Availability
Showing In Stock Items. Show All 76 Items.
On Sale
ACCEL Performance fuel injectors provide precise control of fuel delivery and atomization for increased power, improved throttle response, and better fuel economy. They feature either a high or low-impedance design to function accurately with your vehicle's ECU. ACCEL fuel injectors come complete and ready for installation with precision-molded O-rings and fine-mesh fuel strainers. More product features and notes: * Utilize a new low-mass disc design that ensures a spray pattern for ultra-fine atomization and improved burn efficiency * Higher than stock flow rates may require reprogramming
( 219 )
$92.19
—
$474.95
Summit Bucks
Fel-Pro fuel injector O-ring sets help maintain performance vehicle. These replacement rings are engineered to offer a good, tight seal and prevent fuel leakage into hot engine compartments. Over time, your factory O-rings can become worn or cracked—leading to erratic fuel injection. Update the small accessories with the Fel-Pro set recommended for your vehicle and engine application.
( 9 )
$5.99
Add Delphi fuel injection idle air control valves to control the airflow into your engine. Delphi OE replacement valves provide a superior fit and finish that result in an easier installation for you. Their idle air control valves meet federal emissions regulations, increase your fuel efficiency, and eliminate the potential for malfunctions. Get control over the amount of air allowed to flow into your engine, and your engine idle speed, in a variety of load conditions when you replace your air control valves with Delphi fuel injection idle air control valves.
( 34 )
$36.99
—
$68.99
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 49 )
$109.99
K&N inline fuel filters are designed for high-volume, low-pressure fuel systems. They're constructed of high-quality materials to withstand normal gasoline. Available with a sintered bronze, paper, stainless steel mesh, or polymer-coated paper element, K&N inline fuel filters screen out those harmful particles that can cause engine damage. For replacement or upgrade, order the model recommended for your vehicle application.
( 95 )
$19.99
ACDelco offers fuel injector retaining clips in a variety of styles. These factory-style replacements are designed for many vehicles from the 1980s and up. Machined to correct original specs, the metal clips secure the injectors to the fuel rail of your GM vehicle. They're available individually or in larger set quantities.
( 4 )
$13.99
US Motor Works in-tank fuel pump kits for domestic and import applications include all of the components required to rebuild your existing fuel pump module or hanger/sender assembly. All units are manufactured using the highest quality raw materials that are compatible with today's fuel blends. Plus, US Motor Works is an ISO 9001:2015 certified company. In addition to the fuel pump, all US Motor Works in-tank fuel pump kits include: * New strainers for each application * Gaskets * New wiring harnesses made with high-quality materials * High-quality fuel injection lines included with hose clamps * Nitrile or Viton® rubber components for long life and fuel resistance
( 5 )
$50.99
ACDelco Gold fuel tank caps are premium aftermarket parts to help seal your vehicle's gas tank filler and are high-quality replacements for many vehicles on the road today. Manufactured to meet your expectations for fit, form, and function, the ACDelco Gold line offers both standard and locking caps that are all keyed alike, providing you with the extra benefit of security. Choose an extra-tight seal and deter theft with ACDelco Gold fuel tank caps.
( 1 )
$28.99
ACDelco GM Genuine Parts vapor canister purge valves are GM-recommended replacements for your vehicle's original components. The purge valve controls the flow of fuel vapor from the vapor canister to the intake manifold. These original equipment parts have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Order the model designed for your vehicle to restore reliable, safe operation.
( 3 )
$37.99
UREMCO fuel injector O-rings enable you to avoid leaks when replacing or servicing your fuel injectors. They're made from quality materials to resist high temperatures and chemical exposure for reliable, optimum performance. The O-rings are available for a variety of applications. The direct replacements meet or exceed OEM specifications—and are highly recommended whenever fuel injectors are swapped out. Order the model and quantity needed for your vehicle.
( 4 )
$9.99
—
$21.99
RESTOPARTS® Supplied air filter elements are designed to improve performance. Breathing dirty air is unhealthy, especially for your classic's engine. RESTOPARTS® offers many authentic reproductions in original paper style to deliver clean air with the exact fit--even for your Tri-power. Many are also available with aftermarket cloth that can be cleaned and recharged with oil for reuse. Order the size and filter material recommended for your application.
( 1 )
$23.79
ACDelco GM Genuine Parts fuel injector O-ring and seal kits contain the necessary replacements to service a fuel injector. They help provide liquid-tight connections between the injector and related parts. These OE kits are GM-recommended for specific applications, manufactured to provide the performance, durability, and service life you expect from General Motors.
( 3 )
$22.99
Dorman fuel vapor canister purge valves serve as part of the emission control system and measure the flow and amount of fuel vapor that are recycled into the combustion process via the charcoal canister, or fuel vapor storage device. Available for a range of applications and manufactured from premium materials for a long service life, these fuel vapor canister purge valves are engineered for a perfect fit and are a direct replacement for the original equipment purge valve. Order the model for your application needs.
( 21 )
$29.99
Fuel filters are often forgotten--yet the gasoline, diesel, or biodiesel fuels we put into our vehicles typically contain contaminants such as dirt, rust, scale, and water. Such impurities can plug fuel injectors and carburetors, resulting in serious engine problems. The contaminants often originate from dirty and rusty storage tanks, and as the vehicle ages, from corrosion within the fuel system. While important for gasoline-fueled engines, fuel filters for diesel engines are especially critical. All diesel fuel contains some water--and removing it is crucial. The primary fuel filter for any diesel engine should always be a fuel/water separator and all WIX fuel filters for diesel engines feature Quickvent water removal capabilities. Biodiesel fuels have a solvent quality and a tendency to attract even more water, and increase the need for proper fuel/water separation. Whether gasoline or diesel, help your engine run cleaner, healthier, and longer with WIX fuel filters.
( 194 )
$12.99
Dorman intake manifolds are precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. They are thoroughly tested to ensure top-quality OEM construction and superior reliability. Dorman manifolds are offered in different styles, and all will provide a trustworthy design with a perfect fit and reliable construction for your vehicle.
( 157 )
$124.95
—
$255.99
Replace your worn, cracked, or damaged fuel injector O-rings with Standard Motor Products. Your vehicle's fuel injectors operate under extreme pressures and are fitted with several O-rings to prevent leakage of fuel into hot engine compartments. The operating conditions are tough on sealing materials, and O-rings must be capable of sealing from as low as -40 degrees C to as high as +150 degrees C and be highly resistant to aggressive automotive fuels. The consequence of O-ring failure could be catastrophic, so trust your engine to Standard Motor Products O-rings.
( 34 )
$8.99
Regular replacement of engine air filter elements is important for you and your car. Air filters trap airborne particles before they enter the engine. Excessively dirty filter elements decrease engine performance and increase fuel consumption. ACDelco Gold engine air filter elements use world-class filter technology to block 99 percent of airborne dust and dirt that can harm your engine--and they're available in panel and round styles to fit most vehicles. Benefits include: * Excellent filter capacity, enhanced efficiency, consistent flow management, and high durability for outstanding performance * The ability to trap microscopic dirt that can damage cylinder walls, pistons, and piston rings * Tight seals that help prevent unfiltered air from entering your engine * Sizes to fit virtually every car, light and heavy-duty truck, and SUV on the road today * Availability for virtually all makes and models * 12-month/12,000-mile limited warranty Round-style filters also feature: * A fine mesh screen to help reduce the risk of fire caused by engine backfires * Heat-resistant plastic on the top and bottom, with special sealing beads that provide a protective seal against automotive operating environments * A radial seal for easy installation on late model vehicles
( 125 )
$14.99
ACDelco GM Genuine Parts fuel pressure relief valve caps are GM-recommended replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. These GM Genuine Parts caps provide the same performance, durability, and service life you expect from General Motors.
Not Yet Reviewed
$4.99
MotoRad pre-release fuel caps feature a breakaway provision and lost motion for crash integrity, an ergonomic handle, and a quick-on-style attachment. These features enable ease of use and reduce OBD II issues. MotoRad has had a very successful history in fuel cap innovation. Be sure that when you buy a new fuel cap, you make it a MotoRad pre-release fuel cap.
Not Yet Reviewed
$4.99
Limit nitrogen oxide emissions with Delphi EGR valves! Delphi EGR valves recirculate controlled amounts of inert gases into the intake system, where they mix with incoming air and lower the combustion temperature below the level at which nitrogen oxide is formed. They feature a robust design, constructed with stainless steel valves and components that provide resistance to corrosion, high temperatures, and wear. Delphi EGR valves are available with solenoid, torque motor, or direct current (DC) motor actuators to help meet your individual needs.
( 24 )
$131.99
—
$145.99
ATP replacement intake manifolds evenly distribute the incoming air to each of the cylinders. They ensure the proper amount of air is mixed with the proper amount of fuel, and they are ideal replacements for your vehicle's original component. They are manufactured to fit your vehicle, providing you with the same performance, durability, and service life you expect from the factory.
( 6 )
$86.99
Fram Extra Guard air filters help keep damaging particles from entering your engine and causing increased wear. They feature a dry paper element with a standard screen for durability. These air filters are designed to keep your engine running at peak performance under any driving conditions. When you're ready to replace your present air filter, order the Fram Extra Guard air filter designed for your year, make, and model.
( 81 )
$7.94
Choose the Dorman solution for replacing your EGR tubes. As part of the Clean Air Act, exhaust gas recirculation systems are a must. When in proper working order, they reduce tailpipe emissions and fuel consumption. Dorman EGR tubes feature flex expansion joints, reducing stress related to fractures, and also include sheathing (where applicable) to protect components from heat damage. That means that these primary passageways to your EGR systems offer sufficient flow for better engine performance, power, and fuel economy. Dorman EGR tubes provide answers for efficient combustion. Order the model recommended for your vehicle and engine version.
( 34 )
$48.95
On Sale
With 100 percent polyurethane top and bottom construction, these oiled, high-flow aFe Pro 5R air filter elements outperform stock paper filters—while improving horsepower and torque. The five layers of progressively finer mesh cotton gauze give a whole new meaning to incredible airflow. These filter elements are washable and reusable and are available in a variety of sizes and styles, providing incredible dust-holding capacity. Order the aFe Pro 5R air filter element model that is best suited for your application needs.
( 78 )
$88.00
$74.80
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
