Availability
Showing In Stock Items. Show All 92 Items.
Antigravity Batteries Re-Start batteries have built-in jump-start and full management systems. They intelligently monitor their own voltage, and just before going completely dead, they promptly initiate sleep mode with just enough energy to get your vehicle started again. Simply press the restart button located on the battery, start your vehicle and drive away. These are extremely lightweight and high-power lithium-ion replacements for your heavy lead/acid batteries. They're available for most modern motorcycles and ATV/UTVs. No more dead battery emergencies or being stranded with Antigravity Batteries Re-Start batteries! Features and specs: * Up to 2 times the cranking power and lifecycle of heavy lead/acid batteries * Up to 70 percent lighter than heavy lead/acid batteries * Management system offers low-voltage cutoff, over-charge/over-discharge protection, lithium cell balancing, and thermal protection * 4 terminal posts for ease of use with right or left side connections and any orientation (no liquids to spill) * Capable of holding a charge for up to one year when no parasitic drains (alarms, GPS, etc.) are present * Shock and vibration resistant for durability * No acids or heavy metals for lower environmental impact
( 13 )
$354.99
—
$449.99
If your starter is no longer engaging your Harley's® engine, get it involved with All Balls Racing high-torque starters. They're manufactured with all-new components fine-tuned for starting your Harley-Davidson® V-Twin engine. Make it the perfect performance union with All Balls Racing starters. The high-torque starters feature: * Clutches with 20 percent oversize rollers * Idler gears manufactured from cold-headed steel * End-frames which are cold-chamber die-cast and precision-machined * Armature hairpins resistance-fused to the commutator * A 10/32 in. threaded output shaft * Conversion bolt for the earlier 1/4 in.-20 threaded output shafts * Choice of finish, including chrome or black powdercoat
( 3 )
$364.21
—
$500.94
Mikuni HSR Easy Kits offer bolt-on performance with pre-jetted and ready-to-run carburetors. These uniquely designed kits utilize your stock throttle cables for a quick install, and to retain your motorcycle's original appearance. The HSR flatslide carburetors deliver excellent throttle response and control. The smoothbore allows the engine to reach its full power potential, so you accelerate and pass with confidence. You'll get good gas mileage and many years of dependable, carefree performance. Mikuni HSR Easy Kits are designed to work with your original Harley-Davidson® intake manifold, choke cable, air cleaner, and throttle cables. You can run other high performance air filters designed for the CV-type carburetors by using the special adapter included in the kits.
( 6 )
$366.99
—
$378.99
Built around a 4-piston, high performance powerhouse, these Wilwood GP310 billet aluminum calipers bring distinctive, bold styling. Stainless steel pistons are employed to reduce brake fade while resisting corrosion, and high-temperature piston seals are utilized to extend life, control retraction, and provide drag-free operation. Additional features include bright finish bleed screws and hardware, plus an exclusive anti-rattle pad clip. The included low-dust, low-noise brake pads are designed to operate in the widest range of temperatures and environments, utilizing Wilwood's industry-leading stainless steel rotor-compatible formulation.
( 8 )
$272.00
—
$543.71
S&S Cycle Teardrop air cleaner kits offer classic looks matched with performance. Efficient and free-flowing, these kits feature dimpled aluminum chrome covers with directional air cones on the inside to create smooth paths of airflow. All the while, their uniquely designed back plates feature air horn style radiused entryways to reduce turbulence. Wrangle some additional horsepower and timeless style for your bike with S&S Cycle Teardrop air cleaner kits.
( 3 )
$296.96
Burly Brand Stiletto shocks were created to give your bike the attitude and suspension travel that a proper corner-eating machine needs. The high performance damper is wrapped in a spring combination designed specifically to deal with subtle road noise and imperfections, while the main coil handles the big hits and controls bottoming. The result is a plush ride that's not afraid to play rough.
( 1 )
$293.21
Wiseco powersports piston kits include your rings, piston pin, and circlips. Wiseco has a decade of experience producing quality pistons for dirt bikes, ATVs, snowmobiles, outboard marine engines, and motorcycles. Their piston kits provide strong, lightweight pistons with optimized designs that improve engine efficiency and maximize your torque and throttle response. Plus, Wiseco powersports piston kits are produced right here in the USA. It's time to blaze your own trail with Wiseco powersports piston kits.
( 6 )
$326.97
—
$360.97
S&S Cycle Super E and G Teardrop air cleaner kits offer trademark looks matched with performance. These kits feature S&S Cycle's classic teardrop covers, constructed from aluminum and chromed for great presentation. The specially design dimpled covers not only look good, but also feature directional air cones on the inside to create smooth paths of airflow. Plus, the uniquely designed back plates feature air horn style radiused entryways to reduce turbulence. You'll have an efficient, easy path for intake air to follow into your carburetor. Maximize airflow, possibly add a few horses, and definitely add timeless style with S&S Cycle Super E and G Teardrop air cleaner kits.
Not Yet Reviewed
$285.26
S&S Cycle standard forged rocker arms are designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller arms are available in the stock 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.
Not Yet Reviewed
$294.26
Dyna 2Ki Programmable Ignitions not only add to, but extend, many features of the Dyna 2000 modules with a completely new design that fits under the cam cover. Every time power to the ignition is switched on, the 2Ki checks to see if the coil is shorted, mis-wired, or of the wrong type. If an error is detected, the 2Ki will immediately switch off and issue a warning. After starting, the 2Ki continuously monitors the status of the coil and wiring. All 2Ki ignitions are PC programmable: * 8-point fully-definable wide-open throttle curve * 8-point fully-definable part-throttle curve * Rev limit programmable in 50 rpm steps * Programmable dead cranking revs 0-10 * Programmable rear cylinder offset, total of +/- 10 degrees Data recording functions: * Total engine hours * Time at wide-open throttle * Number of engine starts * Longest time operating at wide-open throttle * Maximum rpm * Seconds near rev limit * Statistical analysis of time at rpm Additional features and benefits include: * Single-fire operation down to zero rpm for easier cranking and kicking * Operates in all combinations of single-fire or dual-fire with single plug or dual plug heads (when used with appropriate coils) * Eight advance curves to cover a broad range of engine builds and riding styles * Over-rev protection adjustable from 6000 to 7500 rpm * Adjustable timing retard for nitrous and turbo applications * VOES indicator; shows the status of the VOES switch, also indicates when retard mode is active * Built-in tach driver delivers stable tach signal even during rev limiting; can be used to activate shift lights, auto shifters, and other accessories * Easy static timing with built-in timing indicator (no timing light required) * Intelligent over-current and short circuit protection * Active dwell control continually adjusts coil current to maintain maximum spark energy up to redline while eliminating coil stress caused by overcharging at idle * High-efficiency design reduces battery draw for easier cold weather starting and lower charging system load * Ruggedized output--cannot be damaged by broken or disconnected spark plug wires * Over-voltage protected against momentary spikes (positive and negative) as well as surges caused by faulty voltage regulators or quick-charge battery boosters * Harness constructed with TXL cross-linked polyethylene automotive wire for exceptional resistance to abrasion, heat, and chemical attack * High-temp glass-braid jacket further increases the toughness of the harness and provides a tight, clean appearance * Wire colors closely match the factory harness for error-free installation * Manufactured with premium-quality components designed for operation in a high-temperature, high-vibration environment * One-piece aluminum housing and thermally-conductive epoxy encapsulation provide superior heat dissipation and outstanding shock, vibration, and moisture resistance * Advanced microprocessor technology * Quartz crystal accuracy.
Not Yet Reviewed
$418.99
S&S Cycle billet oil pumps are designed and built for your V-Twin. They feature a smoother design from beautiful strong billet and pressure relief towers that are .300 in. shorter than your OEM oil pump. Kits may include: * Pump with cover * Mounting bolts * Supply and return gears * Driveshaft with keys and snap rings * Check ball and spring * Pressure relief valve and spring * Check ball and release valve cover screws with O-rings * Miscellaneous hose fittings, plugs, screws, and gaskets
Not Yet Reviewed
$395.06
S&S Cycle Hi-4N ignitions are one-piece machined aluminum housings that reduce vibration and improve heat dissipation and reliability. Features: * Improved kick-start algorithm designed to start as easily as points * BCD switches with solid detent * Legible markings allow easy and repeatable adjustments of mode, advance rate, and rev limit * Single-fire and dual-fire function built into a single module * Flexible wiring harness makes installation easier
Not Yet Reviewed
$370.76
—
$510.26
Mikuni HSR-48 carburetor race kits are designed for the serious race engine builder and extreme street motor enthusiast looking for more power. They're recommended for 120 cu. in. engines or bigger with high-flow heads and cams—or if your heads have been flowed to require a 270 cfm flow rate. These kits include a 48mm smooth bore carb, rubber mounting flange (78mm bolt hole centers), choke cable, and four main jets. (Builder supplies manifold and appropriate air filter or velocity stack.) Uses stock Harley-Davidson© CV-type cables.
Not Yet Reviewed
$370.99
Now you can enlist your own creepy skeleton hands to hold your mirror heads in perfect position. The Kuryakyn Skeleton hand mirrors feature detailed arm bone stems and hands that look amazingly realistic. Their wrist joints provide smooth and sturdy mirror adjustments to help keep you aware of your surroundings. Kuryakyn Skeleton hand mirrors are available in different combinations of chrome or black hands with chrome or black mirror heads.
Not Yet Reviewed
$279.99
Daytona Twin Tec internal ignitions mount in the nose cone while replacing the factory ignition. The results are a cleaner look by having less visible wire. This is good news to the custom builder. These ignitions feature adjustable advance modes and slopes that work on stock to modified applications. Daytona Twin Tec internal ignitions are protected by a billet aluminum housing and works with your factory rotor. Other features: * Digitally set rpm limit set in 100 rpm increments * Selectable single or dual fire mode * Selectable kick start mode * Selectable multi-spark mode for quick starting and smooth cruising * Coil outputs protected against short circuit * Optional USB interface and software for custom advance programming
Not Yet Reviewed
$345.95
HardDrive 96-06 hand control kits provide a clean look. These redesigned controls feature hidden mounting hardware on the switch housings and smooth mounting clamps. They are available for 1996-06 models with or without switches and are not interchangeable with OEM controls. Also, many are offered in chrome or black finishes. Choose the appropriate HardDrive hand controls for your motorcycle year.
Not Yet Reviewed
$267.26
HardDrive billet oil pumps feature a split oil path that applies more pressure to the top end for longer component life, and increases oil pressure to the hydraulic lifters. They are made of polished, CNC-machined cast aluminum and include a driveshaft with keys and a snap ring, mounting hardware, check ball, gaskets, and pressure relief valve assemblies. These pumps avoid unnecessary filtering by routing back to the main passage, rather than the return. HardDrive oil pumps are a great value in quality aftermarket Harley® parts.
Not Yet Reviewed
$433.76
Daytona Twin Tec Model 1006 and 1007 external ignition kits are external plug-in ignition modules for 1990 and later Harley-Davidson® Evolution Big-Twin and 1990-1993 Sportster models. They offer a wide timing advance adjustment range that accommodates stock to highly-modified engines. Features include: * Digitally set rpm limit in 100 rpm steps * Selectable single or dual-fire modes * Selectable multi-spark mode for quick starting and smooth cruising * Coil outputs protected against short circuits * Available USB interface and software for programming custom advance curves (sold separately) * Billet aluminum housing with black anodized finish * Easy plug-in installation
Not Yet Reviewed
$421.95
Are you looking to improve your bike engine's breathing capability by installing an open element air filter? HardDrive Coned Ram-Air air cleaners are custom-made, tilt-forward air cleaners. They feature a 4.5 x 12 in. CNC billet aluminum housing available in your choice of finishes, along with high-flow air filters, and 90 degree manifolds. When you increase efficiency, power and economy also improve. Coned Ram-Air intake units are available for fitment on a wide range of Harley-Davidson® motorcycles.
Not Yet Reviewed
$316.76
—
$395.96
High-capacity air cleaner housings are used to supply fresh air to an engine. Based on the popular open element air cleaner, HardDrive Chopped Ram-Air air cleaners are dedicated to attaining maximum performance from your motorcycle. These custom-made, tilt-forward air cleaners feature a 4.5 x 10 in. CNC billet aluminum housing in your choice of finishes, along with high-flow air filters, and 90 degree manifolds. When you increase efficiency, power and economy also improve. Chopped Ram-Air intake units are available for fitment on a wide range of Harley-Davidson® bikes.
Not Yet Reviewed
$296.96
—
$361.76
Cometic Gasket complete EST gasket kits utilize their Extreme Sealing Technology. They are proven through state-of-the-art research and development processes and validated on the street and track. Their complete gasket kits include the necessary gaskets, seals, and O-rings to rebuild your engine. Kits are available with or without head and base gaskets. Select the complete EST gasket kit designed for your application.
Not Yet Reviewed
$353.56
For stock or high performance, S&S hydraulic tappets offer significant design improvements to withstand the forces, reduce the stress, and solve the possibility of oil starvation. S&S hydraulic tappets feature larger inner bearing races, an improved inner race-roller design, a redesigned and stronger plunger assembly, and revised metering devices for precise oil delivery control. Each lifter body and plunger assembly is hand-fit and then pressure-tested to insure correct operation. Choose the better features of S&S hydraulic tappets for better performance.
Not Yet Reviewed
$343.76
—
$368.96
HardDrive Easy Start kits provide a better gear ratio for better staring. The kits include a clutch basket with a bearing, a 66T starter ring, and a 9T starter pinion. These components will improve the starting on your high-compression engines by improving the starter-to-clutch basket gear ratio. Get going easier with HardDrive Easy Start kits.
Not Yet Reviewed
$336.56
Simplify your ignition, toss your points, and put one of these Dynatek Dyna S ignition and coil kits in your Harley®. Accurate timing and ease of maintenance make these kits a favorite of record-setting top road and drag racers. Replace your points and condensers with these high performance ignition kits. The DYNA S kits are completely contained ignition systems, are housed behind your ignition cover, and use a magnetic rotor with the original spark advancer, so that the factory advance curve is maintained. These are complete kits, with nothing more to purchase, and they come with complete and comprehensive instructions. Get rid of your point setup and join the Dynatek team.
( 1 )
$298.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
