Availability
Showing In Stock Items. Show All 1060 Items.
Summit Racing™ Pro LS forged steel crankshafts deliver industry-leading fit, finish, and durability at an affordable price. Order the model recommended for your year/make and engine application. Check out the long list of premium features: * 4340 forged steel * Tested to over 1,200 hp in boosted applications * Core hardened to optimum strength, then tempered to remove stresses * Nitride hardened, which results in less distortion, excellent case depth, and more fatigue life * Profiled counterweights reduce windage * Precision stroke and indexing * Lightening holes are drilled in the rod journals for quicker engine acceleration * Gun-drilled Main Journals for quicker engine acceleration * Each crank is magnetic particle tested to ensure it's free of flaws * Large radius fillets for increased strength, narrowed rod bearings for reduced friction * Straight shot oiling for maximum lubrication just prior to maximum load angle * Maximum journal tolerances of +/- .0001 in. ensure consistent bearing clearance * Micro-polished journals with chamfered oil holes for maximum durability and bearing life * Optimized counterweight placement for reduced twisting at high RPM and ease of balancing * High-quality reluctor rings are installed with precision fixturing * Extra 3/16 in. front keyway for blower cars
( 12 )
$839.99
On Sale
AFR's 335cc BBC Enforcer cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 509 to 540 cu.in. operating below 6,500 rpm. They come fully assembled with the identical components found in AFR's higher end CNC-ported cylinder heads—such as ARP rockers studs, PAC Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks (not stamped), hardened spring seats, and AFR's one-piece 8mm 21 4N stainless steel valves. Order the cylinder heads recommended for your year/make and engine application.
( 5 )
$1,024.00
$921.60
On Sale
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 22 )
$999.95
$898.95
Summit Racing™ precision cast cylinder heads are made from tough A-356 aluminum alloy and feature Permanent Mold "As-Cast" technology. Port accuracy is unrivaled--meaning CNC porting is not required to provide superior flow. The result is CNC-ported performance at a fraction of the price! We start with precision CNC-finished faces and bolt holes for accuracy and fitment. American craftsmen expertly size and install the manganese bronze valve guides and interlocking ductile iron seats before finishing with a competition-grade valve job. From there, the decks are given a final pass for superior finish. They are finish-assembled in the USA with top-quality components like PAC Racing springs, fasteners, one-piece 21 4N stainless valves, machined locks, Viton® seals and chromoly steel retainers. The final result is the performance you want and Summit Racing™ quality you TRUST!
( 15 )
$764.99
—
$899.99
Air Lift WirelessAir 2nd generation on-board air compressor EZ mount systems give you everything you need for the fastest, easiest installation possible. EZ Mount systems package the manifold and upgraded, heavy-duty compressor into one convenient, pre-assembled and factory-tested bracket—giving you everything you need to have full control of your air springs in no time at all. Control the air like a boss with your Air Lift WirelessAir 2nd generation EZ mount kit. Features and items: * Inflate and deflate each air spring independently to different pressures * LCD-display wireless controller * One-touch control from inside or outside vehicle is perfect for uneven/top-heavy loads * Two user-defined memory buttons * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * All wiring, hardware, and fittings required for installation
( 8 )
$799.95
All the quality, reliability, and workmanship you have relied upon for years from the Compstar lineup is taken to the Xtreme--Callies Compstar Xtreme connecting rods. Specifically designed for power adder and diesel applications, these rods utilize the same proven 4340 material and ARP 2000 or L19 fasteners. Strength was added by thickening up the flanges of the H-beam and a reduced depth-of-cut towards the center of each rod, then non-essential weight is taken out of the beam to help keep the overall weight of these Xtreme rods in check. Choose a set for your high output, boosted application.
Not Yet Reviewed
$928.00
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 502 )
$753.99
—
$993.99
On Sale
Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.
( 51 )
$861.84
—
$1,007.33
$778.24
—
$915.93
Intended for high-horsepower street fans, the McLeod RST Street Twin clutch kits are economically priced twin disc clutches that use your existing flywheel. Able to handle up to 800 hp, the RST Street Twin clutches remain completely street-drivable. The organic lined clutch discs provide smooth engagement with a soft pedal effort, making these clutch kits ideal for the street performance enthusiast. (For select vehicles where these clutches are not adaptable to your existing flywheel, a new flywheel is included in the kit.) Here are some additional features of the McLeod RST Street Twin clutch kits: * Alignment tool included * Lighter-than-stock pedal feel * Will bolt to factory flywheel * CNC-machined and anodized flywheel adapter ring * Organic disc facing for smooth and even clutch engagement with excellent release qualities * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 84 )
$825.00
—
$999.00
PSC XD steering gears feature 45mm bearings and sector shafts to eliminate the flex that could cause seals to fail. They feature ratios and components that make parking easier, highway driving more stable, and maneuvering effortless. OEM steering gears in some trucks could be a problem, until now. Make handling your vehicle a pleasure with PSC XD steering gears.
( 14 )
$895.00
—
$899.99
On Sale
Holley LS Modular Lo-Ram EFI intake systems have a top-feed plenum entry configuration, designed to allow the currently available Hi-Ram 105mm plenum tops to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications and was conceived to package with an air-to-water plenum-mounted intercooler—with a shorter overall height than is possible with other existing intake manifolds. Using a modular design, the top-feed plenum configuration with 105mm top keeps the overall height at just 9.07 in.! Additional features and specs include: * Cast aluminum construction * Modular design allows the use of the included top-feed plenum entry * Designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads * Will also work with OE or aftermarket cylinder heads * Designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000 to 8,000 rpm, depending on application * Low height to aid the packaging of a plenum-mounted air-to-water intercooler in a top-feed configuration (or to fit under a stock or mildly modified hood in the front-feed configuration) * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits come with two sets of brackets—a set for long (usually standard length) fuel injectors, and a set for short (such as Pico or LS7) fuel injectors
( 1 )
$1,099.95
$988.95
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 107 )
$849.95
—
$1,699.95
$763.95
—
$988.95
Stay ahead of the curve with fresh instrumentation, like the Dakota Digital VHX direct-fit analog gauge systems. Ideal for classic car restorations, this innovative line features dozens of single dials, clusters, and multi-gauge panels, which install into your vintage ride with no modifications needed. We're talking units for various models of Ford, Chevy, Mercury, Oldsmobile, Jeep, Toyota, Buick, Pontiac, and Dodge … with new "replacements" available for cars and trucks as far back as 1932! Depending on the system you select, you could receive data readings for as many as 20 automotive functions; and, bringing the retro dashboard displays into the 21st century are bright LCD message centers, backlit faces, and fully lit needles. These gauge kits are equally impressive behind the scenes, with solid-state sensors, precision stepper motors, and customizable data readouts. Dakota Digital gauges have revolutionized the industry—just think what they'll do for your driving experience!
( 489 )
$945.25
XS Power RSV Titan8 lithium batteries are designed to maximize capacity and deep cycling abilities. Part of XS Power's Lithium Titanate Oxide (LTO) Series, they have double the amount of storage energy but only half of the instant discharge energy, giving them double the capacity rating, but half of the wattage rating. The built-in 2/0 bussing allows up to four positive and four negative hidden direct connections to each module without the need for any external exposed bussing, while still leaving two easily accessible top terminals and four series or parallel expansion terminals to easily build a bank of nearly any configuration from 12 V, 24 V, 36 V, or any configuration imaginable. XS Power RSV Titan8 BCI direct-fit models are also available.
Not Yet Reviewed
$999.99
Cam Motion lifters are available to fit your desired level of performance and budget. From economical stock replacements to their High Performance, Racing, and Premium lines of lifters, Cam Motion covers many applications. Their Premium hydraulic roller lifters feature cold-forged steel construction, precision-ground needle roller bearings and extra-long pistons, precision oil metering, and high-flow, quick-reacting check valves. Cam Motion lifters are available in factory tray/retainer-styles and tie bar-styles.
( 8 )
$766.32
On Sale
FiTech presents Ultimate LS standalone ECUs. These self-learning ECUs are offered with and without transmission control. So if you're considering utilizing a factory intake, throttle body, and injectors, FiTech Ultimate LS standalone ECUs will get your engine ready for optimal performance.
( 51 )
$959.00
$815.15
South Bend Clutch Dyna Max organic clutch kits are manufactured with performance organic friction material. Designed to provide smooth clutch engagement, these Dyna Max organic clutch kits include the necessary parts you need to do the job—and many kits include Kevlar® pilot bushings. The kits are available for a variety of clutch styles and applications and may come with or without a flywheel. Select the kit to fit your application needs.
( 101 )
$824.77
—
$986.46
McLeod RXT Street Twin clutch kits are ideal for the extreme horsepower enthusiast who wants performance and economy. Capable of handling up to 1,000 hp, the RXT Street Twin clutches are for those who've kicked it up another notch—but still require streetability. The ceramic facing on the clutch discs provides slightly aggressive engagement with a soft pedal effort, making these clutches suitable for most street performance enthusiasts. Match your vehicle specs to the correct model from McLeod. Additional features include: * Alignment tool * Lighter-than-stock pedal feel * Available with dedicated flywheel or adapter ring for factory flywheel * CNC-machined and anodized flywheel adapter ring * Smooth engagement with excellent release qualities * Ceramic facings on disc increase holding power over similar organic linings * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 47 )
$995.00
Meziere 300 Series electric water pumps are the Big Daddy of electric water pumps. They're capable of flowing 55 gpm--enough for a 600 hp oval track car or a 2,200 hp Pro Mod. They have larger internal passages and heavy-duty motors and are available in radiator, remote mount, or engine mount versions. These pumps feature CNC-machined aluminum housings, epoxy coated motor windings, an RF suppression circuit, and a one-piece, carbon-ceramic seal.
( 83 )
$818.43
On Sale
FiTech Ultimate LS Loaded intake manifold kits are just like the systems, but without the ECU and hand-held controller. FiTech Ultimate LS Loaded intake manifold kits will have: * Low-profile 92mm or 102mm (750 hp kits only) inlet aluminum fabricated intake with 1,500 to 6,500 rpm powerband, 3mm construction, TIG-welded, black anodized with embossed FiTech logo * CNC-machined with O-ring gaskets and hardware included * High-flow cable operated 92mm or 102mm (750 hp kits only) throttle body * Parabolic inlet machining for smooth throttle transitions, same as OE * Throttle body features progressive linkage pulley with double-return spring and adjustable stop * Billet fuel rails with AN fittings and fuel crossover * 36 or 55 (750 hp kits only) lbs./hr. flow-matched injectors
( 6 )
$965.00
$820.25
Summit Racing™ Pro SBC LS firing order hydraulic roller retrofit cams are available in seven stages--from a small smooth idle cam capable of towing, to a big duration stomper that's ready to go bracket racing. Utilizing the LS firing order on a traditional small block Chevy improves the engine in several ways, including exhaust sound and harmonic improvements. These kits include a premium camshaft and drop-in link bar style hydraulic roller lifters. Best of all: these Pro SBC LS firing order hydraulic roller retrofit cams are precision-ground in the USA on USA billets! Order the cam recommended or your application.
( 2 )
$941.83
DeWitts Pro-Series direct-fit aluminum radiators provide a 25 percent increase in cooling performance. They include features like two rows of one-inch wide cooling tubes, press-formed end tanks, serpentine fins, and factory-type upper and lower channels—and they're epoxy-free! Each radiator core is assembled and brazed in a state-of-the-art aluminum brazing furnace. DeWitts Direct Fit is the company's official trademark, and it means your radiator will fit without modifications.
( 166 )
$805.99
—
$996.99
On Sale
Holley LS throttle bodies are unquestionably the biggest bore and most feature-loaded option available. Holley went back to the drawing board and built the ultimate air valve for your LS engine. They are available with huge 105mm or 95mm bores--and low rpm, drive-friendly tapers. The 105mm version is designed for drag race applications when wide-open throttle is all that matters. Features like idle bleed adjustment, TPS clocker, and PCV passage defeat valve units, making them the ultimate throttle bodies for ease of installation and tuning. Regardless of whether you have a turbo, supercharger, or a big cam engine sucking gulps of air, Holley LS throttle bodies are manufactured from high-grade billet aluminum, and black anodized to give them a modern tech look, they're maximized for your application.
( 11 )
$849.95
$763.95
On Sale
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$898.86
$762.92
—
$912.93
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
