Availability
Showing In Stock Items. Show All 362 Items.
Optima RedTop Starting 12-volt batteries are the ultimate power source for cars, trucks, SUVs, hot rods, and other high-performance vehicles. They're engineered with unique Spiralcell technology, delivering a stronger burst of ignition power, while extending the battery life up to three times longer than conventional models. Maintenance-free RedTop AGM batteries are sealed, leak-proof, and resistant to vibrations—so you can mount them anywhere and in virtually any position on your vehicle. Order the Optima battery designed for your application, and expect a perfect start every time.
( 1527 )
$289.99
—
$299.99
Optima YellowTop Deep-Cycle 12-volt batteries are high-performance, dual-purpose power sources. They're great for applications requiring repetitive amperage drain and quick recharging—like trucks with winches, commercial or public safety fleets, and vehicles loaded with electronics and accessories. YellowTops also power forklifts, tractors, and other heavy equipment. The maintenance-free AGM batteries deliver premium ignition starts, while sustaining high power levels even when system loads exceed the alternator output. Optima deep-cycle models are sealed, spill-proof, and can be mounted in most any position. They are far more resistant to vibrations than standard batteries, and will perform up to three times longer. For consistent power and faster recharges, order the YellowTop designed for your needs.
( 417 )
$319.99
—
$329.99
PROMAXX Performance stock replacement cylinder heads are designed to be a direct replacement for your worn or cracked heads. These are new castings, modeled off OE castings for factory fit and finish. Some applications feature a thicker deck to solve common warping or cracking issues. Instead of spending the time and money refurbishing your existing heads, use PROMAXX Performance stock replacement cylinder heads.
( 7 )
$478.00
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 908 )
$316.99
Maradyne Jetstreme electric fans feature a low-profile design to allow for turbo or supercharger installations. They use a sealed motor tested in accordance with DIN EN 60529 and are dust and waterproof to IP68. The fans utilize an S-blade design for quieter operation and have a rubber seal that eliminates vibration contact and increases airflow. Maradyne Jetstreme electric fans have all glass-filled nylon construction for maximum durability.
( 18 )
$307.12
—
$412.89
Sometimes you just want steel! Lightweight alloy flywheels can offer substantial benefits for certain situations, but sometimes they're just not your cup of tea. Maybe you're on a budget, maybe you're running a heavy drag car, or maybe you just don't need those benefits. If that's the case, McLeod has the answer. Their steel flywheels deliver all of the strength and reliability that you need, at a substantially lower price. They're neutrally balanced, but are drilled to accept balance weights for use on externally balanced engines. McLeod steel flywheels available for a wide variety of large and small engines.
( 103 )
$395.00
—
$399.00
On Sale
B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes, and are available in chrome or cast aluminum. Filter extensions are included for those applications that require the filter to be moved closer to the bottom of the pan.
( 373 )
$349.95
In 1989, Dodge and Cummins came together to make a diesel light truck for the ages. From 1989-92, Dodge coupled the Cummins to a Gertrag 5-speed manual transmission. Now, with the use of Advance Adapters Mopar NV4500 transmission bellhousing adapters, you can upgrade these earlier models to the NV4500. The NV4500 5-speed was used in heavy-duty Dodge trucks for the 1993-2007 model years, making it considerably easier to find donors over the Gertrag. These adapters feature a new 356 T-6 aluminum bellhousing and a new pilot bearing for both 2WD and 4WD applications. In addition, 4WD kits include a transfer case shift bracket and crossmember mount. To make things easier and less expensive for the consumer, these bellhousings utilize the stock clutch arm, release bearing, and slave cylinder. Modifications will be required to the NV4500 prior to assembly. The bearing retainer must be removed from the front and shortened to 4.297 in. long to prevent any interference with the hub on the clutch disk. Test-fit the bellhousing to the Cummins block to check flywheel and clutch assembly clearance. There is a 4.5 in. difference in length, so you will need floorboard modifications 4.5 in. back from the original location. Finding replacement parts and rebuild kits for Gertrag 5-speed transmissions is difficult and expensive. Change to the NV4500 transmission with the help of Advance Adapters Mopar NV4500 transmission bellhousing adapters.
( 6 )
$495.71
Air Lift LoadLifter 5000 air spring kits feature 2-ply reinforced commercial-grade bellows, which mount between the spring and frame. They can be inflated from 5 to 100 psi to level loads up to 5,000 lbs. on large pickups and vans, wreckers, ambulances, motor homes, and commercial trucks. LoadLifter 5000 kits include bellows, air lines, fittings, brackets, mounting hardware, and instructions. They're engineered for installation in about two hours. Order the spring helper kit designed for fitment with your make and model.
( 269 )
$483.99
Summit Racing™ offers Street-Strip Performance clutch kits for hundreds of cars, trucks, and vans. They're ideal for use with moderate engine modifications, including intake and exhaust upgrades, camshaft and cylinder head work, and engine management programming. These kits provide a heavier pedal effort than stock, along with improved holding capacity, making them excellent high performance replacement clutches. Order the size and options recommended for your vehicle. Additional details: * Can accommodate up to 500 hp * Dual-faced organic and ceramic disc for smooth engagement with exceptional holding capacity * Kits include a pressure plate, disc, throwout bearing (unless specified otherwise), and alignment tool
( 6 )
$328.99
Keep your cool, lose the glare, and look good doing it with one of these Summit Racing™ Sportvisor or lighted Sportvisor cab visors. Designed to fit the exact contours of your truck, their lightweight fiberglass body is finished with an easily painted white gelcoat. These truck sun visors come with self-tapping hex screws and easy-to-follow instructions. The lighted versions also include an easy-to-install wiring harness that can be completely hidden.
( 474 )
$311.99
—
$374.99
McLeod StreetPro clutch kits are excellent performance clutches for street enthusiasts. StreetPros are ideal for use with basic engine modifications, including cold-air intakes, exhaust upgrades, and engine management programming. These McLeod kits provide slightly heavier pedal effort with increased holding capacity, making them excellent factory replacement performance clutches. Order the size to match your vehicle specifications. Additional features and benefits include: * Bolt to stock flywheels * Handle up to 400 hp * Organic disc facing for smooth engagement with excellent release qualities
( 163 )
$275.00
COMP Cams Xtreme Energy cam and lifter kits are built to take advantage of the latest cam technology and provide maximum performance. Whether your use is off-roading, towing, or street performance, there are Xtreme Energy options available for you. By using an aggressive lobe profile, they provide better throttle response and more top-end horsepower than equivalent kits from other manufacturers, while delivering increased engine vacuum. Order the model designed for your vehicle and engine application.
( 388 )
$351.95
MagnaFlow diesel converters are specially formulated to control diesel exhaust. They are constructed with a ribbed body that minimizes expansion and distortion when the converter heats up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases and holds the ceramic catalyst in proper alignment. They are seam-welded close to the converter body for a strong, tight bond, and they use a monolithic honeycomb catalyst. They are designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specs and eliminate flow restrictions.
( 1 )
$480.00
These Borgeson Universal telescoping steering shafts can be used in a variety of applications and will make the installation and removal of steering system components simple and easy. By pulling or pushing on the shafts, you can shorten or increase their overall length. They meet NHTSA guidelines for collapsibility in passenger cars and add a measure of safety. The steering shafts can also be trimmed to fit shorter applications.
( 397 )
$281.80
Upgrade your existing starter's performance with a new Powermaster Ultra Duty Diesel starter. These starters are stronger, faster, and tougher! They are able to turn over the most aggressive diesel engines in the harshest of environments. Featuring a 3.80:1 gear reduction, 260 ft. lbs. of torque and 3.6 horsepower these Powermaster Ultra Duty Diesel starters can handle anything.
( 245 )
$256.99
Air Lift Load Controller II systems not only give you everything you need to install air springs on your ride, but you also give you Air Lift's low-pressure sensor. If the air pressure in your springs drops below 5 or 10 psi, the sensor will detect the drop, and kick the compressor on--automatically. You can watch it happen on the dash-mounted pressure gauge. The kits also have an onboard air compressor, air lines that will inflate or deflate at the touch of a button, plus all wiring, hardware, and installation instructions. They're recommended for trucks, vans, and SUVs.
( 25 )
$336.99
Westin Sure-Grip running boards are designed to give your vehicle a stylish look, while providing easier entrance into the passenger area. They are made of extruded aluminum available with a chrome, clear anodized, or black powdercoated finish. The boards use a 4.5 in. wide rubberized step pad for secure footing and have molded polymer end caps. They require the use of a vehicle-specific mounting kit, which is sold separately.
( 29 )
$344.99
—
$471.99
Unleash the performance in your vehicle with Spicer Drivetrain Products ring and pinion gears! They're engineered to meet the specific original equipment standards of Dana axles, delivering a perfect fit with less noise, vibration, and harshness. All Spicer ring and pinions are built to the latest Dana designs—which include premium heat-treat processes and optimal tooth profiles, plus high-grade steel to achieve maximum durability. Even in the most demanding conditions, Spicer ring and pinion gears provide quality and unparalleled performance to genuine Dana axles. Order the set designed for your specific axle model application.
( 13 )
$339.99
On Sale
Flowtech shorty headers are just the ticket for those who want the best of both worlds--top performance and a clean machine. They bolt on to your OEM exhaust system, offering real horsepower gains plus increased efficiency. These headers are made from durable 16-gauge tubing; feature TIG-welded, extra-thick 3/8 in. flanges for a leak-free seal, and come complete with premium gaskets and hardware. Plus, Flowtech Shorty headers are available in high heat-resistant black paint, ceramic thermal barrier coating or natural stainless finishes for improved rust and corrosion resistance. Additional features: * Designed as a direct fit replacement for OEM exhaust manifolds * High-flow, mandrel-bent tubes provide consistent tubing diameters for smooth flow and increased exhaust velocity Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Flowtech recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 89 )
$460.95
XS Power AGM batteries are some of the lightest racing batteries on the market. Independent test results have proven that they outperform other battery models that outweigh these power providers by up to 20 lbs. Cutting-edge lead acid battery technology produces more energy in a smaller space because each cell is compressed before case insertion, resulting in efficient power-producing packages that are completely sealed with no need to ever add water. This design is ideal for the abuse of racing, making these the batteries of choice for demanding racers and Monster Truck drivers who need top performance and reliability. When you are pushing to power the impossible, you need the non-stop capabilities of the XS Power AGM batteries best suited for your application. Product features include: * Designed to be an inch shorter than what the competition offers for fitting in places where space is at a premium * Deep-cycling ability and ultra-low internal resistance results in high cranking amps and excellent vibration resistance * Variable position mounting (except upside-down) thanks to the no-spill design * Offered in 6 V, 12 V, 14 V, and 16 V models
( 276 )
$489.99
These SCT X3 Power Flash programmers store up to three separate custom tunes that can increase horsepower, torque, and even fuel mileage! They feature a huge backlit LCD display for easy viewing of built-in data logging or real-time monitored vehicle data, and popular sensor data such as EGT, air/fuel ratio, and many other sources. The programmers back up your factory PCM program during installation should you ever need to return your vehicle to the stock PCM program. These SCT X3 Power Flash programmers can read and clear diagnostic trouble codes. They have dual analog inputs, user-adjustable vehicle parameters, and include a USB interface cable.
( 7 )
$379.00
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle.<br><br>PowerStop Z36 Truck and Tow brake upgrade kits are recommended for trucks, 4x4s, and SUVs that not only work hard, but play hard as well. They come with everything you need, including premium stainless steel hardware, for an easy, bolt-on installation. The low-dust Z36 Extreme ceramic brake pads are reinforced with carbon fiber to provide severe-duty stopping power without sacrificing everyday drivability. These pads are paired with Evolution drilled, slotted, and zinc plated rotors that keep brake temperatures down by maximizing heat dissipation, critical for those long mountain descents. Whether towing a boat or trailer, hauling for the jobsite, or tackling a tough off-road trail, you'll get an easy and affordable, bolt-on performance upgrade with PowerStop's Z36 Truck and Tow brake upgrade kits.<br><br><strong>Features and Benefits</strong><p><ul><li>This complete brake kit has been engineered to handle the added stress of towing, hauling, mountainous driving and lifted trucks</li><li>Proprietary <strong>Carbon-Fiber Ceramic Z36 brake pads</strong> enhance the strength of a typical ceramic brake pad compound to handle heavier loads</li><li><strong>Stainless-steel pad shims</strong> resist the increased temperatures common on heavy duty applications</li><li><strong>Low-dust braking</strong> validated through on-vehicle 3rd party tests in Los Angeles, showing on average <strong>30% less dust versus OE</strong></li><li><strong>Drilled & Slotted performance rotors</strong> provide maximum cooling</li><li><strong>Bolt-on upgrade</strong> for stock brakes, no modifications necessary</li><li>Includes <strong>stainless-steel installation hardware</strong> and <strong>high-temperature ceramic brake lubricant</strong></li><li><strong>Brake rotors, pads & hardware</strong> engineered to work together to increase the overall braking power on vehicles with heavier loads</li><li><strong>Rotors are zinc plated</strong> for maximum protection against rust</li><li>Buy with confidence from the <strong>originator & industry leader</strong> of brake kits</li></ul>
( 2773 )
$362.19
PSC power steering pumps greatly benefitting rock crawlers running low rpm's. These pumps are used in conjunction with cylinders and hydraulic-assist setups. With modifications, these pumps will work with full hydraulic steering. Whether interested in one piece or the entire kit, PSC power steering pumps will turn your tires, making for fun 4-wheeling. Order the universal or vehicle-specific model recommended for your application.
( 56 )
$275.00
—
$315.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
