level 3 transmission models for rear-wheel-drive or four-wheel-drive applications. They feature different advertised horsepower ratings and flash stall ratings. Each master overhaul kit comes complete with new gaskets, seals, rings, and pistons. The transmissions are compatible with engines such as Chevy small block Gen III/IV (LS-based) models from 1997 and up. Transmission details: * New wide inlet filter * New bearing kit * New bushing kit * Expanded capacity 3-5 reverse clutch pack using latest generation friction and steels * Expanded capacity 1-2-3-4 clutch pack using latest generation friction and steels * Expanded capacity 4-5-6 clutch pack using latest generation friction and steels * Low / Reverse clutch pack using latest generation friction and steels * 2-6 clutch pack using latest generation friction and steels * Updated AC Delco pump cover (stator support) * New pump vanes with hardened rings * Hardened pump rotor * Upgraded line boost valve and slide spring * Performance tuned valve body with new AC Delco transmission control module and solenoid body * Hardened and reinforced clutch hubs * Billet single disc converter * All transmissions are custom built by one of five master techs from start to finish—and DYNO tested with converter the equivalent of 100 miles to ensure that transmission and converter package are in perfect operating condition before they leave the GearStar facility.
Not Yet Reviewed
$8,745.00
—
$9,245.00
TCI 4x Four-Speed GM automatic transmission packages for externally balanced small block Fords allow you to bolt up your Ford engine to TCI's 4x Four-Speed electronically controlled 4L80E-based transmission or their non-electronic 700R4-based transmission. Bolting right up to your engine like a stock transmission, they make it easy to adapt either of these proven transmissions to any compatible engine by including the exact bellhousing, a special adapter flexplate, pilot adapter, dipstick, and other accessories in a complete package. The 700R4-based transmission uses a Constant Pressure Valve Body to eliminate the need for careful TV cable tuning, the most common cause of 700R4 transmission failure. If you choose the 4L80E-based 4x transmission, these controls are handled electronically by your choice of the TCI EZ-TCU, TCU 2.0, or a factory GM transmission controller. All 4x Four-Speed transmissions are automatic overdrive 4-speeds with lock-up, so simply choose the one that fits your power level.
Not Yet Reviewed
$5,488.95
—
$6,131.95
TCI StreetFighter automatic transmission packages are durable enough to withstand the rigors of even the toughest street machines. Using the highest quality TCI manufactured components, each StreetFighter package is equipped with an automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. This gives you racetrack shifts and shaves time off your ETs. Each transmission goes through a variety of tests to verify that internal fluid pressures and shift characteristic match TCI's strict quality control standards. For the system to operate properly, all throttle linkage, vacuum lines and kick-down components must be connected. Each transmission package consists of a triple-tested TCI transmission and precision-tuned torque converter, a universal transmission cooler and premium TCI RTF transmission fluid. These packages are available with a variety of transmission models and other performance options. Choose the package for your application needs.
( 16 )
$5,237.95
GearStar GM 4L70E Level 3 transmissions come with a custom billet Yank Performance torque converter. This is the first of many upgrades that go into making sure that each transmission is not only built for performance applications to handle up to 500 crank horsepower or 500 crank foot-pounds of torque. These transmissions feature a 15-pin main harness connector that's designed for factory GM applications from 2008+ or other standalone transmission controllers that utilize the input shaft speed sensor. They come with Raybestos Stage 1 frictions, hardened sun shell, expanded capacity input drum with reinforcing sleeve, and a Transgo valve body reprogramming shift kit with shift command. These units come with all new electrics, including the wiring harness, all sensors and solenoids—along with all new bushings, bearings, and seals. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go!
Not Yet Reviewed
$5,145.00
—
$5,645.00
GearStar Ford 6R80 Level 4 transmissions come with a custom billet Yank Performance lockup torque converter. This is the first of many upgrades that go into making sure that each transmission is built for performance applications to handle up to 750 crank horsepower or 700 crank foot-pounds of torque. These units have a brand-new valve body, brand new pump, billet intermediate shaft, expanded capacity clutches and steels, upgraded transmission cooler bypass valve, several valve body upgrades. They come with all new electrics, including the wiring harness, all sensors and solenoids—along with all new bushings, bearings, and seals. Every Level 4 transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go! Ford 6R80 Level 4 transmission models are available for 4WD or RWD applications.
Not Yet Reviewed
$9,745.00
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 59 )
$5,455.99
—
$6,190.99
Continuing the line of Trail-Link kits is the Trail-Gear Trail-Link 3-link Series of Tacoma Solid Axle Swap (SAS) kits that are strong, user friendly, and affordable. They offer several different kits to allow you to pick the kit that is best suited and priced for your unique build. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners, for Tacoma owners, if you have any questions, you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Trail-Link Tacoma Solid Axle Swap SAS "C" kits: * Trail-Gear shock mount kit * Lower link mount--2 in. x .250 in. wall DOM tubing * Upper axle link bracket--1/4in. steel, formed and welded * Panhard brackets--3/16 in. thick * Driver-side front frame bracket--1/4in. steel, formed and welded * Passenger-side front frame bracket--1/4in. steel, formed and welded * Panhard bar--1.25 in. x .250 in. thick wall DOM material * Three RH and LH 1.25 in. Creeper Joints with bungs * Two rod ends with bungs * Misalignment spacers * Shock straps * Link * 3-hole gussets * Front frame reinforcement plates (with IFS box mount kit) * Steering shaft * Steering couplers * Firewall plate * Front extended brake line * Fully loaded calipers * Caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * Tacoma high-steer kit * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$7,999.99
Trail-Gear is the first in the industry to develop a series of Tacoma Solid Axle Swap (SAS) kits that are complete, user friendly, and affordable. They offer several different Tacoma SAS kits to allow you to pick the kit that is best suited and priced for your unique build. Every Tacoma component in these Trail-Gear solid axle swap kits has been engineered for maximum durability and tested using the most advanced engineering technology in the industry. With the full color, in-depth installation instructions, anyone with minimal mechanical and welding skills can install these kits in one or two weekends. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners for Tacoma owners, if you have any questions you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Tacoma Solid Axle Swap SAS "C" kits: * Front spring hanger * All spring and shackle bushings * Shock hoops * 5125 Bilstein shocks * Frame tube jigs * Frame tubes * Shackle mount kit * Front frame reinforcement plates (with IFS box mount kit incorporated) * Steering shaft * Steering couplers * Fire wall plate * Bump stop kit * Heavy-duty front leaf springs * Front extended brake line * Fully loaded left and right calipers * Left and right caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * U-bolt flip kit * Tacoma high-steer kit (regular high-steer kit for 1979-85 solid front axles) * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Full color installation instructions * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled high-pinion 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$7,999.99
Trail-Gear offers fully built Rock Assault front and rear axles made of entirely new parts and customized to your choices. They include everything needed from hub-to-hub, and are expertly assembled by TG's master mechanics. Save yourself time, money, and the hassle of ordering each component separately and then building it yourself. You make the choices and let Trail-Gear do the assembly! Select your kit. Front and Rear Rock Assault fully built axles feature: * 5/16 in. thick, high-strength DOM axle tubes that engage 5/8 in. further into the center section and the 360-degree gusset welded around the tubes on the inside of the housing * Axle tubes have been offset above the housing centerline to allow the inner axles to ride near the bottom of the axle tubes rather than in the center * Increase of 3/8 in. ground clearance under the axle tubing * Heavy-duty, press-formed, 1/4 in. plate steel center section shell is specially shaped to ensure a minimum of 3/4 in. additional clearance under the differential * Differential mounting surface is made from 1/2 in. plate steel Rear axle kit contents and features: * Rock Assault axle housing * Complete rear disc brake kit * Chromoly axle shafts * Bearing pockets * Rear axle bearing service kit * All necessary nuts and studs * Outer offset flanges are made from 4130 chromoly to prevent distortion or bending * Housings are precision aligned using start-of-the-art, 3D digital imaging equipment * Customize each axle to exactly what you need with your choice of: -- Axle width -- Differential Front axle kit contents and features: * Toyota Rock Assault axle housing * Upgraded Longfield 30-spline Birfields * 30-spline chromoly axle shafts * Fully Loaded Six-Shooter knuckle kit * Chromoly spindles * Upgraded brake rotors and calipers * Heavy-duty tie rod and drag link * Trail-Gear's upgraded Trail Safe seals * Super Metal knuckle studs * All necessary nuts, bolts and seals * 59 in. from WMS to WMS * Knuckle balls are forged from 1035 steel * Customize each axle to exactly what you need with your choice of: -- Axle width -- Axle offset -- Differential -- Hubs or flanges
Not Yet Reviewed
$7,599.99
Clearance
TCI 6x 6-speed GM 4L80E automatic transmission packages are the first aftermarket 6-speed automatic transmissions capable of handling 850 hp. They give you six forward gears (2.97, 2.31, 1.57, 1.18, 1.00, and 0.75) for quicker acceleration and increased fuel economy at cruising speeds. The TCI 6x 6-speed GM 4L80E automatic transmission packages are versatile transmissions that fit Chevy small block, big block, and LS Series engines. They also feature a compact design, allowing them to work in a variety of vehicle applications, including pro touring, street, and race vehicles. The TCI 6x 6-speed GM 4L80E automatic transmission packages include a paddle shifter, wiring harness, dipstick, and transmission cooler. Choose the TCI transmission package that's recommended for your vehicle and engine application.
Not Yet Reviewed
$9,312.95
—
$10,343.95
Zumbrota Drivetrain remanufactured axle assembles offer reliable performance at a value price. They're available for thousands of applications—from passenger and off-road vehicles, to race cars and pulling trucks. The axle tubes are straightened to OE specifications; the housings are hydro-blasted and rinsed, then tested for surface wear and cracks; and the gear patterns and rolling torque are properly adjusted to ensure optimum tooth contact. Zumbrota replaces all seals, bearings, crush sleeves, pinion nuts, and shims on the front and/or rear axle assemblies. Order the replacement model recommended for your specific vehicle.
( 9 )
$5,128.99
—
$5,360.99
GearStar GM 4L65E Level 5 Pro Series transmissions come with a custom billet Yank Performance torque converter. This is the first of many upgrades that go into making sure that each transmission is not only built for performance applications to handle up to 700 crank horsepower or 700 crank foot-pounds of torque. These transmissions are designed to bolt to LS style engines. They feature a 13-pin main harness connector that's designed for factory GM applications 1996+ or other standalone transmission controllers. Level 5 Pro Series transmissions come with: Raybestos Stage 1 frictions, hardened sun shell, Sonnax Smart-Tech drum and shaft assembly, billet pump gears, super-hold 2nd servo, super-hold 4th gear servo, heavy-duty 5-pinion front and rear planetary gear set with sungear, hardened output shaft, hardened reaction shaft and hub, and a Transgo valve body reprogramming shift kit with shift command. These transmissions come with all new electrics, including the wiring harness, all sensors and solenoids—along with all new bushings, bearings, and seals. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go!
Not Yet Reviewed
$7,445.00
GearStar offers GM 4L85E Level 3 transmissions for a variety of rear-wheel-drive applications, including many Chevy small block Gen III/IV (LS-based) engines from 1997 and up. Performance specs include: 1,000 hp and up to 1,000 lbs.-ft. or torque. Transmission details: * Converter: Custom built and custom stalled 10 or 11 in. billet Yank Racing * Stall: 2,600-3,600 * Master overhaul kit * Raybestos Racing Blue Gen II frictions * High-flow filter * 2 Transgo reprogramming shift kits * GearStar full race shift kit * High energy wide bands * New bearing kit * New bushing kit * New thrust washer kit * New low roller sprag * 300M hardened input shaft * 300M hardened intermediate shaft * 300M forward hub * High-capacity pump assembly with new gears * New 5 pinion reaction planetary gear set * New 5 pinion low planetary gear set * Extra capacity 2nd gear clutch assembly * Extra capacity 3rd gear super drum with wide heavy-duty sprag, race, and modified plates * Custom machined billet forward and direct drum pistons * Heavy-duty 2nd gear apply piston * New shift solenoids * New EPC solenoid * New PWM solenoid * New manifold pressure switch * New input and output speed senor * New internal wiring harness * Updated boost valve * Updated TCC regulator valve * Blueprinted pump and valve body * Transmission mount * This transmission requires the use of a standalone controller in non-OEM applications * All transmissions are custom built by one of five master techs from start to finish and DYNO tested with converter the equivalent of 100 miles to ensure that transmission and converter package are in perfect operating condition before they leave the GearStar facility.
Not Yet Reviewed
$10,045.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
