Availability
Showing In Stock Items. Show All 13 Items.
Edelbrock E-Force supercharger kits use a positive displacement supercharger that is capable of producing over 500 hp. These kits include the supercharger with Eaton internals, a manifold, drive pulleys, a belt, and all necessary items for installation. Edelbrock E-Force superchargers are designed to provide more horsepower per pound of boost than their competitors, from off-idle through the rest of the rpm range. Plus, their internal bypass valve practically eliminates parasitic loss, consuming less than 1/3 of one horsepower at 60 mph. NOTE: They are not compatible with HEI distributors.
( 8 )
$3,644.95
Vortech supercharger systems for GM LS-Swaps operate at an even higher level of sophistication than any original equipment system. They're currently one of the most popular engine swap power plants in the world. In every application, the LS systems have established themselves to be fantastic platforms to swap into just about anything. They operate at an even higher level of sophistication, with a boost curve generated by Vortech's superchargers that are ideally matched with today's highly evolved engines and give you power when you need it. The supercharger and the technologically advanced subsystems fully integrate into the vehicle's existing platform, yielding a smooth continuity of power and performance.
( 3 )
$3,915.99
PowerMax Performance Diesel turbochargers supply your light-duty diesel with the best components for optimizing power, response, and efficiency. PowerMax turbochargers are quick-spooling, high-flowing turbochargers with the right blend of design features that will upgrade power and torque, while lowering EGTs for select diesel trucks. Whether you own a Ford, Dodge, or GM diesel pickup truck, PowerMax has a ball-bearing turbocharger for you! Turbocharger and installation instructions, as well as other components needed for your specific application are included. Features and benefits of PowerMax turbochargers: * Large bore inducer--allows greater airflow for high performance diesels with increased fuel flow * Advanced design compressor wheels--extremely high-efficiency, backward-curved impellers, which allow for a broad airflow range to match the needs of diesels * Exclusive true angular-contact ball bearings--meaning the turbo spools up to 15 percent faster, is capable of high-thrust loads seen in high performance/high-boost applications, and increases overall turbo efficiency by reducing power consumption by nearly 50 percent over traditional journal bearing designs * Performance enhancing oil restrictor--optimizes oil flow for proper lubrication and cooling, while limiting turbo rotational drag which robs power and efficiency * Divided turbine housing--divider wall within the turbine volute optimizes pulse gas energy, which gives greater response and turbine efficiency during low-end and mid-range operation * Ultra-high pressure/high-efficiency turbine--extracts a maximum of energy from the engine's exhaust. Using GMR235 super alloy, the turbine wheel design is optimized for high exhaust flow, and low weight to reduce moment of inertia assisting in crisp response to changes in engine speed * Turbine outlet connection--designed to fit as a direct drop-in to enhance the ease of upgrading stock turbos * Turbine heat shielding--PowerMax utilizes a heat shield to create "dead air space" insulation barrier to keep high exhaust heat energy in the turbine to be converted to mechanical energy, and away from bearings and oil * Design optimized turbine housing--advanced 3D modeling and computational fluid dynamics are used to optimize the volute shape, and the housing is also equipped with an adjustable wastegate allowing adjustment for optimum boost levels * Oil control and seal--a double-row flinger which drives drain oil away from the gas seal rings virtually eliminates compressor oil sealing problems
( 3 )
$3,371.99
Now you don't have to run a cumbersome roots-style supercharger on your vintage muscle. Vortech's carbureted centrifugal supercharger kits are designed to bring the performance and compact fit associated with late model fuel injected kits to vehicles equipped with carbureted engines. In most cases, these kits will fit under your stock hood without modifications. The heart of each kit is either a gear-driven V-1 S-Trim head unit or a gear-driven V-7 YSi-Trim head unit, unless otherwise noted. The cast aluminum carburetor enclosure assembly pressurizes the float bowls and throttle shafts for seamless response, and is designed for use with Holley 4150 or Demon 750 MD carburetors. The enclosure features front and rear -8 AN fuel inlet ports as well as provisions for pressure and vacuum connections. Linkage arms, a splined shaft, left/right hand spherical rod ends, and carburetor studs are included for simple throttle connection and adjustment. The included oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger. They also feature a 6061-T6 billet aluminum supercharger crank pulley, pulley spacer, and an automatic belt tensioner.
( 1 )
$4,319.99
Maximize your diesel truck's performance and pulling power with aFe BladeRunner turbochargers. The turbochargers are optimized for maximum boost response, as well as overall power. The compressor housings are made of premium cast aluminum and feature a ported shroud design that eliminates dangerous compressor surge. Each of these turbochargers feature specifically designed trims that are aimed at maximizing power and throttle response for your given power goal. For maximum boost response and the ultimate torque delivery, aFe BladeRunner turbochargers will help you get there. Order the model that is best suited to your application needs.
Not Yet Reviewed
$2,098.95
aFe BladeRunner GT Series intercoolers feature a bar and plate core design that outflows stock intercoolers by increasing heat dissipation over the much smaller tube and fin design used by the OEM. The unique BladeRunner end tanks are constructed out of 3/16 in. aluminum plates that incorporate seven Multi-Directional Vanes (MDV) throughout the intercooler. This aFe technology is used to direct hot air flow through the entire intercooler core, which allows for greater cooling. aFe BladeRunner GT Series intercoolers are100 percent TIG-welded by certified craftsmen for race-quality strength and durability. They are pressure tested at 200 psi.
( 5 )
$2,300.55
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
