Availability
Showing In Stock Items. Show All 235 Items.
Pro Series flywheel bolts from ARP give you all that you need to bolt in your flywheel with confidence. They're much stronger than OEM hardware, forged from aerospace alloy, and are heat-treated prior to thread rolling and machining. These bolts feature an exclusive, flat 12-point head design and a larger-than-stock shank diameter for increased strength and improved flywheel register.
( 369 )
$30.99
—
$54.99
TCI introduces a fresh line of quality filler tubes. Applications for the most popular Ford, GM, and Chrysler transmissions are available. Most of the dipsticks feature a locking stick that satisfies sanctioning bodies' racing rules. The rubber boot seal is a vast improvement over the small O-ring typically used on older OEM tube designs.
( 186 )
$44.95
Summit Racing™ bellhousing separator plates are designed for Ford small block engines. These plates are precision-cut from aluminum or steel for durability and also feature special ventilation holes for improved air circulation. They provide the correct fit in small blocks to locate the engine components in just the right place. Summit Racing™ bellhousing separator plates are engineered to work with automatic transmissions, and fit both 157-tooth and 164-tooth flexplates.
( 85 )
$52.99
These premium-grade ARP Pro Series flexplate bolts are far superior to OEM hardware. Forged from aerospace alloy and heat-treated prior to thread rolling and machining, they feature an exclusive, flat 12-point head design and a larger-than-stock shank diameter for increased strength and improved register.
( 327 )
$24.99
—
$58.99
Summit Bucks
ACDelco Gold automatic transmission fluid filters can help to ensure the reliability and performance of your automatic transmission. These filters trap impurities that may be present in the fluid before they get pumped through to the moving components of your transmission, thus avoiding damage. On-time maintenance can extend your transmission's life and keep it operating efficiently. Perform service with ACDelco Gold automatic transmission fluid filters.
( 49 )
$25.99
—
$45.99
All Steeda clutch cables features a stainless steel inner cable and a low-friction PTFE lining, along with a high-durometer bushing at the firewall for improved clutch response and cable life. Steeda manufactures these cables using the finest stainless steel to ensure performance and durability.
( 12 )
$69.95
TransGo's Performance shift kits give you the hard-launching, tire-blazing shifts you want, after just a few hours' work with basic hand tools. TransGo even has kits for computer-controlled, 4-speed automatics. Their performance shift kits can be installed with the transmission in the vehicle and they come with complete instructions. Some kits even include a step-by-step video to walk you through the installation process.
( 503 )
$50.14
These ARP bellhousing bolt kits are designed to securely hold your transmission bellhousing in place on the engine block. They are manufactured from ARP's durable 8740 heat-treated alloy and have a protective black oxide finish. The bolt kits come in your choice of standard hex head or smaller 12-point heads for additional clearance or to fit into tighter firewall applications.
( 249 )
$20.99
—
$56.99
On Sale
Flywheel bolts play a very important role in the performance and safety of race cars and street machines alike. That's why McLeod offers flywheel bolt kits that are far superior to OEM hardware, so you can bolt in your flywheel with confidence. McLeqod steel bolt kits offer increased strength and improved flywheel register.
( 9 )
$29.00
—
$52.00
$26.10
—
$46.80
Whether you're installing a new clutch, or you need to service your old one, South Bend Clutch offers throwout bearings that are designed to properly engage your clutch. These heavy-duty bearing replacements are made to withstand the wear and tear that clutches go through. They are available for a wide range of applications to provide reliable service and performance. Select the clutch throwout bearings designed to fit your application needs.
( 1 )
$52.23
Flexplates are important connections between your engine and torque converter, and are relatively inexpensive parts to change out when they demonstrate signs of wear. These one- or 2-piece Pioneer replacement flexplates are machined from durable steel for long-lasting performance. They're available in a wide variety of configurations for fitment with engine and transmission applications spanning six decades.
( 72 )
$39.50
—
$76.99
Remote clutch bleeder lines from Hinson Motorsports turn a tricky process into a simple one-person job! Clearing your hydraulic system of trapped air takes only minutes with these braided stainless steel lines. Just attach the 4 ft. bleeder hose to your slave cylinder and zip tie it permanently to any area you can easily reach. Afterward, you can crack open the bleeder end fitting once when needed, and close it when the air gets released from the clutch system. Verify the fitment and order the Hinson Motorsports remote clutch bleeder lines designed for your application.
( 42 )
$53.49
Forged from high-quality steel, and then heat-treated for maximum strength, these Mr. Gasket flexplate bolt kits are a must for all high-performance applications. They include lockwashers where required, and are black plated to resist rust and corrosion.
( 5 )
$22.94
Are you installing a clutch? Centerforce pilot bearings and bushings will be needed for proper installation. The bushings and bearings are made of high quality materials, available for many applications, and are direct original equipment replacements. Upgrade your pilot bushings or replacing worn pilot bearings with Centerforce.
( 38 )
$23.95
—
$28.95
Has your vehicle's governor cover from the factory reached its "term limit?" Might be time to choose a replacement from the experts at TCI Auto! Your old rusted and dented cover has seen years of abuse, so why let it ruin the looks of your engine bay? Now you can dress up your transmission governor with corrosion-resistant stainless steel. These aesthetically pleasing options are available in two styles—exact OEM replica or stamped with the TCI logo. Both include a rubber O-ring for a leak-free seal. Conceal the hole where the governor is located and hold it in place on the transmission with a beautiful stainless cover from TCI.
( 44 )
$20.95
Our Summit Racing™ flexplates are a top-quality choice when replacing your stock unit. These flexplates are constructed from durable, high-strength steel and are ideal stock replacements. NOT FOR MARINE APPLICATIONS.
( 46 )
$42.99
These TransGo valve body separator plates feature increased hole sizes that correspond with positioned openings for first and third plates for optimum shifting performance. They also have additional openings to reroute transmission oil in the various interrelated passages in the casing in order to decrease the shift time and produce quick, reliable shifts every time. Make your transmission work more efficiently with one of these TransGo valve body separator plates.
( 90 )
$24.43
—
$29.57
Centerforce pressure plate bolt kits feature premium-grade material and a black oxide finish. These bolts fit directly to the flywheel and are available in different sizes to work on a wide variety of applications.
( 10 )
$23.95
—
$35.95
Summit Racing™ LS Crankshaft Pilot Extensions are an adapter bushing that extends the end of the crankshaft pilot allowing you to use an older-style GM automatic transmission on your LS1 engine. Summit Racing™ LS crankshaft pilot extensions have steel construction and tapered fit to provide long wear and an uncomplicated installation.
( 6 )
$28.99
ICT Billet LS flexplate bolt sets are high-strength for your high performance applications. The bolts are offered in standard and extended-lengths.
( 8 )
$25.99
—
$29.99
On Sale
McLeod throwout bearings are engineered to provide dependable performance that stands up to the wear and tear placed on clutches. They are available for a variety of applications to suit your needs.
( 64 )
$51.00
$45.90
Summit Bucks
ACDelco automatic transmission shift solenoid valves are GM-recommended replacement components. Keeping your transmission shifting and operating efficiently is crucial to the overall life of vehicle. These original equipment solenoids will provide the same performance, durability, and service life you can expect from a General Motors direct part.
( 5 )
$25.99
Ford Performance Parts roller pilot bearings are direct replacements. When you install a new clutch, one of these bushings will help you obtain less friction and longer life from the assembly. Order the roller pilot bearings machined for your engine model.
( 36 )
$24.99
Summit Bucks
ACDelco GM Genuine Parts flywheel and flexplate spacers are designed, engineered, and tested to rigorous standards and backed by General Motors. These true OE replacements will help to reposition the flywheel, allowing for appropriate clutch pedal height and assembly location. They provide proper engagement and disengagement of the clutch during vehicle operation, aiding in optimal shifting. The spacers offer factory fit and performance in specific GM vehicles.
( 2 )
$49.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
