Availability
Showing In Stock Items. Show All 760 Items.
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 20 )
$24.99
The chain of command between a crankshaft, camshaft, and engine valves is central to your vehicle's basic movement—which is why it's so important to protect the timing belt. Fel-Pro timing cover gaskets provide a tight seal to keep contaminants out of the gear shaft area. They're offered in hundreds of single or multi-piece sets for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs; gaskets for industrial use are also available. Ideal for stock replacement (not intended for racing applications), Fel-Pro gaskets are made from materials such as fiber, cork, and rubber. Choose the kit which corresponds to your year/make and engine application.
( 541 )
$50.99
Red Line GL-5 gear oil has been engineered to provide the highest degree of protection and improvement of your differential efficiency. Formerly Lightweight gear oil, this new formula contains additional friction modifiers for suitability with clutch-type limited slip differentials, and for most, no additional friction modifiers would be required. This gear oil offers excellent lubrication, a high viscosity index, and the ability to lower operating temperatures, as well as exceeding API GL-5 specifications. Reduce friction for better performance--add the improved formula of Red Line GL-5 gear oil.
( 92 )
$23.53
Red Line MTL transmission gear oil is a 75W80 GL-4 gear oil (SAE 5W30/10W30 engine oil viscosity) designed for use in manual transmissions and transaxles. MTL is a low 75W at very low temperatures, and a high 80W, nearly an 85W, at elevated temperatures, providing adequate viscosity to prevent wear and deaden gear noise. Overall, this gear oil offers excellent protection of gears and synchronizers, and its balanced slipperiness provides a perfect coefficient of friction, allowing easier shifting.
( 71 )
$23.10
With Summit Racing branded all 100% silicone 8mm constructed wire, a 300ohm per foot wire wound EMI suppression core, high heat silicone boots and stainless steel and brass terminals, you get all the high end features a wire set can offer, without breaking the bank! The dual silicone High-Tear resistant jacketing with fiberglass matting, gives you the highest heat protection and superior terminal pull off values in the business! With our 300ohm per foot Wire-Wound magnetic suppression core, you can be sure of maximizing the voltage output of your ignition system, while maintaining high EMI resistance values. Stainless steel terminals with Posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery. Ultra High heat silicone spark plug boots provide superior radiant heat protection. High dielectric strength properties virtually eliminate voltage leakage and blow through. With all of these features built into our Summit Racing high-end 8mm sets, along with Made in the USA workmanship, you can be assured that installing one of our sets will give you the confidence and reliability you have come to expect from Summit Racing products.
( 1009 )
$49.99
—
$55.99
Mahle Original rear main seals are high-quality rear main seals designed to replace your factory seals. They are constructed from high-quality materials to meet or exceed OE standards and are designed to provide long-lasting durability and performance. If you're looking for high-quality replacement seals for your vehicle, Mahle Original rear main seals are your solution.
( 25 )
$31.99
Fel-Pro rear main seal cover gaskets are designed to fit between the engine block and rear main seal cover. They are manufactured from quality materials and install in the factory location to ensure a direct fit.
( 38 )
$29.99
McGard wheel locks protect your valuable wheels and tires from theft. Having your wheels and tires stolen could leave you stranded in a bad place at the wrong time. These easy-to-use, one-piece steel wheel locks function like regular lug nuts—but require a special key tool for installation and removal. Order the size and style designed for fitment on your studs, then travel with peace of mind, courtesy of McGard wheel locks.
( 229 )
$27.99
Summit Racing™ timing cover gasket kits provide a tight seal to keep contaminants out of the gear shaft area. They're offered for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs. Choose the kit which corresponds to your year/make and engine application.
( 30 )
$40.99
TCI introduces a fresh line of quality filler tubes. Applications for the most popular Ford, GM, and Chrysler transmissions are available. Most of the dipsticks feature a locking stick that satisfies sanctioning bodies' racing rules. The rubber boot seal is a vast improvement over the small O-ring typically used on older OEM tube designs.
( 186 )
$44.95
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 79 )
$37.99
—
$39.99
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 133 )
$52.99
Sealed Power A-Series rod bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank with a surface that hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better wall variance control. It also helps to minimize debris embedding, which can score the crank's surface. Order the replacement bearings designed for your vehicle make and engine application.
( 33 )
$34.99
ACDelco DEXRON-VI automatic transmission fluid is the most recent release in the well-established DEXRON Series of automotive transmission fluids. It provides more consistent shift performance, even in extreme conditions, and degrades less over time. DEXRON-VI helps automatic transmissions last longer and perform better. Fully licensed and approved by GM, it is recommended for use in GM transmissions model year 2006 and newer calling for DEXRON-VI automatic transmission fluid (replaces DEXRON-III and DEXRON-II(E)), and recommended for any transmission that calls for DEXRON-VI, III, or II(E). ACDelco DEXRON-VI automatic transmission fluid is not for use in CVT (Continuously Variable Transmissions) or DCT (Dual Clutch Transmissions) that require specialized fluids. Features: * Good frictional characteristics and wear protection provide enhanced cold-temperature performance, excellent friction retention and smooth shifting. * High oxidation resistance fortifies against rust and corrosion and provides for longer fluid change intervals. * Wide range of seal compatibility – can be used in an extensive variety of vehicles/transmissions. * Meets requirements for foam protection and protects against metal-to-metal friction and wear within the transmission.
( 80 )
$35.99
Fel-Pro headbolt kits contain a complete set of the highest quality headbolts and hardened washers available. They're cold-formed to ensure molecular integrity, then heat-treated prior to thread rolling and machining. Reduced-diameter bolt heads eliminate the need for valvetrain removal and facilitate cylinder head re-torquing. The bolts are available in a variety of head styles for fitment on specific vehicle and cylinder head applications.
( 216 )
$28.99
B&M offers a full line of shift levers, cable brackets, and assorted linkage components everything you need for installing your B&M shifter. Or they can be used as replacements for lost or damaged parts. B&M parts are made to fit a wide variety of applications, so you're sure to find what you need.
( 187 )
$27.14
—
$49.95
Yukon Gear & Axle gear lube keeps you rolling smoothly. Choose from various products to lubricate your positraction application and combat the stress of stop-and-go driving.
( 24 )
$39.89
—
$49.89
Summit Racing offers replacement thermostats for thousands of vehicles. They're offered in a variety of styles, materials, flow rates, temperature ratings, and more. A reliable thermostat is essential to your cooling system and overall performance—kicking in precisely when your engine needs it. Order the model best suited for your application.
( 358 )
$42.99
—
$49.99
Mahle Original offers a choice of cylinder head gaskets to fit your project with the most effective, leak-free seal. Because vehicles and performance levels are as different as the people who drive them, a head gasket that works for you may not work for another. Mahle Original knows this. Their list of head gasket materials includes multi-layered steel, Solicor, VR-2000, Nitroseal, and VR500. Each does their job differently, but you can rest assured that the sealing job they do will be effective and efficient. Positive sealing is available with Mahle Original cylinder head gaskets. Order the style designed for fitment with your vehicle and engine application.
( 45 )
$46.99
On Sale
Mr. Gasket offers replacement water necks in a variety of styles, materials, finishes, sizes, and angles. Water necks help to hold the vehicle's thermostat in place as it opens and closes—to regulate the flow of coolant through your engine. The opening in the water neck created by the thermostat allows coolant to flow from the radiator back to the engine. Order the model recommended for your vehicle.
( 113 )
$41.68
$27.09
—
$49.95
Summit Bucks
Delphi ignition coils will definitely spark a response! Precise spark timing offers increased fuel economy and faster crank-to-run. These coils provide accurate electrical energy to create a voltage potential at the spark plug—and that provides you with superior engine performance, better control over emissions, and fuel economy. You'll get the OE performance, durability, and electromagnetic capacity level that your vehicle requires with Delphi ignition coils. Order the model designed for your vehicle application.
( 78 )
$34.99
—
$47.99
This Motul Gear 300 LS 75W90 oil is 100 percent synthetic lubricant designed for all mechanical transmissions of high performance and racing cars. It can be used for synchronized or non-synchronized gearboxes, gearbox/differentials, transfer gearboxes, and hypoid differentials with limited slip systems operating under shock.
( 1 )
$22.75
Summit Racing™ truck shocks are designed specifically to give your truck a factory-quality ride, both on and off-road. The twin-tube, hydraulic-action shocks feature multi-stage valving and are available for front or rear positions. They're offered in a variety of extended and collapsed lengths for stock-height and lifted applications. All truck shocks come standard with red polyurethane bushings and boots.
( 121 )
$36.99
Keep your camshaft from wandering with Melling camshaft thrust plates. These solid steel plates protect your engine investment by returning your timing back to the desired specifications. Proper positioning of your camshaft is crucial. Don't let your cam walk--replace worn camshaft thrust plates with new ones from Melling.
( 38 )
$30.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
