Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
1998 FORD MUSTANG Parts and Accessories
Showing In Stock Items. Show All 103 Items.
Summit Racing™ Aluminum Driveshafts
Get your hot rod, track car, or daily driver moving with Summit Racing™ aluminum driveshafts. Recommended for applications putting out up to 700 lb/ft of torque, they are constructed from aluminum to reduce overall weight, which translates into more power getting to the wheels where it can do its job! We use the best seamless tubing to ensure the ultimate in strength and rigidly. Whether you are looking for another tenth or two off of your ET, or just better throttle response in your hot rod, Summit Racing™ will take care of you with aluminum driveshafts.
( 201 )
$405.99
Lares Power Rack and Pinions
Lares offers brand new power rack and pinions for a variety of applications. Engineered to OE specifications, each unit is inspected, adjusted, and hydraulically tested. These assemblies convert the rotational motion of your steering wheel into the linear motion needed to turn the wheels. Rack and pinions are backed with a Limited Lifetime Warranty (or one-year for commercial use). Order the model recommended for your vehicle.
( 9 )
$377.99
Ford Performance Parts Driveshaft Assemblies
Ford Performance Parts driveshaft assemblies feature reduced overall weight and rotating mass that frees up horsepower and provides quicker acceleration, higher speeds, and lower ETs. They feature heavy-duty, 6061 aluminum, seamless drawn tubing and include high-strength U-joints or flange yokes. Available for a wide variety of Mustang applications, they are designed for increased horsepower applications to deliver exceptional strength and reliability. Depending on application, features include: * 1330 or stronger 1350 high performance U-joints * 28-spline or 31-spline yokes * 3.5 in. diameter * 0.114 in. or 0.125 in. wall thickness * Spline and slip design allows for installation and suspension movement * Hard plastic boot to keep grease in and water out; protects spline and slip from contaminants * Eliminates the need for a center support bearing * Direct bolt-in * Fully assembled and balanced
( 18 )
$462.99
Procar Series 1614 Seats
Procar Series 1614 seats are perfect to reinforce a traditional, classic look for your interior. They feature stylish vertical stitching, sleek lines, and side bolsters for maximum support and comfort. The adjustable bucket seats incline and recline via lever control. Each seat is built with TIG-welded steel tubing, injection-molded foam, and suspension straps for support and comfort; and sliders are included. Procar Series 1614 seats are available for the driver or passenger side, in a choice of material and colors.
( 3 )
$305.99
QA1 Mustang K-Members
Replace your heavy stock K-member with one of these tubular QA1 Mustang K-members and, in addition to the weight savings, you'll get better steering geometry, less bump steer, reduced dive under braking, and quicker straight-line performance. Ideal for street performance, autocross, pro touring or drag racing, they easily bolt onto factory components without any wheel or tire fitment changes. Features and benefits include: * All mounting points are digitally-indexed from new factory K-members * Made from high-quality, American-made, high-strength, low-alloy steel (HSLA) steel * Weighs only 25 lbs.--over 50 percent lighter than stock K-members * Increased header and oil pan clearance for easier maintenance and installation * Modular design for versatility--bolt-in engine mounts can easily be swapped for future engine changes * Improved geometry--maintains optimum anti-dive and minimizes bump steer with selectable rack height and optimal control arm positioning * Ideal for Mustangs with a lowered stance * Retain the factory wheel base Note: For best results, QA1 control arms are strongly recommended
( 31 )
$479.95
—
$593.95
Flowtech X-Terminator Off-Road X-Pipes
Flowtech X-Terminator off-road X-pipes were first offered for manual transmission Mustang owners looking for that X-treme advantage in competition situations. Their unique, mandrel-bent, cross-pipes are formed from 16-gauge aluminized tubing for greater flow and a classic sound. They feature a direct bolt-on design that uses OEM routing and hangers. Due to popular demand from non-Ford enthusiasts, Flowtech added its line of universal X-Terminator X-pipes in 2.5 in. and 3 in. tube diameters. Features include: * Direct bolt-on design for select late model Mustangs (manual transmission models only) * Distinctive sound * Increased exhaust velocity * Adjustable cut-to-fit for use on a variety of applications * Easy installation
( 3 )
$255.95
Steeda Rear Sway Bars
Steeda rear sway bars will give you the confidence you need to attack the corners that get in your way. Steeda engineered each bar to give you maximum stability, while controlling your ride's body roll, giving you predictable handling in all situations. Installation is easy and handling is drastically improved. Don't sacrifice handling when you can upgrade your sway bars and be ready for the turns ahead.
( 7 )
$249.95
QA1 Sway Bars
QA1 sway bars afford improved handling and control by reducing body roll. They're manufactured from lightweight 4130 chromoly steel and 1045 cold-formed steel—with a gloss black powdercoat finish for maximum strength, endurance, and corrosion resistance. The QA1 sway bars are precision CNC-formed, ensuring proper mounting in the stock location for a true bolt-on installation. They also feature adjustable end links to customize roll stiffness to your personal specifications. These sway bars from QA1 include greaseable graphite polyurethane bushings, along with high-quality zinc plated hardware. Engineered and road-tested to give your ride the grip that it needs to hold the road, QA1 sway bars are available for fitment on many vehicle applications. Order them individually for the front or rear—or in a complete kit.
( 139 )
$279.95
—
$529.95
Eibach Anti-Roll Sway Bar Kits
Complete your suspension upgrade with Eibach anti-roll sway bar kits. They reduce body roll over stock bars through increased design stiffness. The result is better handling and cornering grip in any performance-driving situation. Eibach sway bars are manufactured from cold-formed steel alloy for precision performance, and finished with a long-lasting red powdercoat. Order the Eibach anti-roll kit designed to fit your application. Product features: * Depending on application, some kits come complete with all mounting hardware, while others may require separate mounting kits * Unimpaired spring comfort at bilateral spring deflection * Decreasing the load difference between the wheels inside and outside the curve * Impacting the under- or over-steering tendency positively (auto-steering behavior)
( 72 )
$568.00
VEGE Remanufactured Cylinder Heads
VEGE Remanufactured cylinder heads are a popular choice for performance and value. With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured cylinder heads with a level of quality that equals that of new OEM products—at extremely competitive prices. The rebuilt cylinder heads are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include a cast iron or aluminum cylinder head, intake and exhaust valves, valve springs, retainers, locks, stem seals, rocker arm studs, and more. Many heads include rocker arms. Nearly a thousand models are available, for fitment on countless applications.
( 43 )
$432.99
—
$461.99
Hooker RacingHeart Chevy Swap Long Tube Headers
Hooker RacingHeart Chevy swap long tube headers are race-only components. They include mandrel-bent tubing and thick flanges, plus they're offered in two materials and four different finishes. Order the model preferred for your application. Hooker RacingHeart long tube headers feature: * 2 1/8 in. mandrel-bent primary tubes and long transition 3 1/2 in. collectors with merge spears for increased exhaust velocity * 3/8 in. thick header flanges for strength and maximum sealing surface * Available in natural or polished 304 stainless steel, as well as black painted or ceramic coated mild steel * Gaskets and hardware included * For use with AJE K-member and engine mounts
( 4 )
$778.95
—
$819.95
Steeda Weld-On Subframe Connectors
Steeda's full-length subframe connectors are perfect for daily drivers or serious cars with high-horsepower, sticky tires or a competition suspension. Steeda starts with beefy 1.5 x 2 in. square tubing that spans the full length of the floor pan, providing unmatched chassis rigidity, improved handling, and improved ride quality with reduced impact harshness. Steeda's subframes are reinforced at each bend and include Steeda's exclusive torque box reinforcing plate for the strongest attachment possible to the rear subframe for maximum effectiveness. Steeda's full-length subframe connectors also feature a one-piece reinforced seat bolt cross brace. Steeda's cross braces have reinforcing gussets built in for greater strength with less welding, making for an easier installation experience. These Steeda full-length subframe connectors come with all mounting point tabs pre-welded to the subframe connectors. They come available in bare steel or black powdercoated finishes.
( 4 )
$259.95
On Sale
Flowmaster Stainless Steel American Thunder Exhaust Systems
Flowmaster Stainless Steel American Thunder exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is Flowmaster's use of mandrel-bent tubing. Their tubing allows for superior exhaust gas flow, while their stainless steel construction allows for their corrosion-resistant qualities. These American Thunder exhaust systems also feature a stainless steel muffler(s) that'll give you plenty of Flowmaster sound.
( 306 )
$562.95
On Sale
WeatherTech AVM Universal Cargo Mats
Get cargo area protection with WeatherTech AVM Trim-to- Fit cargo mats! These mats protect your vehicle's cargo area carpeting from wear and tear, moisture and stains, and help prevent your cargo from shifting and tipping. These cargo mats feature a textured finish along with tall outer ridges and channels to contain spills and dirt. Made from a soft, flexible compound that won't curl crack or harden even in sub-zero temperatures; these mats contain no harmful PVC's, cadmium or lead, and are 100 percent recyclable! These trim-to-fit, high quality cargo mats are available in a choice of colors to compliment your interior.
( 4 )
$73.95
$66.56
On Sale
Flowmaster American Thunder Exhaust Systems
Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.
( 548 )
$819.95
Baer Brakes Track4 Disc Brake Systems
Baer Brakes Track4 disc brake systems give your front wheels stopping power and visual appeal! The Track4 systems feature a large 4-piston caliper and 13 in., one-piece rotors built to accurately dissipate heat for big brake performance at a great price. Baer calipers are manufactured in the USA from strong aluminum with stainless steel pistons to reduce the thermal transfer of heat to the brake fluid—and they have stainless steel abutments and anti-rattle (spring tension) clips. The rotors feature curved vanes for added stability, and they pull in air for cooling. High-grade, quality hardware is included; they use standard, off-the-shelf replacement pads. Get the most for your money, plus American craftsmanship--choose Baer Brakes Track4 disc brake systems, available for a wide range of bolt patterns and vehicle-specific applications.
( 1 )
$1,849.95
McLeod Street Twin Clutch Kits
McLeod Street Twin clutch kits are designed to be high performance replacements for your OEM clutch. They include everything you need--a new disc, pressure plate, and your choice of a billet steel or billet aluminum flywheel. McLeod Street Twin clutch kits are pre-balanced to fit specific applications and include the correct alignment tool for installation.
( 4 )
$1,195.00
BMR Subframe Connectors
BMR subframe connectors are some of the strongest in the industry. Their innovative design ties together key structural points across the floorpan, minimizing flex. BMR subframe connectors are fabricated from heavy-duty, rectangular tubing for frame rigidity and improved handling ability.
( 65 )
$239.95
—
$389.95
Baer Brakes Baer Claw Pro+ Disc Brake Systems
Baer Brakes Baer Claw Pro+ disc brake systems are built to please the most demanding users. They include Baer 6P compact 6-piston calipers machined from 2618 forgings, resulting in the stiffest possible design, even at extreme operating temperatures. They use radial mounting configurations to disperse loads evenly, and internal fluid transfer tube passages for an ultra-clean look. Baer Claw Pro+ disc brake systems include brake rotors with zinc coated surfaces and a matched set of brake pads. The unique 2-piece rotors use an aluminum hat to reduce overall weight, allow for differential expansion of the rotor plates, and lower thermal transfer to the hub. Nearly 700 models are available for specific vehicle, bolt pattern, and axle applications.
( 8 )
$2,453.95
—
$3,022.95
Baer Brakes SS4 Disc Brake Systems
Baer Brakes SS4 disc brake systems deliver superb stopping power. These systems feature their S4 4-piston calipers mounted to a slotted, drilled, zinc plated rotor (see diameters). Baer systems include unique billet backing plates that not only act as caliper mounts, but also house the banksia (one-piece) park shoe--a more modern and better working park brake assembly (on rear kits). Baer Brakes SS4 disc brake systems are completed with stainless steel brake hoses and the proper banjo fittings, and come in a choice of red, black, or silver powdercoat for the calipers.
( 3 )
$1,649.95
Kooks Headers Race Long Tube Headers
Kooks Headers race long tube headers will deliver high performance to your racer. Their full-length race headers are built from T-304 stainless steel and are available in several primary tube and collector diameters to match your application needs. Optimize scavenging and increase power with top-quality Kooks race long tube headers.
( 66 )
$1,581.20
—
$1,599.60
Pedders Extreme XA Coilover Kits
Pedders' renowned expertise plus advanced technology equals XA Extreme coilover kits that let you click, tune, and play! These height-adjustable coilover shocks are built to Pedders' stringent quality standards. They feature sports-calibrated tunable damping, motorsports coil springs individually tuned to suit each application, and a host of other high performance features—including engineered mounting bracketry. Plus, shocks have a 30-position adjustable bump and rebound damping setting which offers a fine-tuned suspension that's ready to play with just a click of a button. For the performance enthusiast, Pedders XA Extreme coilover kits are a great fit. Order the kit designed for your vehicle application.
( 13 )
$1,529.96
Nolathane Sway Bars
Sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires, resulting in increased cornering grip and improving outright performance. Nolathane sway bars give you more grip, which produces better handling, translating to improved outright performance. Upgrading the sway bar is the best dollar-for-dollar handling improvement you can make to your vehicle. Added benefits extend to improvements in handling, safety, and tire wear without affecting ride quality or comfort.
( 38 )
$229.87
—
$249.87
On Sale
WeatherTech All-Weather Floor Mats
WeatherTech All-Weather floor mats have deeply sculpted channels designed to trap water, road salt, mud, and sand. They are made from an advanced rubber-like thermoplastic elastomer compound that is an OEM-approved, virtually odorless, latex-free material, that contains no harmful PVCs, cadmium, or lead and is 100 percent recyclable. All-Weather floor mats are engineered to stay flexible in even the coldest of temperatures and feature a protective, non-stick finish to make cleanup quick and easy. To prevent shifting, they include anti-skid ridges on the underside of the mat. WeatherTech mats are manufactured in America to ISO 9001 standards, and also meet FMVSS302 standards--your assurance of quality. Choose from black, tan, or gray to complement virtually any interior color; available for cars, trucks, minivans, and SUVs. All-Weather floor mats are intended to give the best possible protection for your vehicle's floor. Many WeatherTech front and rear mat applications are model specific, while others are the best possible fit for the vehicle from their many shapes and sizes. Some rear mat sizes are designed to be trimmed so that they may be customized to fit almost any vehicle.
( 116 )
$48.95
$44.06
