Availability
These Delphi camshaft position sensors feature a digital output design for maximum signal to noise ratio. They are not impacted by temperature changes and provide long-lasting sensor protection. These Delphi camshaft position sensors are also manufactured to meet or exceed OE requirements to ensure quality and long-lasting durability.
( 13 )
$20.99
—
$54.99
Delphi ignition coils will definitely spark a response! Precise spark timing offers increased fuel economy and faster crank-to-run. These coils provide accurate electrical energy to create a voltage potential at the spark plug—and that provides you with superior engine performance, better control over emissions, and fuel economy. You'll get the OE performance, durability, and electromagnetic capacity level that your vehicle requires with Delphi ignition coils. Order the model designed for your vehicle application.
( 78 )
$20.99
—
$57.99
Delphi ignition knock sensors maximize your engine's performance--regardless of fuel quality! Their knock sensors hear various knock frequencies under many operating conditions to detect shifts and provide an accurate signal to your engine control module. The sensors meet or exceed OE requirements and reduce potential damage to your internal engine components. Knock, knock-- who's there? Engine. Engine who? Engine gonna buy me a Delphi ignition knock sensor? Listen to your engine--choose Delphi.
( 30 )
$22.99
—
$49.99
Are you experiencing hard starts, stalling issues, rough idle, or hearing a slight pinging within your engine? Don't panic. It may be related to a bad throttle position sensor. Delphi throttle position sensors are designed to sense throttle movement and change of position. They also regulate various engine and vehicle operations, including spark timing, air and fuel ratio, torque converter lockup, air conditioning, and idle speeds. With that said, throttle position sensors are an important component, and if your existing sensor seems to have gone bad, just swap it out for a new one from Delphi.
( 13 )
$30.99
—
$52.99
Delphi engine coolant temperature sensors are top-quality, direct fit OE replacements, which are designed to eliminate connection and failure points. With a one-piece, lead-frame design from the sensing tip to the connector terminals, these units equip your vehicle with a proven design that's built to last. They put the engine under fuel control operation quicker and reduce harmful cold-start emissions by 40 to 50 percent. Delphi engine coolant temperature sensors are built to last, even under the toughest conditions, to endure the long haul. Improve reliability, durability and fuel economy with Delphi.
( 17 )
$20.99
—
$28.99
Add Delphi fuel injection idle air control valves to control the airflow into your engine. Delphi OE replacement valves provide a superior fit and finish that result in an easier installation for you. Their idle air control valves meet federal emissions regulations, increase your fuel efficiency, and eliminate the potential for malfunctions. Get control over the amount of air allowed to flow into your engine, and your engine idle speed, in a variety of load conditions when you replace your air control valves with Delphi fuel injection idle air control valves.
( 34 )
$30.99
—
$48.99
Replace your worn-out distributor cap with the enhanced performance of Delphi distributor caps! Like all Delphi ignition components, these high-quality distributor caps help to improve performance, power, and economy and reduce exhaust emissions. Delphi offers distributor caps for a wide range of applications.
( 5 )
$30.99
—
$52.99
Delphi fuel pump wiring harnesses are designed to connect your factory wiring harness to the new fuel pump. They're manufactured from quality materials and use pre-terminated connections for a direct-fit installation. Order the harness recommended for your application.
( 1 )
$22.99
Delphi oxygen sensors will help you get your car up and running in no time. The engineers at Delphi designed these oxygen sensors to use OEM connectors and threads for easy installation in your car. Their unique sensor coating resists contamination to create oxygen sensors that are long-lasting and reliable. Whether you are replacing your exhaust and just want a new sensor or are replacing a worn-out unit, these Delphi oxygen sensors are for you.
( 44 )
$26.99
—
$60.99
Clearance
Tie rod ends are crucial parts to your steering system, so you need to maintain them with the utmost care. Delphi's replacement steering tie rod ends are manufactured from high-quality material to meet the same standards in fit, performance, and longevity as the original equipment part. They're available in a range of applications to help maintain superb control, resulting in a safe and smooth ride. Order the Delphi parts recommended for your year/make/model for improved steering performance.
( 15 )
$30.99
$20.99
—
$56.99
Replace worn suspension parts to improve safety and ride comfort. Delphi control arms utilize robotic welding for consistent performance and quality. Build from materials such as steel and cast iron, the arms are available in a variety of styles—including stock, stamped, and forged. Anti-corrosion protection is applied to each part to ensure longevity. Rubber or rubber/steel bushings are included with most models. Order the OE-type replacement specified for your vehicle application.
( 12 )
$20.99
—
$53.99
Delphi vehicle speed sensors offer an accurate, clean signal input to your vehicle's ECM. Their designed digital output gives the maximum signal to noise ratio and they will maintain optimal performance during drastic temperature changes for robust, long-lasting sensor protection due to their single-element design. Delphi vehicle speed sensors provide quality materials, extended life, improved reliability, and superior drivability.
Not Yet Reviewed
$20.99
—
$56.99
Delphi steering pitman arms are designed with safety and precise fitment in mind. They're tested to the extreme for OE performance at every turn, withstanding temperatures below -40 degrees C and over 120 degrees C—as well as exposure to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensure the very best compatibility between the factory and aftermarket part. These durable steel pitman arms are available for a wide range of vehicle-specific applications.
( 2 )
$21.99
—
$49.99
Delphi rack and pinion bellows are necessary components of your steering system. These quality rubber coverings seal in lubricants, while keeping moisture and dirt out to maintain long-lasting, reliable performance of your rack and pinion. Delphi offers a variety of bellows to cover many applications.
( 3 )
$20.99
—
$28.99
These Delphi fuel pump strainers are designed to keep dirt, dust, and other particles out of your fuel pump and away from your fuel system. They are manufactured from quality materials and install easily in the factory location.
( 12 )
$20.99
—
$27.99
Delphi replacement idler arms are direct-fit components for your steering system. They're manufactured from quality materials for strength and durability. These arms are available in a variety of configurations for fitment on specific applications.
( 2 )
$22.99
—
$52.99
Delphi suspension stabilizer bar end links enhance your ride-quality and control. These OE replacements are built and tested to the extreme for the correct performance and long-lasting service on your vehicle. Delphi parts withstand temperatures below -40 degrees C, over 120 degrees C, and are exposed to 720 hours of salt spray. Utilizing their extensive dimensional and material analysis ensures Delphi stabilizer bar links provide the best compatibility between OE and aftermarket.
( 10 )
$20.99
—
$48.99
Delphi ball joints can make the difference between safely getting where you're going and a really bad day. These joints are used extensively for many OE and aftermarket steering systems. They're thoroughly tested in extreme temperatures, put through 720 hours of wicked salt spray, and driven over various terrains, ensuring top quality. Delphi ball joints use exacting dimensions and top-quality materials to ensure longevity and safety for all of your valuable cargo.
( 18 )
$20.99
—
$57.99
Failed spark plug wires contribute to rough idle, misfire under load, and poor fuel economy. Replace those aging originals and get back on the road with a Delphi XS ignition wire set! They use Delcore, composite high-temperature, or wire-wound OE cable configurations with application-correct 7mm and 8mm cable sizes. OE boots, terminals, and lead lengths make installation easy. Delphi XS ignition wires offer reliable, hassle-free performance you can depend on. Order the set designed for your vehicle application.
( 6 )
$25.99
—
$48.99
Delphi control arm bushings are designed, engineered, and manufactured to OE-quality standards. With safety and cost-effectiveness in mind, they use only the highest quality materials, balancing precise quantities of steel and rubber for optimum strength, flexibility, and noise reduction tailored to the application they are to fit. Through a rigorous cleaning process, a strong chemical bonding, and extensive fatigue testing, Delphi control arm bushings will supply your vehicle with a comfortable, quiet ride, as well as improved stability and safety.
Not Yet Reviewed
$20.99
—
$48.99
Delphi offers suspension coil spring seats/insulators for a wide range of applications. These standard replacements undergo extensive dimensional and material analysis to ensure the very best compatibility to the OE part. They're tested for 250,000 cycles to check braking force, cornering force, and suspension travel movement. The aftermarket parts are exposed to 720 hours of salt spray for optimum protection against corrosion, and feature an additional cataphoretic coating for enhanced aesthetics and greater protection against corrosion. Delphi suspension coil spring seats/insulators can withstand temperatures from -40 to 248 degrees F. Order the model recommended for your vehicle.
Not Yet Reviewed
$20.99
—
$44.99
Delphi alignment cam bolt kits are designed and engineered to assist in aligning your vehicle's wheels. These heavy-duty cam bolts replace the upper control arm mounting bolts, and are manufactured from quality material to meet the same standards in performance and longevity as the OE part. Order the kit recommended for your year/make/model.
Not Yet Reviewed
$23.99
Delphi automatic transmission speed sensors provide accurate speed readings in any situation on the road. Stop guessing how fast you're going, before an officer shows you a ticket. Replace your faulty sensor with a Delphi automatic transmission speed sensor.
Not Yet Reviewed
$25.99
—
$34.99
Delphi torsion bar mounts are precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles. Delphi's extensive dimensional and material analysis ensures compatibility between the OE and aftermarket part. The stock torsion bar mounts wear out over time and need to be replaced. So, if your torsion bar is making clunking sounds due to vibration, secure the bar with better mounts from Delphi. Choose the model recommended for your vehicle application needs.
Not Yet Reviewed
$26.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
