Availability
Showing In Stock Items. Show All 30 Items.
Holley ECU mounting brackets allow you to comfortably install either the Dominator ECU, Holley HP, Terminator X, or Terminator X-MAX under your Mustang's front passenger seat. They're designed to work with stock seats and seat tracks (modified/race seats may or may not accommodate them). You simply route all your ECU harnesses through the firewall--properly route the wires, install the unit followed by the ECU, and then reconnect your wires and go! Use your laptop to fine-tune the ECU without popping the hood and protect it from engine bay heat with Holley ECU mounting brackets. Order the brackets recommended for your application.
( 3 )
$110.95
On Sale
SCT Performance blank dropship-only computer modules are shipped to you blank, so that your custom tuning provider can install the programming you need for your engine.
( 2 )
$220.00
$169.99
ICT Billet ECM bench reader diagnostic tuning tool harnesses provide quality connections to ensure proper engine operation and easier diagnoses. Cheaper wire connectors may offer poor quality and conductivity issues, making your job harder. Don't chance it; choose ICT ECM bench reader harnesses. Features and benefits include: * Assembled with OEM-grade TXL wire * Plug-and-play for GM (Gen 3) LS series engine computers * Allows engine computer to be flashed and tuned off the vehicle * Assembled with OEM tooling, OEM Delphi connector, lock, seals, and terminals using OEM harness wire colors * Requires 12 V power source, using power and ground wire, and tuning cable/software for OBDII port
Not Yet Reviewed
$197.99
JET Stage 2 performance chips/modules have been programmed to deliver peak power increases under hard throttle conditions, such as towing and wide-open throttle. These modules offer a full-range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno tested to ensure the most possible power without affecting day-to-day drivability. Stage 2 power chips/modules must use the following for proper performance: * 180 degree thermostat * 91 octane or greater fuel * Free-flowing exhaust
( 111 )
$292.46
JET Stage 1 performance chips/modules are designed to add up to 25 hp instantly with simple, plug-in installation. Only the JET Performance modules provide exclusive, full-range Dynamic Spectrum Tuning of the air and fuel ratio, ignition advance, transmission, and various other parameters. Each program is track and dyno-tested to ensure the most possible horsepower and drivability from each application. Choose the one right for your vehicle.
( 98 )
$281.21
—
$284.96
These V-Force Plus power control modules are designed for the performance enthusiast who wants improved performance, acceleration, and the ability to monitor vehicle information. V-Force Plus power control modules are designed around a 20 MHz RISC processor. V-Force Plus power control modules optimize ignition advance and fuel maps for optimum horsepower and drivability. In addition, the software in the program allows you to select from 14 different screens to monitor throttle position, mass airflow, manifold pressure, fuel economy, and air/fuel ratio. This allows you to monitor your driving habits for the best fuel economy and performance.
( 12 )
$299.96
Dinan offers throttle boosters for a wide range of vehicles, including many BMW, Toyota, and Mini Cooper models from 2001 and up. Throttle response/sensitivity preferences vary wildly from one person to another. While others may think the throttle curves integrated into their software offerings are perfect, you may not feel the same. Don't settle—take matters into your own hands and design your own custom throttle curve catered to your personal needs. These boosters are equipped with five preset throttle curves for easy adjustment from the wireless control switch (or app), so you can quickly select a throttle mapping option that works for you. If those aren't ideal though, you also have thousands of potential curves you can build yourself in the associated iOS/Android app. Save up to three of those customizable curves directly onto the device—and throttle options for numerous and varied situations are at your fingertips instantly. Best of all, the Dinan throttle booster installs in minutes and is fully reversible. A richer, more enjoyable driving experience has never been easier to attain! Product details: * Wireless control switch with associated mobile apps for Android/iOS * Fully user-customizable throttle curves * Increases accelerator pedal response over stock * Reduces dead pedal feeling (acceleration lag) * Works with stock or modified vehicles * 5 preset throttle curves and 3 customizable throttle map curves * Connects to the throttle harness, leaving your OBDII port free * Quick and easy installation
Not Yet Reviewed
$269.95
APR software is traditionally installed on-location by your local APR dealer, but not everyone has one. With the APR Remote Tuning Service (RTS), APR or a participating dealer can remotely tune your engine (ECU) or transmission (TCU) anywhere in the world! Simply purchase the APR RTS installation cable and set up a remote tuning session! They're available for a wide range of vehicles, including many Audi, Bentley, Lamborghini, Porsche, and Volkswagen cars and trucks from the 1990s and up.
Not Yet Reviewed
$159.95
Rick's Motorsport Hot Shot CDI ignition boxes are available for a variety of powersports applications. These Hot Shot series boxes offer an assortment of performance upgrades. Hot Shot CDI ignition boxes provide hotter spark and advanced power curves, allowing your machine to rev up to an additional 1,000 rpm over redline. They may also be used to replace defective CDI boxes on stock machines.
( 4 )
$104.95
—
$229.95
FAST MAP sensors, by monitoring intake manifold vacuum, measure the amount of load being placed on the engine. They relay engine load output to the ECU, which in turn adjusts fueling for optimum performance and economy. Choose between 1-bar, 2-bar, 3-bar, and 5-bar MAP sensors.
( 10 )
$131.95
Cardone Remanufactured ABS control modules are designed to meet or exceed OE performance. Reverse engineering provides insight into how and why the unit originally failed, allowing their engineers to identify and correct factory design flaws. Every Cardone Remanufactured unit goes through stringent testing, ensuring like-new performance and quick reaction time when traction control is required. Over 50 models are available; order the anti-lock braking system control module recommended for your vehicle.
( 2 )
$211.99
Summit Bucks
ACDelco Gold remanufactured body control modules are high-quality replacements for many vehicles on the road today. Remanufacturing is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new parts. In addition, damaged and obsolete parts are replaced and end-of-line tested to ensure they perform to factory specifications. These Gold remanufactured body control modules will offer the same fit and performance you expect from ACDelco.
Not Yet Reviewed
$158.99
Motorcyclists, connect your Daytona Twin Tec controllers to your laptop with these special USB interface cables. They include all required adapters for ignition and fuel injection systems. These cables allow you to easily interface with all Dayton Twin Tec engine controls.
Not Yet Reviewed
$119.95
Clearance
These Dorman remanufactured transfer case control modules are pre-programmed out of the box and install easily with plug-and-play wiring connectors. Factory transfer case control modules typically fail through corrosion under normal use; this results in the inability to shift in or out of 4WD mode. The modules are fully stress-tested for durability, so you can be sure that your 4WD won't get stuck in or out of gear next time.
( 19 )
$395.99
$193.50
These performance modules from JET will improve the performance of your Ford car or truck with very little work. Perfect for vehicles with little or no modifications, they're programmed for power increases under hard throttle conditions such as towing and wide-open throttle. They offer a full range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno-tested to ensure the most possible power without affecting drivability or fuel economy.
( 46 )
$284.96
Rick's Motorsport CDI ignition boxes are designed as OEM replacement ignition boxes for an array of powersports applications. These CDI ignition boxes mount in the majority of stock locations. Rick's Motorsport ignition boxes are sold complete, including all wiring to establish all necessary connections. Rick's Motorsport CDI ignition boxes are very dependable and are used by many powersports enthusiasts.
Not Yet Reviewed
$174.95
—
$219.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
